I have problem with using maps and directions.

Hi,
I'm using iPhone 5, I purchased before 1 year from Qatar. I have a problem with maps and direction here, I have attached error message. Please kindly inform me reason.

The feature(s) you are looking for don't appear to be available in your country.
See:
http://www.apple.com/ios/feature-availability/

Similar Messages

  • I have two Iphones with different email addresses sharing one Apple ID. Will that cause problems with using messaging and FaceTime?

    I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
    I would like to set up a new Apple Id for one of the phones and remove it from the old account.
    If I do that, can I move all of the purchased apps and songs to the new Apple account?
    Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?

    Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address).  While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
    Rather than do all that, don't fight it -- use separate IDs for iCloud.  You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

  • Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number:  *********

    Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number:  *******
    <Edited by Host>

    Hello Khayalh,
    You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively. 
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Regards,
    -Norm G. 

  • I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications.  I haven't ever used time machine to back up (my bad I know).  Is there a way to go back to snow leopard with messing up all my files and my set

    I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications.  I haven't ever used time machine to back up (my bad I know).  Is there a way to go back to snow leopard with messing up all my files and my set?

    Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
    http://www.lacie.com/silverkeeper/
    If it's messing things up you could try asking LaCie Support for assistance.

  • I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else?

    I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else? Thanks, Rose

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    If that does'nt help log into another user account on your Mac and try iPhoto from there. 

  • Hello ! I'm using iphone 5 running ios 7.1.1 I have problem with Appstore error and also Safari don't work too. What can I do to fix this problem ?

    Hello ! I'm using iphone 5 running ios 7.1.1 and I have problem with appstore error and also Safari doesn't work. what can do I fix this problem ? I need help now my iphone can't do nothing

    Need more details. What is your appstore error exactly? and what happens when you try to use Safari?

  • I have problems with google maps at IPhoto. It recognizes the place, but gives not the map.

    I have problems with google maps at IPhoto. It recognizes the place, but gives not the map. It gets grey. You do not even see the world in black and white. What is the problem and what can I do?

    in the iPhoto preferences is look up places set to automatically?
    LN

  • I hve pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days

    I have pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days again... I can't find anything wrong in my account infos. What do I need to check and change? Adobe takes the money directly on my credit card since almost 2 years and I haven't change anything sicne then. The expiration date is good. Also, I'm not able to contact the Adobe support, it's not available.

    ImprimerieModerne, my response of about being unable to find the CC was for Kathy P. The issue that you are facing is being worked upon.
    I am sorry for the confusion.
    Regards
    Rajshree

  • Please help I have problems with songs,podcasts,and just general media play

    hey guys, I'll get straight into it. My problem is that many of the songs and podcasts in my library come up with the little exclamation mark when I havn't changed anything or deleted anything, so I have to find the original files, which occasisionally just dissapear for no apparent reason. Also I have problems with d/l podcasts as sometimes it wont d/l the newest edition etc but comes up with the little '!' mark. I have just upgraded to iTunes 7 and although the problem was occuring before the upgrade just aggravated it, and messed up my library files causing me to revert to an older library.
    Now last and most importantly, my audio has suddenly become choppy since I upgraded. This is similar to the problem I have with the sound in Quicktime only working properly if I keep all other apps and tasks to a bare minimum (even if they take up barely any system resources). This seems strange as my system is not exactly poor performance.
    Thanks in advance guys !

    Hi,
    If you right click a file, and do getinfo on the summary page this will give a file location, is this matching the file location on your hard disk? If not that might explain the exclamation marks?
    Kind Regards
    Rich

  • All of you who use the 80gb ipod classic and have problems with it freezing and syncing with itunes...well I have joined the club. This is a serious issue with apple and they need to correct it. I have tried everything to no avial.

    This is beyond frustrating. I just wasted 70 dollars between a new battery and gas for my ipod 80gb classic. It was having major issues syncing and freezing with itunes. I tried everything possible and noticed that a lot of people have been having the same issues with their ipod classics as well. I must have restored it several times and now it just totally bit the dust. Now I have to shell out 130 dollars to send it in to apple to be rebuilt/fixed. This is nonsense and I just cant believe apple isn't doing anything to address this issue. My ipod was doing great for about nearly 5 years and now  this. I even down-graded to itunes 10.7, but by the time I had it set up to try, that's when my ipod totally failed and will not even come on. Grrrrrrrrrrrrrrr

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • TS1424 Anyone have problems with iTune purchases and functions when overseas?

    I am in Israel, been here for three weeks and had no problems with apps updates, purchases,etc.
    suddenly it says that I cannot coplete transactions because PayPal is declining payments.
    However a quick check with PayPal shows that my account is in order and it should NOT be a problem.
    There is a suggestion that being in another country is related to the problem.
    Is this Possible ?

    I have this exact problem.  Also affects any app that is using map services (like foursquare).  I've had Apple replace the phone (didn't help), had Verizon replace the SIM card (didn't help), and so I am still trying to solve this while Apple and Verizon point at each other and say that the other one is the problem.
    Sorry no solution, but I hope one pops up here on this thread!

  • Problem with context mapping and data flow in a FPM application

    Hi All,
    I am trying to develop an ESS application using FPM. For the same, the requirement is to see the history of an employee in the second view.
    The first view has got just the overview information and the second one has got the detail. So, the records or the fields are the same on both the views.
    As per the FPM guidelines, the Model is residing in the Fc component and the respective Vc components are using the model data accordingly.
    I am executing the model in the Fc component calling the executable method in the interfaceController of the first view and then trying to display the output data of the BAPI in the first view which provides the overview information.This is working fine.
    But when i am trying to map the same output node to the Table UI for the second view, the record size is coming zero and thus no information is available.
    For the above issue, I am again executing the RFC in the InterfaceController of the second view to populate the records, which is incorrect as it is already executed and the data is available for the first view.
    I request you to let me know the correct approach to Context mapping and data flow when using FPM-roadmap. Is their any standard method or approach available to deal with such requirements? Please let me know.
    Thanks in advance.
    Regards
    DK

    Hi Idhaya,
    I model node is available in Fc and the Fc interface controller is being used in the first Vc and the second Vc.
    So the idea is, as the executable method is generated in the Fc, so i have created a custom method to call the executable method in Fc, where the input parameter is getting passed and this custom method is finally getting called is the first Vc.
    So , now my first Vc is ready to call the custom method in Fc and execute the RFC. Once the RFC is executed, the nodes in the Fc should get populated which is the ideal case.
    And as the Fc is used as a component in the second Vc, the same node is available to the UI elements.
    But, when I check the record size for the output node, it is always zero, for the second Vc.
    Regards
    DK

  • Have problems with Only Search and McKeeper

    hello,
    I made a big mistake: I 've downloaded the "MacKeeper".
    When I'm on Safari, I can't start through google, because there is always a mysterious "Only Search" that starts my researches even if I've given "google" as first page in Safari. Despite this, The "MacKeeper" alway opens itself on new pages even if I canceled it.
    Could somebody help me?
    Thenk'you very much
    Alex

    There is no need to download anything to solve this problem.
    You may have installed the "Downlite" or "VSearch" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
    Back up all data before making any changes.
    Malware is always changing to get around the defenses against it. In addition to, or instead of, the files listed in the support article, you may need to remove the following items:
    /Library/Application Support/dot
    /Library/LaunchAgents/com.dot.agent.plist
    /Library/LaunchDaemons/com.dot.daemon.plist
    /Library/LaunchDaemons/com.dot.helper.plist
    /System/Library/Frameworks/v.framework
    One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
    If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This malware is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates
    if it's not already checked.

  • Did I mess up by downloading MacKeeper?  Downloaded last year and today my computer is doing all kind of weird stuff and Mackeeper kept popping up to renew and I did.  Still have problems with my browser and popups!?

    I downloaded MacKeeper last year.  Today my browser is messed up and I am getting popups.  MacKeeper keeps popping up to download, so I updated my subscription-still messed up. Is this malware and if so, why did it show up a year later and after I paid again to update!?

    You installed a variant of the "VSearch" trojan. Remove it as follows.
    This malware has many variants. Anyone else finding this comment should not expect it to be applicable.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.projectx.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.projectx.daemon.plist
    /Library/LaunchDaemons/com.projectx.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/projectx
    /System/Library/Frameworks/v.framework
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
    In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere  should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
    Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
              Install system data files and security updates (OS X 10.10 or later)
    or
              Download updates automatically (OS X 10.9 or earlier)
    if it's not already checked.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • I have problems with j2ee standalone and de crm server

    Hello guys,
    I have installed a crm server and a j2ee standalone,
    the j2ee intance have been intalled sacesfully but when the java application was deployed, it had ocurred the following error.
    WARNING    2009-03-03 11:21:51
               CJSlibModule::writeWarning_impl()
    Found profile of Java instance JC01 in supposed system based on AS-ABAP C18. Setting hasABAP status to undefined.
    TRACE      [iaxxejsexp.cpp:199]
               EJS_Installer::writeTraceToLogBook()
    2009-03-03 11:21:51.808 NW._setHasABAP(undefined)
    TRACE      [iaxxejsexp.cpp:199]
               EJS_Installer::writeTraceToLogBook()
    NWException thrown: nw.hasABAPswitchABAP:
    SAP system C18 is a ABAP or double stack system. Cannot switch this to a Java standalone system.
    TRACE      [iaxxejsexp.cpp:199]
               EJS_Installer::writeTraceToLogBook()
    t_NW_Options.updateRow(, WHERE name='collected'), updating
    ERROR      2009-03-03 11:21:51
               CJSlibModule::writeError_impl()
    CJS-30036  SAP system C18 is a ABAP or double stack system. Cannot switch this to a Java standalone system.
    And now this error show when i want to do something.
    Now I want to uninstall the j2ee but the result is the same.
    Thank you.

    Hi,
    >SAP system C18 is a ABAP or double stack system. Cannot switch this to a Java standalone system
    It seems that your CRM server was installed as a dual stack system.
    Did you change your mind and want now a separate java stack ?
    You have to find how to tell the abap stack to not use its integrated java stack.
    If you find, I will be interested because I intend to do exactly that : separate the abap and java stacks from a CRM 2007 system because this is a mess to manage.
    Regards,
    Olivier

Maybe you are looking for