I have problem with the home button it is no function after i un plug the from usb any can help, I have problem with the home button it is no function after i un plug the from usb any can help
any one can help problem of home button ... is snice download the ios5 the home button got problem.But when using the USB there is no problem
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom
Similar Messages
-
I SUCCEEDED IN TRANSFERING ALL MY BOOKMARKS TO GOOGLE CHROME. THIS WILL ALLOW ME ACCESS TO WEBSITES WHILE I WAIT FOR A METHOD TO REPAIR MY FIREFOX PROGRAM. IN A PREVIOUS MESSAGE, I EXPLAINED THAT I WAS UNABLE TO ACCESS ANY WEBSITE USING FIREFOX AFTER COMCAST, MY ISP, RECOVERED FROM AN OUTAGE THAT LASTED 5 HOURS. WHENEVER I TRIED TO CONNECT TO A SITE, A POP-UP MESSAGE APPEARED INDICATING: "UNABLE TO INITIALIZE THE APPLICATION'S SECURITY COMPONENT. THE MOST LIKELY CAUSE IS PROBLEMS WITH FILES IN YOUR APPLICATION'S PROFILE DIRECTORY. CHECK THAT THIS DIRECTORY HAS NO READ/WRITE RESTRICTIONS." I EVEN REMOVED FIREFOX FROM MY COMPUTER AND DOWNLOADED IT AGAIN, FIGURING THAT BY NOT MERELY USING AN UPGRADE, I WOULD BE INSTALLING A COMPLETELY FRESH DOWNLOAD. UNFORTUNATELY, I RECEIVED THE SAME DISAPPOINTING RESULT, WITH THE SAME POP-UP MESSAGE RE-APPEARING. HOWEVER USING BOTH GOOGLE CHROME AND INTERNET EXPLORER, I WAS ABLE TO CONNECT TO WEBSITES. SO I HAVE TO CONCLUDE THAT THE PROBLEM IS NOT WITH MY INTERNET CONNECTION.
Press '''START + R''' in keyboard to open the '''Run''' box(or '''start''' then '''run''') , type in the RUN box '''%APPDATA%''' (or copied in just i wrote, bold text) then click '''OK'''. A Windows Explorer window will appear, in this window, choose '''Mozilla''' then '''Firefox''' then '''Profiles'''. Each folder in the "Profiles" folder (e.g., "xxxxxxxx.default") is a profile on your computer (maybe is one file if you have only one profile).
see for more info : [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile folder - Firefox ]
try it, good luck
thanks again -
Hi I have a problem with my iPhone 4S I have no sound from my speaker , keyboard, notifications. or volume controls, I have reset my iphone many times and still the same, any advise will be greatful
ThanksI don't think that a software update from Apple will solve the issues that you are having. You have a rogue installation. After you posted I have just done the following:
Disk Utility can verify my partitioned Volume (including my boot disk) AND REPAIR the non-boot disks on the same Volume without a glitch. It repairs the non-boot disks containing data smoothly.
I have used Mail to send some mails from some Yahoo and Hotmail accounts to my Thunderbird client containing GMail accounts - absolutely normal.
I have iLife '09 but my iMovie '09 and iPhoto '09 open in a jiffy and I see no issues here. I have 6GB RAM (Maximum) on an early 2008 Macbook Pro with a 750GB hard drive partitioned with 120GB reserved for the Boot Drive.
I am sorry that I cannot help further but I am sure there must be a way to reinstall the software without having to revert to restoring your ML backup. I have two clones and if you have such I would attempt to do that through that rather than through Time Machine - that is of course if you have a cloned drive.
Good luck! -
I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.
Hi melvin victor,
Welcome to the Support Communities!
The information below may help you troubleshoot your iPhone battery issue:
iPhone Battery and Power - Apple Support
http://www.apple.com/support/iphone/repair/battery-power/
Battery & power
Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
I hope this information helps ....
- Judy -
Does anyone else have problems with the lightening to USB cables, particularly the longer version, when using the iPad and charging at the same time?
If so, am I doing anything wrong?Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd -
Hi,
My 1stgen iPad keeps. Switching back to the apps. Pages by itself after installing ios5. I have shut it down manually as suggestedby a tech rep but the problem still exists.
Thanks, Jim1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again. -
I'm running FF 4 Beta 8 with the latest Flash player (10.1.102.64). When I play YouTube videos, the video is loaded, starts, and plays okay, but when I move my cursor around within the Firefox window, portions of the window black out under where the cursor travels. FF tabs and buttons will black out, or parts of the YouTube page (but not the video). CTL-ALT-Del to bring up Windows Security Panel, then CANCEL will restore the Firefox window, plus the YouTube page correctly (ie black is gone and window has been redrawn correctly). I can open up new tabs and replicate the problem multiple times. I've also experienced this problem with embedded YouTube videos (though it's easiest to replicate the problem direct from the YouTube page.) I don't experience this problem at all with FF 4 Beta 8 in Safe Mode, nor the latest FF 3.x.x. I have tried uninstalling and re-installing the Flash plug-in. Anyone have any ideas?
Problem involving videos played from the YouTube site is much less noticeable after upgrading from FF 4.0b8 to 4.0b9, but still occurs with embedded YouTube videos, where blacking out of other portions of the window still happens.
-
I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
i recently have been problem with my AppleTV. I select the AirPlay button on my ipad3 and select AppleTV below my iPad selection. The tablet thinks for a little bit, about 5 seconds, and then gives up, deselecting the AppleTV button and refreshing automatically to display on my tablet. My spouse has the same issue at the same time with her ipad air. All software is up to date and re verified wifi. The AppleTV can still stream from its internal apps. Seems like the only problem is AirPlay.
any ideas to fix this problem?Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful. -
I have a 2012 Mini with a fusion drive that won't boot from a usb cloned drive. It came with 10.8.2 pre installed. I have zapped the PRAM and reset the SMC. Any thoughts?
When I tried using a recently downloaded (from the App store) version of MtLion 10.8.2 (12C60) I could NOT get the new MacMini to install or boot from a USB I had previously made. I was however able to use the Recovery Mode of the MacMini to create a bootable SSD which I had installed. The problem arose when I went back into Recovery DU as it saw the seperate drives (SSD & HD) as a broken Fusion Drive. Interestingly DU from the boot volume had NO issues and reported NO faults. It was the Recovery DU that identified the faulty Fusion Drive configuration. At this point I am definately out of my depth but my speculation is that the Recovery Volume is being used in some fashion to form the method or pattern that DU assigns files to the drives, System Report sees the drives as seperate volumes with all their individual characteristics.
Disk Utility did not make a bootable USB, I don't have or use CCC or Super Duper.
Here is the longer version I've been compiling:
Having bought a late 2012 Mac Mini(6,2) i7 2.66GHZ with the standard 1TB 5400 HD and 4GB of RAM (base model) I immediately decided to install a Mercury Elite 6g 240GB SSD and up the RAM to 16GB. I received both shipments on the same day and had all my new toys in front of me. After following the video advice on OWC’s website for the installation of the second drive I started the mini and formatted the SSD to accept the OS from Recovery on the original HD. This MacMini shipped with 10.8.2 (12C2034) as the OS, the normal build of 10.8.2 is (12C60). Having used Recovery Disk Utility to format the SSD it came back with an error that DU could’t Repair. I went ahead and installed the OS on the SSD and the Mini booted normally from both drives. The issue I encountered with this setup was that iMovie encountered an “unexpected error” and would not save a completed project. I therefore decided to figure the drive issue out because I suspect the new Fusion File Management software didn’t like my configuration with drives that Recovery DU saw as needing to be “fixed”. After spending some time on the phone with both OWC and Apple Support I took the plunge and used Internet Recovery Disk Utility and allowed both drives to be “fixed” after which DU created a Fusion Drive (Logical Drive) that I then ran Repair Disk on and it showed up as a single drive in DU. It works perfectly as described by Apple’s site:
http://support.apple.com/kb/HT5446
Having checked the Link Speed and Negotiated Speed they both show as 6g so I’m pleased not to have lost performance due to it being fuzed to a 3g 5400 drive. The biggest drawback is that Apple’s Fusion Management only allows for 1 additional partition and I would have preferred more than that.
I have sourced some additional information here:
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.macsales.com/15619-special-note-for-adding-an-ssd-to-a-2012-mac-mini ?
http://blog.fosketts.net/2011/08/05/undocumented-corestorage-commands/
If anyone has a factory Fusion Drive could you please post the Link and Negotiated Speeds of both drives? This information can be found in Apple > About This Mac > More Info… > System Report > Serial ATA and the drives should show up as discrete drives with their info listed separately. -
A while back I had an upgrade available to me. I had Lion when I bought this Pro. The upgrade is Maverick. After downloading and installing the upgrade, my computer started freezing while doing anything. I might not get this completely written before it freezes. The keyboard is getting hot, and I have to use the power button to turn it off. After it has sat for at least 10 minutes, I can turn it back on. I might be able to do some work for 5 minutes, or up to 30 minutes before it freezes again. Some of my programs are not working, either.
I would appreciate any suggestions anyone might have, or even go back to Lion, if I can figure out how to.
Thanks.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I have an optical mouse that came with my Mac Pro, the only thing plugged into the USB port on the keyboard. After a year of working normally, the trackball all of a sudden stopped scrolling down. It scrolls up just fine, but not down. Any thoughts?
Well
I tried all of the suggestions, sort of. I did not have alcohol wipes, but I did take alcohol and pour some ona white paper towel and then rolled the mouse touch ball aroound and that finally cleared up the problem. Just inverting it on paper did not do the reick, it needed some help with the alcohol. Of course the probelm is the debris that gets inside and it really needs to come out.
This is a huge problem for RIM devices users too. -
Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
Time Machine will not let me restore from backups after June, 2013. I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?
rtilghman wrote:
telling me to buy a new router is NOT a solution.
And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?
Maybe you are looking for
-
How do I access session data through an EJB?
Hi How do I access session data through an EJB? I am currantly developing a Web service (using ejb's, JBoss.net and Apache Axis). A client making a call to this Web service, is expecting a bussiness-object in return. My problem is that this bussiness
-
Keynote and Microsoft Powerpoint crash when opening a downloaded ppt.
Hello, I am having a problem that only is affecting my Macbook Pro. both Microsoft Powerpoint and Keynote crashes when I open a ppt. I download from a work site. Same thing happens when trying to open the same file with Microsoft powerpoint.These sam
-
BPM Workspace 10gR3 Portlet integration in WebCenter 11g
Hi guys, I want to integrate my BPM processes within WebCenters portal. What i want to do is to present my bpm workspace inside portlets that will live in Webcenter. My question is, if there is an out-of-the-box solution in webcenter for doing this o
-
Best practice for external drive?
A really basic set of questions, for which I ought to know the answers: with four external firewire drives connected, three of them daisy-chained to one FW800 port, the fourth to a second FW800 port, do I: a) when shutting down the computer, eject th
-
Username passwords for client 000
Dear All, I don't have credentials of SAP* DDIC in DEV QAS and PRD of client 000. Can you please let me know steps to recover the passwords? Please let me know the steps or ways . don't put external links Regards Nikhil