I have published my Ni logic through the internet ..

I have published my Ni logic through the internet ..AS far I know that any device whithin the same connection area can access my logic But that when using any windows system(Xp or either winows7) ....How about trying to access the logic from my mobile??? ..for example i have an androide system mobile !!! I noticed that I can access the page but without having the control panel of the labview !!
What shall I do ..Does the androide system needs such as an Engine to be able to activate that front panel ..Or What !
waiting yr quik response..
thanx

Hi Eman sa3d;
I am not quite sure what you are asking. When you say “publish my NI logic,” what do you mean by that? Are you creating a web service and trying to control it via your phone’s web browser? We have the Data Dashboard app for Android that might be what you want.
Also, here are some links that might prove useful:
1) Building Android Applications for Simple Data Monitoring.
2) Data Dashboard for LabVIEW (iPhone, iPad, and Android App).
Bill E. | Applications Engineer | National Instruments

Similar Messages

TS3276 I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights.

I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

I cannot send mail. I have logged into my SP through the internet and have no problem I have tried to rebuild the inbox and it just flashes very fast - to fast to view the activity. The mail doctor shows all green lights. This started after I disabled ICloud. I had to disable ICloud as I was not receiving all my mail.

Have a classic 5th gen. have restored, relaoded itunes, gone through the troubleshooting tips and I still can't sync my latest 3 albums to my ipod. It will sync all but those. Also, when go through ipod trblshoot and select check, says can't see it sync.

Have a classic 5th gen. have restored, relaoded itunes, gone through the troubleshooting tips and I still can't sync my latest 3 albums to my ipod. It will sync all but those. Also, when go through ipod trblshoot and select check for sync, says can't see my ipod. pls help

Thanks for the reply. The Itunes trouble shooting in Itunes help. I don't get an error message, it just states can't see ipod like if it wasn't plugged in. I do get an error message on a few of the songs when sync that say error 50, and state that they can't be loaded to ipod. The weird thing is that I can load all of my libary except the latest 3 albums. They are in my libary but they won't load. I'm not sure but it seems like it started when the cloud came about from amazon which is where I buy most of my music.

Music I have downloaded from itunes some of them have cut off half way through the song how do I restore them, I have even tried to sync them again

Music I have downloaded through iTunes, some of the songs have cut off half way through the song, I have even tried to sync them again but have not been able to restore it, how do I restore the music lost?

- Are you saying that they are not listed in your Purchased section?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- Are they listed in your Puchases history when you log into your account on your computer?
- Are they still available now for purchase? If not then you are out of luck
If they are still available and listed in your Puchase History then contact iTunes
http://www.apple.com/support/itunes/

My itouch is gone, 2g, so no locator. Can it be tracked by checking to see if apps or music have been downloaded on it through the apple store or itunes?

My itouch is gone. 2g, so no locator. Can it be tracked by checking to see if apps or music have been downloaded on it through the apple store or itunes? Does Apple know what specific device is downloading an app, etc. or by IP address?

Apple will not help you track/find your Pod or report anything special to you. If you get an email saying that something was purchased with your iTunes account then that indicates someone is using your account. You should report it to the police and change the passwords for all accounts used on the iPod.

How to connect to an other computer through the internet

Please who can help me with Desktop Remote control and connecting through the internet. I know a lot is written about it, but it is still confusing.
So try to explain my situation:
I have an MacBook pro with Desktop Remote Control 3
The other computer:
Apple PowerBook which is connected through and Thomson Speedtouch (wireless 716)
External IP address xx.xx.xx.xx
Internal IP address 192.168.1.66
No firewalls
My questions:
How do I check if my Thomson Speedtouch the ports 5900 and 32?? are open?
How can I open the ports on the router? Do I have to open the port on the router?
Then on the MacBook Pro, I start up ARD3
How do I scan for the computer on Internet? Do I use the external IP address?
How can I then connect to the Apple PowerBook? I cannot fill in the second internal IP address or do I?
I hope someone can help me.
If more info is needed, please ask me.
Thank you....
Hans

Neil thank you for your answer.
I opened Network Utility. Went to the last Tab "Port Scan"
I typed in: external IP address (i got this through the Widget SysStat which shows external IP)
Than I gave up scan between the ports 5890 - 5910 to check if those ports are open or not. I had to way for a moment, and then the result was: "Port Scan has completed....."
Ok, what do I know know? The ports are open or not?
So please can someone help me with the following:
1) What should the result show me from Network utility?
2) Opening the port, this has to be done on the Router or is it something the Internet Service Provider needs to do?
3) I still have the question: how can I open the port, so with what application.
4) What are the exact ports which needs to be open?
5) About bridging in the router, does that have a special name. I didn't see in the router configuration program an option like that? When searching --> this is configured: A. Router-modem (NAT/PAT) - is there something special with NAT/PAT?
Hope someone can help me with a few of my questions.
Thanks

Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
iv unistalled flash, iv checked plug ins it just wont work,

It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
(If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
* Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.
You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
Use the FULL installer for 12.0.0.44: Flash Player 12 (Mac OS X)
And the instructons are here: Snow Leopard Clean Install.pdf
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

Why can't I open/see PDF files that are embedded in an email or sent through the internet?

I can read/see PDF files that are attached to an email, but I can't see/read them if they are embedded in an email or sent through the internet.

I have a similar problem. I can open, read, and save PDF files, but I can't view my online bank statement on my Mac. The statement opens automatically if I use a PC, but on my Mac the page says I need Adobe Reader to view my statement. I already have the latest version of Adobe Reader. The problem seems to be that that the plugin only goes to the Libray. It doesn't get installed into Safari or into FireFox either.

Accessing my home network through the internet?

Is it possible to access my home network through the internet via my AirPort Express? I would like to have full access to my Mac Mini's hard drive from my MacBook while at work.

Yes. You will need to enable file sharing on your Mac Mini (via Sharing in System Preferences) and then you will need to port forward all your ports (since I don't know exactly what file sharing method you will be using) of your Mac Mini via the AirPort Utility.

Streaming advertisements to TV-screens through the internett

Hi,
I am currently opening up a shop. In this shop we have 6 different TV-screens, which will run all of our advertisements and offers.
These 6 screens is split up in the following way: 2 in front, 4 on top.
The two first are going to show the same images/advertisements, so will the top 4.
My question is if Adobe has any programs can run and distribute/stream these images to the TV-screens through the internet? Does Adobe Primetime work this way for instance? And why is it not included in Creative Cloud?
In advance, Thanks!

This has nothing to do with Adobe. You need a suitable video splitter hardware.
Mylenium

Can i connect to the database through the internet

hi all
i installed a database oracle 8i enterprise edition on a pc that exists in a town far from me . i wonder can i connect to this database through the internet from my house
please i need a answer
thanks in advance

You can connect from an Oracle client to any Oracle database in the world that meets certain requirements.
First you need an open network connection between the two points so either no firewall exists between the two stations or the firewall(s) have been configured to allow Oranet traffic. This means both databases must have access to the Internet and certain ports are open.
Second you will need the IP address and port for the remote listener, which in turn must be up and running on the target server.
Then you must have the Service Name or SID and a valid username/password combination for the target database. Plus the username must have create session privilege.
That should be about it.
HTH -- Mark D Powell --

Windows XP activation through the internet

Hello,
I haven't used my Windows in quite a bit. I forgot whether I have or have not installed the drivers. I'd reckon I have... most probably. Either way, there's no way I could check it after the 30 day grace period is over... and I can't get into my Windows XP at all.
So, I'm trying to activate it through the internet... but I can't. I thought the problem might be because I'm counting on a protected wireless connection... so I tried using cable, but my Windows also still says that there's no internet connection detected.
Are these the only two workarounds to this problem:
1. Call up Microsoft so I could activate my Windows.
2. Reinstall Windows.
Is there no way I can get internet detection at all, at this juncture?
Thank you.

Mulia:
I believe that you may not have installed the drivers. Did the internet ever work with your windows installation? If yes then you installed the drivers. If you never checked or it never worked then you may not have installed them.
Regardless of that, if you have an authentic Windows product then you can make a 10 minute or less call to Microsoft and get your WIndows activated. This will allow you back on the Windows desktop and then you can install the drivers and get on the internet. Without the installation of the drivers the internet connection will not work.
Axel F.

My Mother in law messed up my Adobe reader some how to the point that it is no longer in my computer. I have tried to download it from the internet but it is not working. What am I missing? what else do I need to do? I am not even able to watch youtube...

My Mother in law messed up my Adobe reader some how to the point that it is no longer in my computer. I have tried to download it from the internet but it is not working. What am I missing? what else do I need to do? I am not even able to watch youtube...

Soccerdm,
a direct download of Adobe Reader X 10.1.4 (which seems to be the most recent standalone version that runs on Mac OS X 10.5.8) is here.

My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetim

My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.

If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.

Working on my page, everything looks good in iweb, I publish, I go check on the internet, and the fonts on the page go crazy. iweb doesn't show it that way. Why is this happening?

Working on my page, everything looks good in iweb, I publish, I go check on the internet, and the fonts on the page go crazy. iweb doesn't show it that way. Why is this happening?

Looks OK to me - is this what it should look like?:
Try clearing your brower's cache, and/or using another browser.

I have published my Ni logic through the internet ..

Similar Messages

Maybe you are looking for