I HAVE PROBLEMS WITH LION 10.7.1 AND THE PRINTER EPSON STYLUS TX515FN, DOES SOMEBODY KNOW IF IT IS POSSIBLE TO BE USED?

I HAVE PROBLEMS WITH LION 10.7.1 AND THE PRINTER EPSON STYLUS TX515FN, DOES SOMEBODY KNOW IF IT IS POSSIBLE TO BE USED?

Yes it is, you must install the driver. Download the driver from here here:
http://www.latin.epson.com/v4/asp/soporteDrivers.asp?idProducto=C11CA49212

Similar Messages

  • Since upgrading my Macbook pro with Yosemite, I have problem with my Xerox Work Centre 3045 - the printer works normally but it does not recognise the scanner, can you help with this?

    Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?

    Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time.  Then restart the MacBook Pro.  If it still will not scan, try using Image Capture from Finder > Applications and see if that will work.  If not, contact Xerox about updated drivers.

  • I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    Ask your question in an iPAD forum.
    This is the OS X Mountain Lion forum.

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

  • HT4009 Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I wan

    Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?

    Contact iTunes Store Support.

  • I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

    I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

    http://www.apple.com/support/itunes/contact/

  • I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    I have problem with Itunes losing where podcasts and some purchased music is located. Don't know how Itunes losing the locations of the files and I can't find the files on my hard drive. What can I do to stop Itunes losing location and restore my files?

    Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

  • Does anyone have problems with iTunes movie rentals freezing in the middle of the movie?

    Does anyone have problems with iTunes movie rentals freezing in the middle of the movie, requiring a force quit, which causes your rental to disappear? This has happened multiple times to me recently. Last time Apple didn't refund my money after reporting the problem. I have been using iTunes for many years but am about to give up.

    Correction: I was refunded for the previous movie freeze.

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough

    I have upgraded to latest IOS 7 software and the vibration on silent mode does not last long enough

    I think you're using a Lion developer version. Open  > About this Mac > More Info, and copy Software here. Did you purchase Lion in the App Store?

  • I have prop with lion 10.5.8 and want to update to latest OS can I do that online or do I have to buy at a store?

    I have a 2008 pro with Lion 10.5.8 and want to update OS to latest version available. Can I download of internet or do I have to purchase OS disk?
    Thanks

    You need to purchase Mac OS X 10.6 on DVD(Apple will send it to you for free if you're a paid member of MobileMe) or Mac OS X 10.7 on the USB thumbdrive.
    (66260)

  • TS3694 i have problem with my iphone 3g. after restoring, theres an error occured in 1015,somebody help me what to do?

    hi
    i have problem with my iphone 3g, after the recovery in itnes, theres an erroroccuredin 1015, what will i do next to resolve this problem?

    Google "Error 1015". You will find your solution.

  • Printing problem with Photoshop CS 6 extended and HP printer

    Hi all, long time browser, first time poster.
    This is a weird issue, it should be noted from the first that I only have weird computer issues. I work at a technical High School where we have the whole Adobe CS6 Extended suite installed. We are running it under a fully patched version of Windows 7 and all the CS6 updates have been applied on 25 machines that all have the same issue. The problem is that when the students go to print to our HP Color Laser jet CP6015DN, the job can been seen loading into the queue, it races up to about 45MB, then sort of strolls to load the rest of the document, usually about 59 to 75 MB's in size. Then I watch the message go to processing, the front panel of the printer says processing, then the print job disappears from the printer queue and the printer and there is no print out. I printed out the usage job log and it shows none of the failed attempts to print and I check the event log page which does not show the errors either.
    Looks like a bad printer driver, right? So I download the new HP Universal printer driver, I normally do not do the Universal driver route as so many of my older printers have problems with it, but the CP6015DN seems to have trouble accessing the extended tray 5 with the specific drivers, but I have the same printing issue with the new Universal driver and the PS driver. So I wander through the HP manual and it suggests using profiles to print to the printer and move the color handling from Printer Manages Colors to Photoshop manages colors and I track down the ICC profiles for the printer on the HP site as the link in the book is dead, so try the CP6015srgb_d50.icc, CP6015_cmyk_d50.icc and CP6015.icc, I try all of these profiles with the newest PS printer driver and the same error, goes to the printer and into the bit bucket. Still no printout or error message.
    Strange thing is that if I do a test print, it prints fine, if I open a tif file in Photoshop, it prints fine, now the teacher says if they print to the Xeorx 7760 in the next room, it also prints out fine. It should be noted that we had so many issues with configuring the Xerox and adjusting controls it was the reason we purchased a HP proofing printer in the first place. But the next door lab is all Apple, which doesn't seem to have this issue. So I open the test document and save it as a PDF file instead the native Photoshop format, and it prints fine, which from what I've been reading on the internet may be the preferred way of printing proofs, I don't know, I've never really used Photoshop, but the teacher says this isn't an acceptable fix and the students should be expected to manage a number of revisions saved to PDF format, me I just go up a number at the end of the file name for every correction when editing documents.
    Any suggestions you have would be appreciated.
    Windows 7 X64
    Photoshop version 13.0.1 x64
    HP Color Laserjet CP6015 DN model number Q3932A
    Dell Optiplex 980 i5-650,  3.2Ghz, 8 GB RAM.

    Yes, Photoshop is up to date at Version 13.0.6.  I have even gone so far as to uninstall CS 6 and put CS 5 back on and still the same thing.  This is really frustrating, the people at Canon try to be helpful but wind up saying it's an Adobe problem and of course you can't talk to real people anymore about CS 6.  My research on the Internet has turned up nothing so I'm stuck.

  • Hi, I have problem with starting up my macbook pro, the gray screen coming and the circle still turning

    hi
    Could u please help me with the problem that I have with starting up my macbook pro?

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I know why I have been having problems with FF 3.6.16 and the last thunderbird update

    I am in Canada and for some reason downloads for both 3.6.12 FF and the last Thunderbird update was the BritishVersions thats why I have UK search engines, not the US versions maybe that is why I am have trouble with my email and addons. The other 2 computers in my house is the US versions.
    But there is still something a bit screwey with 3.6.12 some of the addons are not working properly on the other puters. Can you please change the sofware to the US version please????? Thank you
    I have deleted the software twice already. before realizing I was downloading the british version.....same problem with my Thunderbird can't connect to isp even though everything is done correctly!!!!! Help!!!!!

    You probably can do that.<br />
    If you keep the wrong language then remove the offending language pack from the chrome folder in the Firefox program folder.
    You may need to (re)set the pref "general.useragent.locale" to the preferred language ("en-US") on the about:config page.<br />
    You can open the about:config page via the location bar, like you open a web site.<br />
    Use the Filter bar at the top of that page to quickly locate the pref.

Maybe you are looking for

  • I just bought a new iMac and I'm trying to buy apps for it  but I can't connect my iTunes account to how do I do that

    I just bought a new iMac I'm trying to download apps but I can't connect it to my iTunes account so I can buy them how do I do that

  • Syncing ipad 1

    I want to download the new itunes version to my PC so i can sync my ipad but friends have said that they lost their apps after doing so. Can i get the apps back that i paid for?

  • Different Weblogic Console 8.1 problem

    I have a WebLogic 8.1 server that has 4 domains installed on it. One of my domains started acting freaky...I could still get database connections, but anything I tried to do with them failed. It was not code related because the same codebase is runni

  • Ad Blocking via CSS

    It doesn't seem that Safari 3 works when you go into Edit>Preferences>Advanced and then load up a custom CSS file to block the banner ads, et cetera on certain websites. Is this a universal problem, or is it just me?

  • Probleme de lecture avec itunes

    Bonsoi r alors cela fait deux jours que je n arrive plus a lire les musiques sur itunes ni meme les videos. J ai tester si cela été un probleme de son venant des hauts parleur mais non, youtube fonctionne parfaitement et puis lorsque je met lecture s