I have PSE9 and a Nikon d5100 Camera. Can't get PSE to accept 5100 raw files.

I have set up to use iphoto to store my psotos and externally edit my files in PSE. Works fine with jpeg files but raw files will not transfer. Get message that PSE will not accept. I think that PSE9 will accept wit an upgrade Camera Raw Plug in 6.4. Mine is currently 6.1. I finally got 6.4 downloaded and then the installer refused to install saying I need a serial number for something called Adbe flash Pro CS4 which I don't have ..Adobe people say they no longer give on line support for the PSE -9. Did not enjoy hearing that!!! Help. Sally'Bob

Your on a mac os?
Actually in pse 9 you should be able to go to Help>Updates from within the photoshop elements 9 editor to install the latest camera raw 6.5 plugin for pse 9
Here's the mac version of 6.5 if your help>updates doesn't work:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5263

Similar Messages

  • I have iphoto '08 version with an imac osx 10.5.8. It will not read my RAW files  from my Nikon D800 - a very new model.How can I get it to read my RAW files?

    my somewhat old imac osx 10.5.8 with iphoto '08 will not read my RAW files from my new Nikon D800 camera - a new model on the market( 5 months or so). How can I get iphoto to read my RAW  files?

    iPhoto 08 would not read RAW files from that new a camera. You need to upgrade so you can get more up-to-date version of OS X and iPhoto. Another possiblity is see if iPhoto 11 will run on 10.5.8, if so you should update. You can also attempt to run Software Update and see if it finds a newer release of iPhoto 08 that supports newer RAW formats.

  • I have CS6 10.0.6 x64 extended on  Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?

    I have CS6 10.0.6 x64 extended on  Mac 10.6.8 and Canon 5D mark 111. I can not get CS6 to read my raw files. No new updates available. Any ideas guys?

    If you go to Photoshop>About Plug-in and click on the words Camera Raw, what version does it list?
    I suspect you still have Camera Raw 7.0
    When you go to Help>Updates from within photoshop cs6, it says nothing available?

  • How can I get Elements 12 to load raw files from my Nikon D5300. I have installed DNG Conv. 8.7.1

    I cannot get Elements 12 to recognise and load NEF files from my Nikon D5300. I have downloaded and installed the latest DNG coverter software 8.7.1 but Elements still refuses to load any NEF files.
    regards Ian.

    Hi,
    You shouldn't need to use the DNG converter unless you are using the MAC app version. The D5300 should be supported by Camera Raw 8.3 which should be compatible with Photoshop Elements 12.
    In the editor go to Help -> About Plug-in -> Camera Raw to see which version you have loaded. The latest for Photoshop Elements 12 is 8.5. If you have an older one then go to the Help menu and select Updates.
    If you are up to date, then you may have use old Nikon software to access the NEF files and that is known to corrupt them so that Photoshop Elements can't read them.
    Brian

  • I recently purchased a camera that creates RAW files not currently acceptable to my PS CS5I downloaded Adobe Camera RAW 6.7 but can't get it to process my RAW files.

    I am on a Mac running OS 10.9.5.  I run Photoshop CS5 12.1 x64. When I tried to download AdobeCamerRaw -6.7 I got a message the AdobePatchinstaller couldn't be opened because the identity of the developer cannot be confirmed.  I then changed the settings in my system preferences to permit the opening of the AdobePatchinstaller.  I then closed bridge and phootshop, restarted them, but no luck.  When I view my images in Bridge I see the thumbnails of my jpg images, but instead of thumbnails of the RAW images I just get a a thumbnail that says RAW and a picture of a jewelers loop over a couple of snapshots. I used Grab to capture that logo-like thumbnail, but can't get it into this page.

    What brand and model of camera do you have?

  • How can I get Elements 13 to read RAW files from Nikon D750?

    I've upgrade my camera from the Nikon D3200 to the Nikon D750. With the D3200, I used Elements 11 to edit both JPEG and RAW files, but found out today Elements 11 isn't compatible with the D750 to read RAW files. I downloaded the trial version of Elements 13--which is compatible per the Adobe help desk, but the RAW files shot with the D750 still aren't being seen; however, I do see RAW files that I took with the D3200.
    Same memory card is being used and I formatted the card when I changed it from one camera to the other.
    What am I doing wrong? I almost always shoot RAW, so I need to be able to the files.
    I'm wondering if Elements 13 really is compatible with the D750.
    I want to add I'm using a MAC.
    Thank you!
    Shannon

    I was able to figure out the issue--the D750 files must be converted to DNG files first, then I can upload them to Elements and edit them as I would a RAW file.
    If anyone else is having this issue, I found the video helpful: Learning | LR/PS - The Advantages of the DNG File Format | Photoshop.com.
    You can find the free DNG converter here: Photoshop Help | Digital Negative (DNG)
    This works for both MAC and Windows.

  • How can I get PSE 10 to import RAW photos from my Fuji x-m1 camera?

    I have Fuji X-M1. PSE 10 will not import RAW files from it. Is there an update or file that I can download so that it will do this

    The Fuji X-M1 requires Camera Raw 8.2 or later which is only compatible with Elements 12 or later
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    Camera Raw 8.2 is not compatible with Elements 10 so you cannot open Raw files from that camera with Elements 10.
    You can either upgrade to Elements 12 or download the free Adobe DNG Converter, convert all Fuji X-M1 Raw files to DNGs then edit the DNGs in Elements 10.
    Photoshop Help | Digital Negative (DNG)

  • Since downloading Firefox, my photo's have disappeared and replaced by numbers - How can I get the pictures back

    I was having trouble with downloads on Ebay using Internet Explorer. They recommended Firefox. And it worked better. However, under My Pictures, the actual pictures disappeared and were replaced with the numbers only. I makes it difficult to remember which picture is which when you wish to download 50 or more items. I would like to have the actual pictures back rather than just the numbers. In fact, I do not have the pictures appearing that I use for Ebay. Thank you.

    If images are missing then check that you aren't blocking images from some domains.
    *Press the F10 key or tap the Alt key to bring up the hidden "Menu Bar" temporarily.
    *Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
    *Check "Tools > Page Info > Media" for blocked images
    *Select the first image link and use the cursor Down key to scroll through the list.
    *If an image in the list is grayed and "<i>Block Images from...</i>" has a check-mark then remove this check-mark to unblock images from this domain.
    Make sure that you do not block (third-party) images, the permissions.default.image pref on the <b>about:config</b> page should be 1.
    Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
    Make sure that you allow pages to choose their own colors.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    Note that these settings affect background images.
    See also:
    *http://kb.mozillazine.org/Website_colors_are_wrong
    There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *http://kb.mozillazine.org/Websites_look_wrong

  • Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?

    I have Photoshop Elements 9 and use a Nikon D5100.  I have downloaded camera raw 6.5 but cannot download photos to it.  Does camera raw start automatically or do I have to manual start it?

    That did I, thanks.
    99jon <[email protected]> wrote:
    99jon  created the discussion
    "Which version of camera raw will work with elements 9 and a Nikon D5100? How do I download photos to it?"
    To view the discussion, visit: https://forums.adobe.com/message/7178756#7178756
    >

  • I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

    I have a Nikon d610 and am using PS CS6. I am unable to download my raw files through Bridge on my mac. I have downloaded the most recent Camera Raw files - 8.7.1 - what should I do next.

    The D610 needs ACR 8.3 so you are easily covered there.  I am not entirely clear on the process you are using the bring the files onto your hard drive.  The safest way is to simply bring all the NEF files into a folder on your hard drive, then find them with bridge and open from there.
    If still stuck, open Photoshop, and go Help > About plugins > Camera RAW and check that 8.7 installed OK.

  • I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed

    I redownloaded my Photoshop CS5 and Camera Raw will not accept my RAW files nor will the Adobe Bridge display the picture view of these files. A message displays saying it doesn't support this camera.  I have a Nikon 5100 DSLR Camera.  It always displayed them in the past.  How can I get it to display these photos in Bridge and open them in RAW?

    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7 Update
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7 Update
    Benjamin

  • I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

    I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?

    Familiarize yourself with these tables
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Camera Raw-compatible Adobe applications
    The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
    Some options:
    Upgrade to CS6
    Join the Cloud
    Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
    Camera raw, DNG | Adobe Photoshop CC

  • I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling. I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get the

    I'm looking for some help connecting linksys IP Cameras to my home network to monitor my property when I'm travelling.  I used to do this with linksys WAPS, but since I've discarded all my old linksys networking and standardized on airport, I can't get these things working.  I know that I have to identify my camera through the DHCP table and set up port forwarding and there is the problem. 
    My network consists of 4  base stations set up in a roaming network - same network name and passwords.  I need to do it this way so I don't have to switch network when I move from one side of the house to the other, go to the cabana, or my shop in the barn.  The network works pretty well since I went to a roaming set up.  Good performance, yata, yata, yata.
    However, the roaming network requires the AEBS's to be set up in bridge mode, rather than sharing an ip address.  When the AEBS is set to  bridge mode, you don't see a DCHP table or have the ability to identify your IP Cam through the AEBS - and hence, no port forwarding. 
    I am able to identify and set up my Linksys IP Cam by locating the ip address on my FIOS router, even though, it's plugged into an AEBS.  I set it up, see the video, remove the ethernet cable from the IP Cam, restart - and I can't get to it from an AEBS.  In researching this, it appears, I should be setting up the AEBS to "share an IP Address", going to the DHCP table and identifying the camera's IP address and setting up port forwarding.  However, you don't see any of the DHCP or port forwarding options in Airport Network Utility when configuring in bridge mode. 
    I'm hoping I'm missing something here and that the solution isn't to set it up at the FIOS router level, but I'm beginning to think that's my only hope.  What concerns me there is that I should be able to see the IP cam on the network without port forwarding since I'm not coming from outside, and I can't even do this unless it's connected hard wire.
    I'd appreciate any insight into this that anyone might have.  I've hit the wall with what I know.
    Thanks.

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • I purchased the iPhone 4S  32 GB and my headphones and car jack will NOT play in the left speaker of either.  Have had the iPhone since late February , can't get ANY help........

    I have the iPhone 4S 32 GB and the headphones that came with it will NOT play in left ear.  It will also NOT play in my car left speaker when using the auxiliary connection in my car..............  Have only had since February 26, 2012, can't get HELP anywhere , disappointed

    Where have you tried to get help?
    basics from the manual are restart, reset, restore.
    If that fails, then make an appointment at the genius bar.

  • I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    I have a new MAC MINI and I want to install a second monitor.  I have one connected to the HDMI and it works.  I can't get a signal to the other one.  It is connected from the thunderbolt to its HDMI port.  How can I make it work?

    Could be a bad cable or bad Thunderbolt port.
    You have 90 days of free telephone support on a new device. You can call them at 1-800-MY-APPLE. Have your Mini's serial number handy
    You can also make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

Maybe you are looking for