I HAVE PROBLEM TO INSTALL WINDOW 8

TO GET INSTALL WINDOW 7 I AM FORMATING MY LAPTOP ALL HARD DRIVE PARATION
THEN IN THIS LAPTOP HAVE TROUBLE TO INSTALL WINDOW 7 AND 8 
IN THIS LAPTOP IS NOT SUPPORT TO INSATLL ANY OPERATING SYSTEM SO HELP ME HOE TO INSTALL ANY OPERATING SYSTEM IN THIS LAPTOP
 

Hi,
What your description is too general. let's make clear some thing.
1. What version of Operating System did you install before? In generally, you cannot format the boot drive, how did you format it?
2. What's the  symptom when you attempt to install Windows 7 and Windows 8?
3. There isn't any Operating System on your computer now, right?
Meanwhile, If you could boot from installation DVD, please follow below guide to try to install:
http://www.wikihow.com/Install-Windows-7-for-Beginners
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Similar Messages

  • Hi, i have problem when installing itune. it said:  Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel. please help me!

    hi,
    i have problem when installing itune. it said: 
    Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
    Please help me i can't do anything without itune

    For "Could not open key/write value" errors when reinstalling try b noir's user tip:
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
    [LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
    The technique can be applied to the branch of the registry mentioned in the error message.
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • A lot of problems after installing Windows XP using Boot Camp on a Mac Book

    I have been having a lot of problems after installing Windows XP Home Edition (2002).
    For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
    How do I fix this problem?
    Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
    A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
    D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
    ~Twilight

    ---I'm moving this topic to the Boot Camp forums.
    -Twilight

  • Hello, I have Windows 7, and I have now to install Windows 8 on my Computer, and since, I cannot make any more of update of Apple of itune in Windows 8. Nor to download  the software recent of itune... That have to I make???

    Hello, I have Windows 7, and I have now to install Windows 8 on my Computer, and since, I cannot make any more of update of Apple of itune in Windows 8. Nor to download  the software recent of itune... That have to I make???

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • HT201456 I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc.

    I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc. When I get the the choice of partitions to install Windows 8.1 on the Windows installer says that the Bootcamp partition is not valid.
    Has anyone encountered the same issue?

    BCA creates the partition as FAT, which the installer needs to format.
    Please see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 for reference. Where does it break in your case?

  • Problem in installing window 7 on macbook pro 2014

    problem in installing window on mac book pro 2014

    Hi pitambar,
    If you are having an issue with installing Windows on your MacBook Pro, you may want to read this article for help -
    How to install Windows using Boot Camp - Apple Support
    There is also a good Boot Camp help page available here -
    Boot Camp Help
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I have problems with installed applications

    I have problems with installed applications, I used to work correctly, but yesterday it just stopped working all run which came by default. could tell me I have to do to eliminate this problem?

    Try downloading another app - any free app is fine. See if that resets the other apps and allows them to work again.

  • Hello, I have problems to install Flash Player in OS X Yosemite 10.10. Installation doesn't go on over 25%. What should i do??

    Hello, I have problems to install Flash Player in OS X Yosemite 10.10. Installation doesn't go on over 25%. What should i do??

    Try what klaush67354338 suggests. I had the same problem and his workaround worked perfectly for me.

  • Equium P200-1ED - have problem with installing VGA driver

    Hello
    I have problem with installing vga video driver, each time in installion it stops on
    Version: 6,14.10,4833 and there is error poping up.........
    Please help!

    Hello
    What error message is it exactly?
    Make sure that the chipset driver and SP2 is installed at least.
    I had a similar issue that I cant install the display driver. The error message was something like the hardware is not supported
    But it was very easy to solve this problem. I installed the driver via device manager. I have selected the graphic card and choose update driver. Then I did choose the advanced installation to choose the directory by myself.
    Anyway, after restart the driver was installed and it worked. :)
    Greets

  • Problems after installing Windows 7 Professional on Thinkpad T61

    I have an old T61 that had Windows Vista installed. I wanted to use Windows 7 but didn't want to wipe out what I already had (for various reasons). So I bought a new disk drive and did a clean install of Windows 7 Professional. The disk drive is a Western Digital Blue Notebook 1TB drive. After installing the drive in the machine, I followed these instructions to install Windows 7: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74108. I chose to partition the drive into a C: drive (500GB) and a D: drive (431GB). After the install completed, I downloaded all the available Microsoft fixes (this took some time to complete).
    For the Device Driver and Application install, I used the ThinkVantage System Update option. The site indicated that Microsoft .NET Framework 3.5 with Service Pack 1 or later was required. I downloaded and installed version 4. There were additional Microsoft fixes for version 4, which I downloaded and installed also. Then I downloaded and installed ThinkVantage System Update 5.03. I then executed System Update and selected all the available updates. They all installed, except for Windows 7 Update Module KB2615763 64bit. This update, after failing, gave the option to install manually but when I click on that option I receive a pop up saying: Installer encountered an error: 0xc8000247. The title of the pop up says Windows Update Standalone Installer.
    I then attempted to install various applications on the machine: FileZilla FTP Client, Google Chrome, Notepad++, PrimoPDF were all installed without problems. When I installed a Cisco VPN Client for 64 bit machines, however, I was knocked off the network. Clicking on the WiFi symbol in the task bar showed that I had only limited connectivity to the network. I tried to do a IPCONFIG /ALL  and neither the WiFi adapter nor the Ethernet LAN adapter showed up in the list. I uninstalled the VPN Client, from the Control Panel, and was immediately able to connect to the network. An IPCONFIG /ALL now showed all the network adapters. I installed/uninstalled the VPN Client several times just to make sure that it was causing the problem of no network connectivity.
    I fgured that there might be updated network adapter drivers available to resolve the problem so I attempted both System Update and Windows Update again. System Update showed nothing available, except Windows 7 Update Module KB2615763 64bit. Windows Update had a message saying "Check for updates for your computer" but when I clicked on "Check for updates" it popped up a message saying "Windows Update cannot check for updates because the service is not running. You may need to restart your machine." I checked and the Windows Update service is running. I stopped and restarted it but received the same message when I tried to check for updates again. I rebooted the machine and tried Windows Update again. Same pop up message.
    I tried the "Fix problems with Windows Update" option in the Control Panel but received a message saying - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting. The error details say:
    Package ID: WindowsUpdateDiagnostic
    Path: Unknown
    Error Code: 0x8E5E0247
    Source: Engine
    I tried some of the other troubleshooting options and they all give similar errors - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting.
    I then thought it might be a disk drive problem so I tried to do a CHKDSK /F but when the machine reboots the CHKDSK seems to start (there is a message that says it can be interrupted by pressing a key within 10 seconds) then, before the 10 seconds are up, it ends without checking the disk and the machine continues to boot up.
    Has anyone seen any of these problems before? Did I miss something? Could this be related to the disk drive? Or missing device drivers? Bios?
    Any help with this will be appreciated.
    Solved!
    Go to Solution.

    A laptop drive that size is almost certainly an AF drive.  You can check by looking up the model's specs on the vendor's site. You can also use the fsutil command to check the drive's physical sector size and verify that the size isn't getting reported correctly - which is what usually causes the update problem.
    http://support.microsoft.com/kb/982018
    Expand the "Issue 6 Fsutil.exe tool" entry in that link for more info.  The entire KB may also be helpful.
    If my guess is actually the problem you won't have to reinstall Windows 7.  Just update - or roll back  - the driver.  You might first try going to Device Manager, selecting the storage controller, and rolling back to an earlier driver.
    If that works, configure ThinkVantage System Update to not show the offending driver, or this will happen again.  If that doesn't do the job, go to Intel's site and find the latest Matrix Storage Manager or Rapid Storage Technology that is specified for your chipset and operating system.  Or just try the latest and if that doesn't work, try earlier ones.
    https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Software+Products&ProductL...
    Here's a local KB addressing this (presumed) issue:  http://forums.lenovo.com/t5/Windows-7-Knowledge-Base/Windows-Update-Fails-After-Installing-New-Hard-...
    To repeat, this is a bit of a guess.  It's pretty likely that your storage driver is the culprit.  Either you need one new enough to support the physical size reporting ioctl, or you've been bitten by TVSU "updating" to a buggy driver.  Either way the corrrect driver should fix things.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Mac mini 6630m graphic card have problem during running windows 8.1 problem with bootcamp

    Hi All,
         I need a help!
         I am follow the Apple officeal document install windows 8.1 operation sysmtem in my Mac mini with BootCamp , and I have install the bootcamp drivers.
         But I got a problem ,the Graphic Card and the Audio device is not work ,and show video controller error.
         I have install the bootcamp many times ,but it doesn't at all.
         Thanks all.
         mac mini infomation:
              mid 2011, graphic card AMD HD 6630m

    Thank you for your reply!!
    I have try to install the driver for the bootcamp ,but it dosn't work too.
    now ,I have install windows 7 OS by bootcamp.
    Thank you again!!
    Best  wish!! 

  • Problem to install Windows 7 with Bootcamp

    Hi everyone,
    I know there's already quite a few discussion on it but...
    I'm desperate... After few days trying to install Windows 7 I'm asking for some help.
    I checked soooooooo many forum, tried sooooooo many stuffs, install and desinstall sooooooooo many programs and nothing works...
    So I have a Macbook Pro 13" (2009)
      Model Identifier:          MacBookPro5,5
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2,53 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1,07 GHz
      Boot ROM Version:          MBP55.00AC.B03
    When I install bootcamp it works and restarts the computer by itself but I ALWAYS have a problem here.
    First scenario : black screen and white cursor
            Nothing happens; have to switch off the computer; press Alt to choose Mac partition.
       2.  Second scenario : same BUT screen displays "No bootable device, please insert CD and press any key"
            Same
    Have to precise that when Bootcamp create a partition it is empty; no file in it. My co-worker told me that Bootcamp is supposed to create files automatically...
    I'm really desperate, I try all the key words on Google, download a lot of softwares and nothing works!
    Thanks a lot!!!!

    http://www.apple.com/support/bootcamp/
    https://discussions.apple.com/community/windows_software/boot_camp
    When you run Bootcmap Assistant, select the first option to print and read the instructions.

  • Monitor calibratio​n problems after installing windows 8.1

    I have a hp envy m6-1105tx and right after installing windows 8.1 my monitor changed completely.
    When i have a photo open in photoshop tones, colors luminosity, gamma etc are all wrong. Before i never had problems, when i looked at a photo in photoshop and i will see the photo on a different screen it would be basiclally identical but now the photo in photoshop is much different than the actual photo, and this doesn't apply only to photoshop but to everything. I already try to do the calibration through the control panel but it didn't improve the situation, is there a way to get the screen back to the way it was before?
    Thanks

    Wehodancer, welcome to the forum.
    I checked for an updated driver for the video, but there is none for Win 8.1.  Therefore, I suggest installing the original driver for the video to see if it helps.  It may be that it was corrupted during the update process.
    Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • I have problems with installing my Creative Cloud on my new mac.

    Hi! I have problems with my Creative Cloud account, because I've got my old mac computer stolen, and now I want to install my Creative Cloud on my new mac computer, but i can't manage to do it. I already have an account and I still pay every month, but I have no Adobe programs. Help me please! - Emil

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each
    -Both subscriptions MAY be in use at the same time https://forums.adobe.com/thread/1683787
    Remove license on a computer http://forums.adobe.com/thread/1442423?tstart=0 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  • Problem during install window 8, can not select the drive

    During the installation windows 8 on my iMac, I have followed step by step however, when it was reaching to choose the hard drive to install windows and I have formatted the drive as well, but I still not be able to click next to continue. Anyone know what problem here? And how to solve it
    Thanks so much

    Hello Hollegan,
    Thank you for all the information you provided about the Boot Camp installation issue you are experiencing.  If you have followed all the steps in page 6 of the Boot Camp Installation and Setup Guide, then I recommend following the troubleshooting steps from page 7:
    Boot Camp Installation & Setup Guide
    http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for