I have problem with installing the latest version of iTunes
I have this message "Apple Mobile Device" failed to start. What i have to do now?
See Troubleshooting issues with iTunes for Windows updates.
tt2
Similar Messages
-
Problems with downlowding the latest version of iTunes
Resently there have ben problems with downloading the latest versions of iTunes.
And also the version 10.6.1.7 I had to reinstall up to four times, undtil the install
succeeded.
Normally the updates are running without any problems.
I have ben iTunes customer several years, and very satisfied with the program.
Best regards
AageviTry downloading iTunes directly from the Apple website -> http://www.apple.com/itunes/download/
-
I have tried to install the latest version of itunes to my PC on Windows Vista & I keep getting - "Runtime Error!" R6034 & itunes will not open.
I have tried re-installing itunes but it is the same.....any advice?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Can someone help me with installing the latest version of iTunes for Windows 7 64 bit Home Premium?
Latest version of iTunes for Windows 7 64 bit Home Premium downloads just fine. But, fails to install.
"Unblocked and gave all permissions." Still, no go.
I see by reading the other posts on this forum that I am not alone. Any help?
Frustrated!Ok...This was very odd. I left the installation program, in what I considered a frozen state on screen. After about 30 mins, to my surprise, It installed! I'm not computer literate, so, I don't know what to say. But, to just WAIT for it to respond! Good Luck!
-
I am trying to install the latest version of itunes and when the install begins I get the message "There is a problem with this Windows installer package. A program required for this install could not be opened. contact your support personnel or product vendor". I ran a troubleshooting diagnostic on my computer and nothing flagged as a problem. I uninstalled iTunes and tried again and now I don't have any way to sync my ipod touch. Please help with any suggestions!!!
Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.) -
i have installed the LATEST VERSION of itunes in my windows and i bought the new ipad with retina display ,i had moved music into the ipad from my windows through the itunes but I DONT KNOW HOW TO MOVE THE VIDEOS IN MY VIDEOS LIBRARY OF MY COMPUTER TO MY
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have problem when updating the latest version of Pro-X, I tried for several times, so I uninstall and re-install it. It is unsuccessful to re-install the Pro-X and it direct me to ask help from CS,also showing this message: Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW025, DW050 ... WARNING: DW024, DW025 ..., please advice me the step to re-install the Pro-X. Thanks
Please follow Errors "Exit Code: 6," "Exit Code: 7" | CS5, CS5.5
Do let us know if it worked.
Regards
Rajshree -
I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I have 3 Dell laptops at home and I am unable to connect my iPad 1 to any of them using the USB cable. If I connect the iPad to any Apple computer using the same USB cable, it works perfectly. I have installed the latest versions of iTunes and iOS, but still no luck. Apple Store Geniuses helped me determine that it wasn't my iPad causing the problem, but were less helpful when it came to dealing with non-Apple devices.
Options?Does the OS see the iPad at all? In other words does it show up in either the My Computer or Device Manager?
I've had problems in the past where I had to modify the registry to get my son's iPod to sync with a particular HP laptop.
If it doesn't show up at all have your tried using an external hub (with or without power)? -
I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!
Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M. -
When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?
Hello mustangcim243,
iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
If the above does not resolve your issue, I recommend we reset the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
(See Step 4: Remove the SC Info folder)
Thanks,
Matt M. -
After installing the latest version of iTunes, I can no longer export music files converted by EZ Vinyl Conversion software to iTunes, which is the only export option available in the software. I have been converting my vinyl records, tapes and cd's to MP3 files in iTunes for about a year now, and have well over 1000 man-hours invested in this effort. I tried restoring the last version of iTunes, but it will no longer read my library, as, apparently, the new version modified the library file(s) in some way. I want to reenable this export-import function to finish my archival. What is necessary ???
Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.
-
I have just tried to instal the latest version of itunes. It failed and I got a message saying ' An application has made an attempt to load the C runtime library incorrectly' I completely uninstalled itunes and tried to install an earlier version and got the same message. So I can no longer access my itunes files. Help
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
Please could someone help???
And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
Thanks alot! I really appreciate your help..Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I get the following error message after installing the latest version of itunes via auto update: "the itunes Library file cannot be saved. An unknown error occurred (-54). Has anyone ever seen this message and anyone have a suggestion what to do?
Hi pholewinski!
I have a couple of articles for you here that I believe will help you with this issue. The first is an article on advanced troubleshooting, and it can be found here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/ts3297
If following that article's steps doesn't take care of the issue, you can try the things listed in this article, which is about permissions issues in iTunes:
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/TS1277
Thanks for using the Apple Support Communities. Have a good one!
-Braden
Maybe you are looking for
-
Hi, while posting the documents i have received an error stating that document is not created Message no RW609 pls reply
-
VMware Fusion Update, now PC side no longer sees network
I had installed VMware Fusion V 1.1.2 on my MB Pro and had set set up network printing and file sharing. Then a couple of days ago I updated to 1.1.3, and now I can no longer see my work network, and my printer is nolonger there. I can still connect
-
Downloaded current ipod updater? check. but can't get it to work.
(I apologize in advance if this has already been addressed/answered.) I've downloaded the most recent update for ipod, it's installed in my computer but I can't get it to run. It always prompts me to restart my computer, which I do...then nothing. It
-
Does any know where you can get free "good" Adobe After Effects templates?
-
Anyone know how to get an NYCDOE email account on my iphone?
It is a Microsoft Exchange Server. I know there is a way, but I don't know how to do it. Any help is much appreciated.