I have quite a problem here, if anyone could help me, it's complicated.
Ok here is the situation,
I tired to buy new music on my iTunes and it said "iTunes requires Safari 4.0.3 or later to be installed to use the iTunes Store within iTunes. Use Software Update to download and install the latest version of Safari." So I went my System Update and my only update was Mas OS X Update Combined 10.5.8 so I clicked to update it and put in my password and it started to download when it stopped because it said "The update Mac OS X Update Combined can't be saved. You do not have appropriate access privileges. The Installer package has been moved to the Trash. To try again, open the package from the Finder." So I looked in my Finder and in my Trash for the installer package, and I couldn't find it anywhere. Then I decided to try and download a newer version of Safari 4.0.4 for Tiger but I couldn't because it said "You cannot install Safari on this volume. This update requires Mac OS X 10.4.11" (and I checked under the About This Mac and it said it was a 10.5.2, so why couldn't I download all this stuff?) This whole problem started when I couldn't buy new music on my iTunes, can you please help me with this whole messed up situation? Thanks, KB
The latest version of iTunes requires 10.4.11 or later. Safari requires 10.4.11 if using Tiger or 10.5.8 if using Leopard.
Apparently you have permissions issues on your system. I suggest trying the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Similar Messages
-
Problems with JVM (anyone could help me?)
Hi!!
I've installed the Java Virtual Machine on my Desktop yesterday, as a first step to install the other components necessary to begin learning Java. But it still don't load Java Applets on my Internet explorer.
I already configured on the Internet Explorer (Tools > Internet Options) all the options I tought that could be, but it doesn't work anyway.
I'm posting below the text that appears on the Java Console:
======================================================================
java.io.IOException: Unable to tunnel through proxy. Proxy returns "HTTP/1.1 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. )"
at sun.net.www.protocol.http.HttpURLConnection.doTunneling(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.setProxiedClient(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.superConnect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.access$000(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.https.PluginDelegateHttpsURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
at sun.plugin.cache.CachedJarLoader.download(Unknown Source)
at sun.plugin.cache.CachedJarLoader.load(Unknown Source)
at sun.plugin.cache.JarCache.get(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
load: class br/com/bb/aapf/bbteclado/CampoTeclado.class not found.
java.lang.ClassNotFoundException: br.com.bb.aapf.bbteclado.CampoTeclado.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 11 more
======================================================================
Does anybody know what may be happening??
Tks for you assistance!!
RodrigoHello Rod,
I can possibly tell you What is happening but cannot tell you Why it is happening.
What is happening is this. The applet container is trying to download the applet class file and the server is refusing to give it due to authentication/authorization failure.
Now you figure it out why it is happening.
Ironluca -
Hello. I have problem here can someone plz help. I have usb of 32 gb but i have problem with it while i was trying to partition of it and it fails and my usb disappear from finder and desktop i have tried every possible thing but nothing works .
Yea i tried in disk utility and its got faiiled and the partitation has deleted and when i tried to replug the usb msg show up by saying usb not compaitnle. With this mac and take me to disk utility and thanks for replying
-
My iMac suddenly has a USB problem. I can connect to drives and printers. I am able to pul info off from drives. When I try to send info to a drive or printer, the connection is lost. All USB ports appear to have the same problem. Can anyone help?
Please do 2-3 SMC and PRAM resets back to back and retest. Also use new cables, they can go bad.
Intel iMac SMC and PRAM resets -
My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.
I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7 -
I have both a MacBook Pro and macair but the pro won't let me in I think it something to do with hard disc or permissions as it says system profiler in utilities , if anyone could help I'd be very grateful
Restart the MBP and immediately hold the option key down. Release the key when you see the Apple logo. The computer will boot and show you a screen with two hard drive icons.
Select Recovery and hit Return.
On the new screen, select Disk Utility and hit Return.
In DU do this:
In the list at the left, select the name of your hard drive. (Be sure to select the name that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
When that is done, click Repair Permissions. Be patient!
When that is done, quit DU and restart in the usual way. -
No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks
This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
https://discussions.apple.com/thread/2475631 -
Hello,
I have accidentially deleted files in root folder of my iPad(1). Now iPad is dead completely. I would really appreciate if anyone could help me fix this.
Thanks in advance.Support for jailbroken devices cannot be given here. Go to the website that helped you get root access in the first place.
-
i have recently purchased an ipod touch 5th generation ipod for my girlfriends daughters! im trying to sync some music onto the device but it is not been recognized on itunes. i have the device plugged in but i cant find the device on itunes! I have plugged my phone in to check if its the cable but the cable is fine as my iphone synced up perfectly! wondering if anyone could help me out??
Hello there, dtumman.
It seems that for the issue you are describing you were referred to us from the very article that provides the troubleshooting steps to help resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Keep in mind:
Follow these steps, testing to see if the issue is resolved after each section.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Error when syncing wondering if anyone could help
alright well my problem I have been having lately is that i cant get all my songs on my ipod anymore i currently have a 5gen ipod vid 30gig and whenever i try to sync i get this message
"Attempting to copy to the disk "MY IPO" failed. An unknown error occured (-69)."
i have tried the restore function on itunes but that dont fix it, but recently my computer had a virus and i had to wipe and reinstall my OS and at the same time i got this virus my ipod was plugged in and syncing.
just wondering if anyone could help me out and ty in advance incase i forget to thank anyone later.It's probably best to check on the possibilities from the following document first:
iTunes displays a -69 error when syncing iPod -
PLEASE, ANYONE COULD HELP ME WITH THIS !!!
PLEASE, ANYONE COULD HELP ME WITH THIS !!!
hi, i was facing this problem from past few days...solution... WE JUST HAVE TO USE A USB 2.0 HUB... this solved my problem....E1713 is not able to connect to usb 3.0 as it does with 2.0.
-
Does anyone could help with autoviewer-pro 1.3
Does anyone could help with autoviewer-pro 1.3! Thing is that I want to use png images without background in autoviewer, I've tried everything all kinds of picture formats, alphas, gone through google, autoviewer forum.... but no answer how to do it. When I attach a picture in autoviewer galleryit...after it is still with white background in autoviewer flash!
Can enyone helpe with avice.
Thanks in advance!This post is from another topic but has to do with iPhone 4s unlock.
ArnettH_VZW
replied 11 hours ago
Good morning frank-bao,
In order for us to assist with unlocking your iPhone, there are some requirements that needs to be met. Please see below to verify that they are applicable to your situation.
Must be a Verizon Wireless customer. Verizon Wireless only unlock devices for Verizon Wireless customers.
The device being unlocked must be active on a Verizon Wireless line of service.
The line of service must be active at least 60 days.
The line of service must be in good standing for the past 60 days.
Customer may only have one 3G SIM Unlock per line every 10 months.
The customer's manufacturer's device warranty is not affected by a 3G SIM unlock as long as the customer remains with Verizon Wireless.
If you meet all of these requirement then we can certainly unlock your iPhone for you, assuming that it's not unlocked already. To get this process started or to inquire on if your device is unlock then please reach out to our Global support team at 800-711-8300. If you are already or still out of the country then we can be reached at 908-599-4899. Let me know if there is anything else that I can do to help.
Thank you...
ArnettH_VZW
Follow us on Twitter @vzwsupport -
Anyone could help me with this report. ?
Hi to all, anyone could help me with this report ?
I have this one:
SELECT 'Factura',T0.ItemCode, T0.Dscription, SUM(Quantity) as Cantidad, Sum(LineTotal) as Total
FROM INV1 T0 INNER JOIN OINV T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OCRD T2 ON T1.CardCode = T2.CardCode
INNER JOIN OSLP T3 ON T1.SlpCode = T3.SlpCode
WHERE ((T1.CardCode >= '[%1]' AND T1.CardCode <= '[%2]'))
AND T1.DocDueDate >= '[%4]' AND T1.DocDueDate <= '[%5]'
AND T3.SlpName >= '[%6]' AND T3.SlpName <= '[%7]'
GROUP BY T0.ItemCode, T0.Dscription
UNION
SELECT 'Abono',T0.ItemCode, T0.Dscription, SUM(Quantity * -1 ) as Cantidad, Sum(LineTotal * - 1) as Total
FROM RIN1 T0 INNER JOIN ORiN T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OCRD T2 ON T1.CardCode = T2.CardCode
INNER JOIN OSLP T3 ON T1.SlpCode = T3.SlpCode
WHERE ((T1.CardCode >= '[%1]' AND T1.CardCode <= '[%2]') )
AND T1.DocDueDate >= '[%4]' AND T1.DocDueDate <= '[%5]'
AND T3.SlpName >= '[%6]' AND T3.SlpName <= '[%7]'
GROUP BY T0.ItemCode, T0.Dscription
But now I want to introduce this sentence in:
Select I.ItemCode,I.ItemName,
(select price from ITM1 where ItemCode=I.ItemCode and PriceList=1),
(select price from ITM1 where ItemCode=I.ItemCode and PriceList=2),
(select price from ITM1 where ItemCode=I.ItemCode and PriceList=3),
(select price from ITM1 where ItemCode=I.ItemCode and PriceList=4)
From OITM I
Could you help me ?
Many thanks.Please try this one:
SELECT 'Factura',T0.ItemCode, T0.Dscription, SUM(Quantity) as Cantidad, Sum(LineTotal) as Total,
(select price from ITM1 where ItemCode=T0.ItemCode and PriceList=1) 'Price List 1',
(select price from ITM1 where ItemCode=T0.ItemCode and PriceList=2) 'Price List 2',
(select price from ITM1 where ItemCode=T0.ItemCode and PriceList=3) 'Price List 3',
(select price from ITM1 where ItemCode=T0.ItemCode and PriceList=4) 'Price List 4'
FROM INV1 T0 INNER JOIN OINV T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OCRD T2 ON T1.CardCode = T2.CardCode
INNER JOIN OSLP T3 ON T1.SlpCode = T3.SlpCode
WHERE ((T1.CardCode >= '[%1]' AND T1.CardCode <= '[%2]'))
AND T1.DocDueDate >= '[%4]' AND T1.DocDueDate <= '[%5]'
AND T3.SlpName >= '[%6]' AND T3.SlpName <= '[%7]'
GROUP BY T0.ItemCode, T0.Dscription
UNION
SELECT 'Abono',T0.ItemCode, T0.Dscription, SUM(Quantity * -1 ) as Cantidad, Sum(LineTotal * - 1) as Total,
(select price from ITM1 where ItemCode=T0.ItemCode and PriceList=1) 'Price List 1',
(select price from ITM1 where ItemCode=T0.ItemCode and PriceList=2) 'Price List 2',
(select price from ITM1 where ItemCode=T0.ItemCode and PriceList=3) 'Price List 3',
(select price from ITM1 where ItemCode=T0.ItemCode and PriceList=4) 'Price List 4'
FROM RIN1 T0 INNER JOIN ORiN T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OCRD T2 ON T1.CardCode = T2.CardCode
INNER JOIN OSLP T3 ON T1.SlpCode = T3.SlpCode
WHERE ((T1.CardCode >= '[%1]' AND T1.CardCode <= '[%2]') )
AND T1.DocDueDate >= '[%4]' AND T1.DocDueDate <= '[%5]'
AND T3.SlpName >= '[%6]' AND T3.SlpName <= '[%7]'
GROUP BY T0.ItemCode, T0.Dscription
Thanks,
Gordon -
If anyone could help me I would be HUGELY appreciative - Uni deadline today and need help!
Hi
I'm reasonably new to indesign but know the basics. I have a deadline today but my InDesign CS6 is behaving strangely - If anyone could help me I would be HUGELY appreciative.
I'm trying to type like I normally would but whenever I try to place a piece of punctuation at the end of a paragraph or line, it places it at the start of the line.. even if my cursor is telling it to do differently. (see image)
I'm trying to place it at the end of legibility where my cursor is but it places it at the start of clarity at the start of the line!? does anyone have any ideas, need help with this ASAP
Thanks a lot!
Joe@Joel – do you work with the Adobe World-Ready-Composer in conjunction with a RTL (Right-To-Left) character format? Maybe you could show us your paragraph with "Hidden Characters"on. Together with your definitions of the character style for the dot, the character style for all other characters and the paragraph style.
I could mimic something like you are showing with a very strange set of scripts generating a paragraph style and two character styles in InDesign CS5.5.
See the following screen grabs:
Character Style named "ZF_LTR" for all characters in the paragraph but the last one (the dot):
Character Style named "ZF_Arabic" for the last character in the paragraph:
Paragraph Style named "AF_MIXED2_LTR-RTL" for the whole paragraph. Not formatted properly for Arabic use. See the details in the section "Formateinstellungen" in the screen grab:
That would be an explanation…
Might be, that there is another one.
Uwe -
When iWorks for iCloud Beta become available I subscribed to it. After that I become unable to access iCloud at all as in all my devices I get messages to install it and other apps (find my phone, etc) that are already active. Anyone could help?
The first time an iPhone is connected to iTunes that is used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device or to set up the iPhone as a new iPhone.
The former does as provided - it transfers the backup for the other iPhone or iOS device to the iPhone replacing all data on the iPhone that is included with the backup being transferred. The latter does nothing allowing you to make your various selections for the iPhone sync preferences with iTunes.
This is designed to be done right away with a new iPhone.
If you don't have a backup for the iPhone with iTunes on your computer and don't have an iCloud backup that hasn't been updated since choosing to transfer the backup for your iPod Touch to the iPhone, the data that was on the iPhone is gone.
Maybe you are looking for
-
Photostream quit working on PC
Running the iCloud Control Panel on a Win7-64 PC. Had the sync folder set up, and all photos from my iPhone 5 appeared beautifully in the PC folder, just as they were supposed to. I got an iPhone 6 a couple of months ago, and it seemed to sync just f
-
Ipod classic sudden sound distortion from dock connector only
I have an ipod classic 160gb 7th generation. When I docked it one day the sound was very distorted and unplayable. This happens in different docking stations yet they play with other ipods. I can still sync and charge (through some but not all cha
-
Adding longitude and latitude?
Is there a way to add longitude and latitude to the metadata in Lightroom 1.2? I have the coordinates from Google Earth and now would like to add that to the photos' metadata. Even better would of course be if it's possible to link a location to GPS
-
Airport tab is missing from10.8.2
I want to network my iMac and MacBook over the internet, but the Airport tab is missing
-
IPhoto 9.4.1 continues to crash
Importing more than 300 Raw & JPEG files cause iPhoto to continue to crash. Cannot even finish importing. Will import just fine in Aperture. iPhoto randomly will crash when editing Raw & JPEG files. I have reinstalled OS, reinstalled iPhoto and h