I HAVE PROBLEMS CONECTING MY MB PRO WITH MY INSIGNIA TV
HI EVERYONE.
I HAVE A MACBOOK PRO THAT JUST BOUTH AND I WANT TO CONECT IT WITH MY INSIGNIA 24 INCHES TV THAT I HAVE.
I ALREADY HAVE THE "Dynex DX-AP160 - Video / audio adapter - DisplayPort / HDMI - mini-DisplayPort (M) - 19 pin HDMI" TO CONECT THEM.
THE PROBLEM IS, WHEN I CONECT THE HDMI CABLE WITH THE LAPTOP.....IT DOESN'T WORK.
THE TV SCREEN SAYS "NO SIGNAL" AND THE LAPTOP SCREEN ONLY GETS BLUE LIKE 2 SECONDS JUST WHEN I CONECT THE CABLE IN IT.
PLEASE, IF SOMEBODY COULD HELP ME, I'LL BE VERY GRATEFUL.
NO, I HAVEN'T TRIED OTHER CABLES... BUT I'VE BEEN READING THAT IS GOOD TO USE THIS CONECTOR: Kanex iAdapt 51 Mini DisplayPort to HDMI with 5.1 Channel Digital Audio, BECAUSE WITH THE OTHER ONE YOU CAN'T GET THE AUDIO.
THE PROBLEM IS THAT I BOUGHT THAT DYNEX BY AMAZON AND I'M NOT SURE THAT THEY GIVE ME MY MONEY BACK.
ANYWAY...THANK YOU FOR YOUR HELP
Similar Messages
-
Hi, I still have problems reinstalling Final Cut Pro even though I followed these steps.
Reason why I have to reinstall is because I have repaired my Macbook Pro hard drive at a Mac Authorized Repair.
Short history of repair and my Final Cut Pro installation:
1. Macbook Pro stopped working, sendt it for repair. Had the Final Cut Pro installed,
2. Desided to try a MiniMac and recovered my backup with Time Machine, got the Final Cut Pro working.
3. Got my Macbook Pro back from repair, did backup on this one as well. But this time only the files not the Applications.
4. Removed the files as mentioned in HT5149. Didn´t find "com.apple.motionapp.plist" to remove though, but the others I found.
5. When I try to install Final Cut Pro from App Store, it downloads the application as planned. But after download it won´t show in the Application folder nor in the downloads folder, nor will it start an installation prosess. If I pause the installation in App Store, I can see the Final Cut Pro icon in my Dock. (But, as mentioned, after installation it won´t show neither here or in the Applications folder).
Any suggestions on what I should try now?
Thanks for any reply, I´m in deep water here...Sounds like there is a file you're not getting. Never do a removal manually. It's so time consuming and a pain. There's a very easy and fast way to do this, safely, properly.
Get the free "Final Cut Remover" app from Digital Rebellion (dot com), use this to remove FCP X.
Reboot the Mac.
Download from scratch.
If you're not seeing FCP X in your app folder, run Disk Utility to Repair all drives.
If that doesn't help, try running Disk Warrior from Altsoft to repair the directories on all drives. -
dears, i have purchased a new macbook pro with lion os, then after a while for a notification to update the iPhoto app, and when i tried to update it said that unable to update, then i uninstalled it, then i tried to install it but it said these apps connot be installed on this computer!!!!!
what should i do
this problem started to annoy me, as am not able to edit any photo.
pls help ASAPThanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help -
I have problem running final cut pro X because NVIDIA GeForce 7300 GT graphics card I live in a remote area what are my options to fix this
This is the list of Apple approved graphics, except for the cards for laptops. Replace your card with one of these. Get the best you can afford.
NVIDIA
GeForce GT 120
GeForce GT 130
GeForce GTX 285
GeForce 8800 GT
GeForce 8800 GS
Quadro FX 4800
Quadro FX5600
ATI
Radeon HD 4670
Radeon HD 4850
Radeon HD 4870
Radeon HD 5670
Radeon HD 5750
Radeon HD 5770
Radeon HD 5870 -
I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?
The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM -
I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.
Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.
-
I have a 2006 15" Macbook Pro with a broken Superdrive and my external USB one just quit working
Why can my LG Portable Super Multi Drive (GP08NU6B) burn discs, but not read them? Right after I burn a DVD successfully, I stick it back in the drive and it says "The disk you have inserted is not readable by this computer" I have a 2006 15" Macbook Pro with a broken Superdrive, and this external disk drive is the only optical drive that worked via USB. This external drive was bought in 2010 and worked fine up until a month ago. This is supposed to be a Plug and Play device, and LG assures me the drivers are already included in Mac OSX, yet it seems somehow my Macbook lost the drivers and it won't let me watch DVDs now or recognize any discs at all!
How can I find and somehow reinstall the firmware for this optical drive?Sounds more like a hardware issue to me.
-
I have a mid 2010 macbook pro with 4GB memory and need to purchase an additional 4 GB to. Do I need to purchase 8GB of memory to upgrade or can a 4GB upgrade be placed next to the existing memory?
You need to purchase 8 GBs as two 4 GB modules. Must meet these requirments:
Maximum Memory
8.0 GB
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM -
I have the new 2011 macbook pro, with lion preinstalled. I want to change the harddrive. I have backed up everything on time machine. when i put my new blank hard drive in will the lion screen startup.How do i get the lion dmg when i am already using lion
NicholasLiban -
When you use the Lion restore as described, it does a fresh install on the hard drive that you can select at the beginning of the process. This provides a complete install of the very latest version of Lion, including the recovery partition. The drive that you choose for the installation destination winds up like what you would have on a brand new computer from Apple.
- Randy -
Hey. I have problems to send e-mail with Mail. The problems is I need to un active ssl ,... but when I do this,... automatically,. its active again????. Whta can i do
Try posting this in the 10.7 Mail forum. You'll get more help there.
DALE -
Dear all, I have just bought a MacBook pro with osx lion on 25th last month. I wanted to know if I can use the methods described above to update to osx mountain lion or I have to buy osx mountain lion from the app store?
Here are the rules to qualify for the free upgrade:
http://www.apple.com/osx/uptodate/
(has to be purchased from Apple or authorized reseller). -
I have a new Retina MacBook Pro with no IDVD.
I have a new Retina MacBook Pro with no IDVD. Can I purchase and download software to burn iMovies to a DVD or does new Mac not allow this either?
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673 -
Problem Installing Acrobat X pro. I own Creative Suite 5.5, I install all but I have problem to installAcrobat X pro.
I tried all the soulutions you proposed but nothing work.
Now I have installed it as a trial and it works. it asks for a SN, i insert my own onw SN but it does nor WORK. !!!!!!!
CAN YOU HELP ME???Hello ,
To install Acrobat X Pro from CS6 suite, please follow these steps,
1. If you have installation Disk, browse the files from the disk an navigate to "payloads\AcrobatProfessional10.0-EFG"
( if you have downloaded CS6 suite, please navigate to "payloads\AcrobatProfessional10.0-EFG" from the extracted files. )
2. Run AcroPro installer and install Acrobat as a trial.
3. Once you install Acrobat, before launching it, follow the steps from the below document link.
http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days. html
Regards,
Yuvraj. -
I have a new Mac Book Pro with Retina, and Keynote crash almoset every time i use it?
I have a new Mac Book Pro with Retina, and Keynote crashes almoset every time i use it? I have the newest update.
Could you please help me? I have a lot of Keynote shows, and I have to use it now!!
I have saved a crash report, if you need it.Apple will not write back to you. Telephone using the Apple Care phone number appropriate for your country and ask for a refund, if that is what you want to do.
I use Keynote everday, it does exactly what it says it will do, that is if your NOT using Mountain LIon.
There are many applications available
I have used MS PowerPoint professionally for many years on both Windows and Mac, I can assure you it can do everything that Keynote can do and very much more.
Which software you choose depends on who you are and who you are presenting to.
for interactive presentations look at:
PowerPoint
Adobe Flash
Adobe Director
Camtasia
Dreamweaver (an HTML application)
for simple photo slide shows:
iPhoto
iMovie
Picasa
Photomagico
Adobe Lightroom -
On shops in europe (Berlin, Amsterdam) Do you always have in stok a macbook pro with an only English keyborad?
Thanks.This is not Apple. This is a user forum. We are all users like yourself. Check the stores in those cities for your answer.
Maybe you are looking for
-
Unable to adjust backlight in target display mode
Hi. I am using my 27" iMac as a display on my windows computer and i can nolonger change the display brightness with F1/F2 on the imac keyboard. After a bit of reading ive discovered that its a fault introduced in 10.6.8 that seems to not be addresse
-
Unable to save a 'smallest size file' pdf from illustrator 5.5
We recently insalled Adobe Standard 5.5 I often save PDF files from Illustrator using the built in PDF options available from the PDF drop down menu bar when saving files. Usually I will save a visual as a 'smallest file size' or make use of the 'hig
-
Java 6 update 19 will not uninstall
I am trying to revert to update 17 because of the various errors I receive with update 19, as indicated in other topics. In the control panel, update does not uninstall for some reason. Any suggestions so that I can reinstall update 17. I am on Win 7
-
Hello! I'm having serious trouble using the Report Generation Toolkit. LabVIEW 8.6, RGT 1.1.3, Word/Excel 2007. The starting premise is that we are taking data, sending it to a waveform graph, then we want to write the picture to a file (either Word
-
How do i know that whether a screen guard is put over my screen or not?
Plz help me!!