I have purchased and installed Numbers. Where are the templates

I have installed the numbers app.  When I open it up, I can not find any pre-designed templates or spread sheets.  All I find is the getting started.  At one time I did see the templates, but now they are not visible. I don't know if I deleted them or what.  Any ideas>

I can create new spreadsheets but how do you view existing spreadsheets from my MAC to my iPad/iPhone?

Similar Messages

  • TS1702 I have purchased and installed Facebook, pages and numbers apps. However I am now unable to open any of these apps. When I click on the app the GUI just bleeps. Any suggestions please?

    I have purchased and installed Facebook, pages and numbers apps. However I am now unable to open any of these apps. When I click on the app the GUI just bleeps. Any suggestions to resolve this please?

    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or....
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Or....
    Try downloading another app - any free app is fine. See if that resets the other apps.

  • Hello, I have purchased and installed Lightroom 5 on my Mac Desktop.  I travel with a MacBook Air and would like to have Lightroom 5 on this device as well.  The MacBook Air does not have a CD/DVD slot.  How do I get Lightroom 5 on my MacBook Air so I can

    Hello, I have purchased and installed Lightroom 5 on my Mac Desktop.  I travel with a MacBook Air and would like to have Lightroom 5 on this device as well.  The MacBook Air does not have a CD/DVD slot.  How do I get Lightroom 5 on my MacBook Air so I can use it while travelling?

    Adobe - Lightroom : For Macintosh
    Just download and install 5.7.1. Don't worry about earlier versions.
    You'll need to enter your serial number to license the software.

  • I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer

    I have purchased and installed acrobat XI pro. When I run it a window pops up saying the the serial number I have provided is valid but a qualifying product cannot be found on the computer

    YOu have purchased or been sold an upgrade from Acrobat 9 or 10. You simply need to prove you own that old version using its serial number. be sure to keep both serials forever.

  • I cannot retrieve the serial number of the product i have purchased and installed once on my PC

    i cannot retrieve the serial number of the product i have purchased and installed once on my PC?!!!
    and there is no way to connect to anyone to get it.

    Hi,
    If you have purchased multiple license, please go to About_LWS to know how to Retrieve Serial Number.
    Thanks,
    Saurabh Rai

  • HT1600 after the update, i have only computers and settings icon, Where are the others ? youtube etc.

    after the update, i have only computers and settings icon, Where are the others ? youtube etc.

    Welcome to the Apple Community.
    Check you have an internet connection and that you are using the correct iTunes store location setting.
    Try restarting the router.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Open iTunes.
    Select your Apple TV in the Source list, and then click Restore.

  • I have purchased and installed 'make me older' but it is not displaying on my new IPAD

    I have purchased and dowloaded the app ' make me older' but it is not displaying on my desktop

    Did you purchase it one the iPad, or one iTunes? If via iTunes, you'll need to sync. If via the iPad, do a search by swiping right from the home page.

  • The product distribution file could not be verified. It may be damaged or was not signed. Cannot dowload Mountain Lion on iMac. Have purchased and installed on MacBook Pro

    After on installation cannot download and install on iMac after installing successfully on Mac Book Pro

    I have this problem also. I was able to download Mountain Lion to my daughter's Mac Mini without any trouble. However, I can't download this to my MacBook Pro. I have read other sites that suggest VirusBarrier is the problem and recommend turning it off in VirusBarrier>Preferences>Advanced. I have tried this and it still doesn't work, although some report that it has worked for them.

  • Is the DFS replication DFsrPrivate a junction point folder and if so where are the files stored?

    We have DFS replication set and see an arrow against the folder DFSrPrivate. Do the files reside at this location or elsewhere?
    Thanks
    David

    Hi David,
    The DFsrPrivate folder resides at replicated folders. This folder is in reality a junction point or, in simpler terms, a link to another location on the volume. It seems to point to a path under the ‘System Volume Information’ folder on the same volume.
    For more detailed information, you could refer to the article below:
    Backup/Restore of DFSR Replicated Data - Part 2: Inspecting DFSR's Footprint
    http://blogs.technet.com/b/filecab/archive/2008/06/22/backup-restore-of-dfsr-replicated-data-part-2-inspecting-dfsr-s-footprint.aspx
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Share photos by email - where are the templates ?

    Hello, can anyone tell me where in Aperture 3 are the nice looking pre-made templates which exist in iPhoto when sharing photos by email?
    Thxs,

    I just tried it from Aperture and it works great. All you have to do is select the photos you want to email from within Aperture. Right click, output, email and Mac Mail will open placing the photos you've selected in a new mail dialogue box. Once they are there, just click Stationary (which is in the upper right portion of the new mail dialogue box toolbar. After you click stationary, pick the template that you want, and the photos are automatically dropped into place. If you don't like the template, you can choose another and the photos automatically switch into the new template. If you don't like the arrangement, just drag the images around and they will automatically switch positions. It really couldn't be easier. And remember, you have the ability to control the quality of the image that is sent via the Aperture preferences, export tab. I don't think it matters when you are using templates, but for future reference, you should set this the way you want from the beginning so that the images get sent at the quality you want.
    I hope this helps.
    Mac
    Message was edited by: macorin

  • Where are the templates located in CS5.5 for Mac OS Lion?

    I'm trying to start a new InDesign project from a template and I can't find the way...

    The InDesign CS4 templates are available for download at InDesignSecrets.com:
    http://indesignsecrets.com/indesign-templates

  • I cannot print from iPhoto 9.2.1  It says that there are no "themes" installed. Where are the "themes" and how do I install them?

    I have 'upgraded' to iPhoto 9.2.1 and now cannot print my photos. It says that "this feature is unavailable" because there are no "themes" installed. Themes? I just want to print one of the 6,000 photos I never had problems printing before.

    Yes.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Write to Measurement File: Time has minutes and seconds. Where are the hours?

    Hi,
    I have dynamic data acquired by Express VI: DAQ Assistant from a CompactDAQ and wired to Express VI: Write to Measurement File. In the resulting text file in the header the Date is recorded correctly in DD/MM/YYYY format. The Time field should be formatted HH:MMS.XXX but all I see is MMS.XXX. Is there a setting I should change to see the hours?
    Regards,
    Andrew.

    Found the answer, sorry. Excel formatting issue. Not LabView after all.
    Please delete this thread.
    Cheers,
    Andrew.

  • I have downloaded and installed Lightroom CC through the creative cloud application. I cannot seem to get it to start up.

    I just finsihed downloading the new lightroom CC as apart of my CC subscription and I cannot seem to start it up.

    Log out of your creative cloud app (log out not quit it) and log in again. That fixes this problem for some people.

  • Forms and VB OCX - where are the properties?

    I've got an OCX written in VB6. In, for example, Delphi, I can
    generate a type library from it that includes every property and
    method available. When I try to import from the same OCX using
    Program | Import OLE Library Interface, I get - nothing! No
    properties, no methods, no events - nothing!! Anyone able to
    suggest if the fault lies in Forms [version 6.0.8.8.0
    (Production)] or in the way the OCX has been written in VB6,
    please?

    Hi;
    FormsCentral is integrated with "Paypal" for collecting payments.  This FAQ describes how to get started setting up Paypal with FormsCentral: http://forums.adobe.com/docs/DOC-1632
    Thanks,
    Josh

Maybe you are looking for