I have problem with playing stream fullscreen. it goes black but with sound
i have problem with playing stream fullscreen. it goes black but with sound. i have to wait 10-15 minutes then i can press fullscreen. what to do?
s
Thanks!! but i been fixing now for 10 minute ago by restart my macbook pro. My case is it show normal with Intenal-speakers and nothing mark with red light or mult so i tried to restart that it working again
Similar Messages
-
IiPad air2 suddenly freezes, the screen goes black but the sound is still on, I have taken it back to factory settings and it was OK then yesterday it froze again, only plugging it into my IMac got it going again. Anyone else got this problem?
Greetings jupiejupie,
Welcome to the Apple Support Communities!
I understand that your iPad is sporadically becoming unresponsive and the screen is turning black. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Joe -
i have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!
Hi pystyke,
Welcome to Apple Support Communities.
You may find these links helpful with troubleshooting the audio issue you're experiencing:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Best,
Jeremy -
Hi,since my update to OSX Yosemite,I have problems opening DW and AI CS6. A message with update to old Java SE-6 is displayed?Thx
You need to install Java SE 6 to run those programs. There has been quite a bit of discussion here about that. Something at one of these links should get you going...
Prompted to install Java SE 6 Runtime | Mac OS 10.9
Dreamweaver and Java SE 6 Runtime problem on MAC Mountain Lion OSX -
I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says I am not connected to the internet and offers me a choice of nearby networks including mine and then asks for a password when I select it. Why does it do this with our new MacBooks (also with my son's brand new one) and not with the iPhone, iPad and older MacBook? They happily automatically connect to our network after entering the password just the once.
Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/ -
I have a funny app icon that appeared on my screen....it is not an app because I can't don anything with it. It is a black icon with a bait white A in it......does anyone know what it is?
NADNOR wrote:
It is a black icon with a bait white A in it......does anyone know what it is?
What in the world is a "bait white A"? -
With blue u hear my ring tone but with put I can't hear my ring tone
I have no volume when my cell rings only vibrate ,but with blue tooth on in my truck I
Hear my ring tone . Switch is on and volume is up could be that my speaker is blown ?Hi Vac dude,
Thanks for visiting Apple Support Communities.
See this article for some troubleshooting steps you can try:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Cheers,
Jeremy -
my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?
Have you just tried repairing with Disk Utility?
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu. -
I just set up my Apple TV. I'm able to watch netflix's for about 15 minutes then the video goes black but I still have audio.
Is it always at the 15 minute mark?
To make sure it's not a connectivity issue
What is your connection via speedtest.net?
Check istumbler or netstumbler for interference
Make sure DNS is set correctly (settings - general - network - configure DNS - automatic) -
Music stops playing when the screen goes dark; the earbud jack is flush with the iPod. The Jack is hard to push in. what is the problem? How do I Fix it?
And you are positive the white part of the headset is flush with the body of the Nano?
Have you tried another set of headphones to see if the problem persisted? If so, it's likely that the headphone jack needs replacing.
B-rock -
One mov file plays in Windows Media Viewer in Ext Hd Drv. Imported as Proxy Media into FCPX it plays in both Event and Time Line for 5 seconds, then goes black. No problem with many other mov files in same project. Tried converting this one file into MP4, but produced only pixellated jumble.
Can you open the clip in the QuickTime player? What are the specs shown in the inspector?
-
HT1711 Have bought music, but, can't play it, my screen goes black
Have bought music o iTunes, but, it won't play, screen goes black when I click on play.. Help?
I just did this and we are now getting a pop up that says:
Are you sure you want to sync movies? All existing songs, movies and TV shows on the IPOD will be removed and replaced with movies from your ITUNES library.
Im afraid we will lose the music that she already has uploaded on her IPOD even though the option is to sync movies the warning states songs will be lost. -
i have a windows 7 hp elite and am having problems with it freezing and going black, was doing it on the zynga games, not it is with everything. i have cleaned, defraged, and shredded files, etc and have all the updates and even had it restored, but nothing is working. any ideas?
remove power cord, take battery out, hold the start button for 4 min, put battery back and press start lightly and hit f8 immediately severals times. it may start up right away or take several times.
-
Have problems sending mail from a secure wireless connection. but ok from starbucks
I have several clients here at my marina all using different email providers and they all seem to have problems sending out mail from my secure wireless. They can recieve mail no problem. Now here is where it get weird. I added my gmail account to one of the problem iphones and same thing was happening, when i go to send out an email from my account on their phone it gets stuck trying to send mail. I compaired server setting on my phone to his and everything was that same, even turned off his server from fairpoint(the email he uses) and kept my gmail one and still couldnt send mail from his phone but worked fine on mine. Apple set up this individuals iphone/ipad so it make me think they did something when he had the accounts added. Any thoughts?
look here for gmail accounts
http://support.apple.com/kb/TS3058 -
My ipod touch 'blacks out ' when loading apps and then goes straight back out to the screen. I have tried resetting it and also re-downloading the apps but with no success. All software is up to date.
Did you try download/installing a new app?
Then try:
iOS: Troubleshooting applications purchased from the App Store
Maybe you are looking for
-
probably asked and answered a million times but laptop died and my boyfriend and i are now sharing a computer when i went to back up my contacts i ended up with all of his? Is there a way to get them off without deleting each one? Also how do i preve
-
Same Problem: Safari wont open and it Force to quit.
I have the same problem with Safari, just like other users. When I start up my iMac Safari dont open and the rainbow circle appear; it forces to quit. This is the Crash Report: http://rapidshare.com/files/156630612/Safari_Error.rtf.html Please Help.
-
Problem with string constructor when using byte array as parameter
I am creating a string using constructor and passing byte array as parameter.This byte array i am getting from MessageDigest's digest() method,i.e. a hash value. The problem is when i iterate through byte array i can able to print all the values in b
-
To find the location of PL/SQL stored PROCEDURE in database
hi this is the detail i ve taken from Application developer-Concurrent Program Executable Executable NAPESCO_STAFF_LEDGER_DTLS Short Name NPSTALEDDTLS Application Human Resources Execution Method PL/SQL Stored Procedure Execution File name NAPESCO_ST
-
PHP generating XHTML syntax errors?
Can somebody tell me I'm just missing something here? I hope that is the case. I am a long-time Dreamweaver user but have been resisting the version 8 upgrade. I wanted to finally delve into learning to use Dreamweaver's built-in PHP behaviors. So in