I have QT 10.0. Can I apply markers to align where to make a cut?

I have QT 10.0. Can I apply markers to align where to make a cut?
I have a 10.6.8 Mac OS X
Thank You!

I have QT 10.0. Can I apply markers to align where to make a cut?
I have a 10.6.8 Mac OS X
Maybe. It depends on several things.
1) Many users have described the built-in editor as non-functional with any or certain source files depending on their edit compatibility.
2) Even if it works, some users have reported the the edited results could not be saved.
3) Even if editing and saving is possible, the accuracy of the edits depends on the length of the source file and/or duration of the edit.
I personally prefer QT 7 Pro ($) or MPEG Streamclip (free)—both of which can perform GOP and/or frame accurate editing.

Similar Messages

I'm trying to isolate skin with a secondary layer and am successful. I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't see

I'm trying to isolate skin with a secondary layer and am successful. I want to blur the skin to reduce blemishes but when doing so the blur and degrain sliders don't seem to have an effect. Can I apply a gaussian blur fx on just that secondary? Can't seem to figure this out. Is there a better way to smooth skin?

Here's an Adobe help page for isolating skin with suggestion on the use of the blur slider also:
https://helpx.adobe.com/speedgrade/using/apply-secondary-color-corrections.html
And here's one of the original creators of Iridas/SpeedGrade, Patrick Palmer, a six minute vid-tut on using secondaries (specifically in CS6 but this hasn't changed):
http://tv.adobe.com/watch/learn-speedgrade-cs6/secondary-color-correction-in-speedgrade-cs 6/
I'd note, the "blur" and "denoise" tools on the Secondary tab are more about smoothing the keying of the secondary ... they apply a bit of blur or de-noising to make the secondary smoother and cover over the odd pixel or three or four that don't "fit" the key of the secondary in the middle of something you're aiming for.
In current SpeedGrade, I'd try using the Guassian Blur (Range) effect, and sample a good range of the skin tones.
And a lot of people use Red Giant's "Cosmo" plug-in over in AfterEffects or Premiere Pro ... it's a tool designed specifically for working skin tones, dealing with blemishes, wrinkles, spots, and such.
Neil

My parents got a mac mini. It does not have idvd preinstalled. Can they download for free? Where?

Where can you download idvd free?

Where can you download idvd free?
You have to purchase iDVD on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
http://dealmac.com/lw/artclick.html?1,527850,1872219

Regarding receiving texts as emails: Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

Regarding receiving texts as emails: Can you apply this setting to one individual? I want to continue to receive texts from everyone else except one person!

Don't want to block the person, just have all his texts going directly to my email so that I can maintain a continuous record of his text contacts (rather than remain in text form).
It appears that I must select an option that makes ALL texts go to email, which I'd prefer not doing.

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

How can I apply text position attributes (e.g. lower third) to more than one title at a time?

jhb3243
What version of Premiere Elements are you using and on what computer operating system is it running?
In the case of this theoretical lower third to be applied to more than one title at a time
a. Is there text in the lower third besides a graphic of some kind?
b. Are all the titles to which this lower third is to be applied all together on the Timeline or scattered?
If no text in lower third and titles all together, then, with text titles on Video 1 and lower third on Video 2, drag out the lower third to cover the length of the text titles on Video 1.
I do not find "lower third" title files to be in the same category as certain effects where the Copy and "Paste Attributes" or "Paste Effects and Adjustments" lend themselves so well.
Let us see what others have to say about all this. I will continue to experiment with what you seek and how you would prefer to get there. I am not optimistic but I will try.
Thanks.
ATR

When I synced my phone with my mac, the music that I had in my phone got transferred to my mac. 140 songs to be exact, however I can no longer see the songs on my phone, only the purchased album I have appears. How can I get the songs I had back?

When I synced my phone with my mac, the music that I had in my phone got transferred to my mac. 140 songs to be exact, however I can no longer see the songs on my phone, only the purchased album I have appears. How can I get the songs I had back?

Connect your phone to computer, and sync like this. Check the boxes for the playlists, artists, albums you want to sync. Then click Apply. If you have enough space on your phone, you can choose Entire music library.

I have done everything I can in all discussions. Itunes store not working. I have Windows 7 , 64 bit.

I have read all the replies to the "Itunes store not working". I have done everything I can to use any of the solutions. This is my 5th day. I give up. Need some help. As I can see there seems to be a lot of those problems.

I spent some time on the phone this morning with Apple. Here's a link they sent me: http://support.apple.com/kb/HT1923
It's more than just uninstalling Itunes; there are 5 other apps that have to be uninstalled and in specific order. This particular Knowledge Base article applies to Windows Vista or Windows 7. For other Windows versions you'd have to look up the article for Windows XP.
Hope this helps.

I would like to play an audio cd on my macbook pro. on either the mac or MS parallel window as I have that installed but can't

I would like to play an audio cd on my macbook pro. on either the mac or MS parallel window as I have that installed but can't

iTunes is part of OS X, which implies that iTunes was deleted, or that your OS X installation is corrupt. In either case, the easiest approach usually involves downloading the combo update for OS X — the so-called combo update, and not the delta update — and installing that.
Applying or re-applying the OS X combo update won't alter your user files, but will reload all recent OS X changes, and should also cause iTunes to be re-loaded.
If you are running Mavericks 10.9, then download and install the OS X Mavericks 10.9.5 combo update.
You'll want to have a backup of your system — updates don't fail often, but they can fail. If you don't have Time Machine or some other form of backups running, get that going first; before further changes here.

Can't apply some master pages to topics

Hello,
I have already logged a bug report on this, but I am hoping that someone else has encountered it and has a suggested workaround. I have searched the forums, but I didn't see this issue. We recently upgraded to RoboHelp 8, and we have installed 8.0.1.
Our help projects typically include multiple master pages (formerly called "templates"). Most topics use the main master page, but a few need to use one of our other master pages that is geared toward a different type of user. Most of our projects have at least 3 master pages.
After conversion from X5 to RoboHelp 8, in some of our help projects, we cannot apply the lesser-used master pages to topics. We can right-click the topic name or within the Design window and open the Topic Properties, and we can select the correct master page, either from the drop-down list or by clicking the Browse button, and we can click Apply. Initially, the topic will show the master page as being selected; however, the header from that master page will not appear grayed out in the Design window for the topic as it should, and when you save and close the topic, the master page is no longer selected for it. This problem does not occur if I select the master page that is used for most topics; that one gets selected and applied correctly.
This problem has happened to me and to 2 of my coworkers. I got my problem topics and templates to work, but I tried many things repeatedly and cannot pinpoint what made the problem stop happening. I am currently trying to solve the problem in a coworker's project without success.
Things I have tried:
1. Deleting and reimporting the master pages that are not working. (When I do this, RoboHelp crashes.)
2. Comparing the code of the non-working master pages to the code of the master page that does work. I saw no problems.
3. Deleting the cpd file while the project was closed and then reopening.
4. Manually changing the tags that appear in the code of the topics to see if I can fool RoboHelp into recognizing the master page. I tried putting in the meta tag and header placeholder tags, but this did not work.
Has anyone run into this, and if so, have you found a workaround?
Thank you,
Tammy

This was our error, not RoboHelp's. After trying several different things yesterday, I compared the code of a working master page to that of a non-working master page once again. I discovered an error in some JavaScript, and when I removed the extraneous code, the template worked. I apologize for not finding this before posting! I did try several things before I posted.
Tammy

I can't apply labels to images in version 2.1.1

Last November 3rd I updated IBooks Author to version 2.1.1 (459). Since that day I can't apply labels to images. I can edit labels for the existing images, but there isn't any label list when I import a new one. If I create a new widget, labels are applied and can be edited.
I've tested this issue with new documents and existing ones with the same result. I also tried to restore a version 2.1 from my previous TimeMachine backups, but no succes.
I've being working well since I installed Maveriks, until this version 2.1.1 update. It is a bug? I've read complains about the same failure in the comments of the App Store from Spain. Can I downgrade iBooks author?
I am finishing a techical book with hundreds of images, so, you know what I am feeling.

Might be a bug - best to contact Apple directly so they can take a look, I think...
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.
Good luck.

How can i apply gradient...

I have a rectangular shape movie Clip (Size :130px X40 px). I
want to apply linear gradient on it using action script. Can
anybody help me how can I apply gradient on it.
Note: This movie clip is made manually. Not by using
createEmptyMovieClip method.

i already checked this -
MAKE A OVAL ON YOUR STAGE AND GIVE THIS INSTANCE NAME 'ovl'
(withought single quote) and use the code under
here i am creating two movie clips on stage --
1st is 'ovl' and 2nd one is 'mc'
But to apply gradient on ovl i have to use setMask method
like this _root.mc.setMask(_root.ovl)
i do not want to use SetMask... I want to apply gradient
directly on 'ovl'
How can i do ??????????????
// create emtpy movieclip
mc = createEmptyMovieClip("mc",1);
// set the constants for the gradient fill
// the colors
col = [0x000066,0x0033FF];
// the alphas
alp = [100,30];
// the ratios
rat = [100,255];
//this.onMouseMove = function () {
// we will make a radial gradient
// and make it move with the mouse
// first we clear the previous gradient fill
mc.clear();
// get the mouse-position
// the x-coordinate
x = _xmouse-200;
// the y-coordinate
y = _ymouse-200;
// set the matrix for the transformation
matrix = { matrixType:"box",x:x,y:y,w:400,h:400,r:0 }
// now make the new gradient fill
mc.beginGradientFill("linear",col,alp,rat,matrix);
// now make the shape to fill
mc.lineTo(400,0);
mc.lineTo(400,400);
mc.lineTo(0,400);
// end the fill
mc.endFill();
_root.mc.setMask(_root.ovl)
Text
Text

Can we apply embedded font in extension to a text layer of Photoshop ?

Hi All,
I have embedded some fonts into my Flex extension panel of Photoshop.
Can I apply these fonts to any text layer?
Kindly help URGENTLY!
Thanks,
D.A

Here are 3 options for future reference:
1. With the setup you've described, apply a Match Move behavior to the text and make the rectangle the source. Change the Transform parameter to Mimic source. This way you can still adjust the text postion as needed, but the rectangle will drive the animation.
2. Use a group to do the animation. Put both your rectangle and text in the same group and animate the group's postion.
3. Use the Link behavior.
Each of these has it's advantages depending on what you need.

Can I apply credit memo against a Deposit through Autoinvoice

We have a requirement to credit back the amount from deposit which has balance > 0. I'm planning to use the Autoinvoice Program. I'm populating the REFERENCE_LINE_ID as the CUSTOMER_TRX_LINE_ID of the Deposit Line from CUSTOMER_TRX_LINES_ALL. I'm getting the below error.
Errors: 1) Your credit memo transaction can only credit an invoice or a debit memo line (1018863)
My Question is - Can we apply the Credit Memo towards a deposit through Autoinvoice Program ? If yes, please let me know the columns that we need to populate in interface table.
Thanks
Vasu
Edited by: Vasu on Jul 22, 2011 3:05 PM

Errors: 1) Your credit memo transaction can only credit an invoice or a debit memo line (1018863)
My Question is - Can we apply the Credit Memo towards a deposit through Autoinvoice Program ? If yes, please let me know the columns that we need to populate in interface table.Please see these docs.
Listing of AutoInvoice Error Messages and Troubleshooting Tips to Resolve each Error [ID 1138254.1]
Credit Memo Errors During Autoinvoice Process - Invalid reference line attribute value (REFERENCE_LINE_ATTRIBUTE1-15) [ID 405445.1]
Thanks,
Hussein

Can we apply saved filters to union reports in obiee 11g?

Hi All
Can we apply saved filters to union reports in obiee 11g?
I am able to apply saved filters for normal reports but not for union reports.
The catalog pane is blank, when i click on result columns or each criteria.
The only option i see is to manually create the filters for each criteria, dont i have any choice to use a saved filter for union report?
Is this a bug or something i am unaware of , Please guide me.
Regards
Pranati

I get the same issue. I thought that it's a problem in a security - the catalog pane is clear in a union report. But saved filters work in 11g. I migrated catalog from 10g to 11g and I see saved filters in the conditions. But you may add saved filters directly into xml. Go on Tab Advanced and edit Analysis XML. You have to add code like this
<sawx:expr xsi:type="sawx:savedFilter" path="/shared/FOLDER/_filters/FOLDER/FILTER_NAME" name="FILTER_NAME"/> in a right place.

Log files can be applied after an offline backup is restored?

When reading the Admin Guide I see above possibility.
I guess in that case the offline backup must be done in the Database Maintenance Mode: QUIESCE.
I think if the offline backup is done after the DB is shutdown, no log files can be applied.
Would you please confirm and share your experience on this?
Thanks a lot!

Hi Jennifer,
only to complete the answer of Jens, or "say" it less complex:
1.) Yes you could roll forward an offline backup. DB2 always end in rollforward pending state after a restore independent of the backup type (online | offline). In case of an offline backup you could complete the restore without logs, otherwise not.
2.) The offline backup is done in a special mode, it is neither online nor quiesced. Nobody can log on to the database as long the offline backup is running. To start the offline backup, you have to deactivate the database as described by Jens.
Best regards
Ralph

I have QT 10.0. Can I apply markers to align where to make a cut?

Similar Messages

Maybe you are looking for