I have read through the terms of Apple care extended protection plan but i need clarification.

I just read some ipad horror stories about the glass getting cracked. I am not too sure how Tough these babies are, but before i splurge on an extended protection plan for my practically brand new ipad2, i would like clarification as to whether accidental coverage is implied; say for example if the glass were to get scratched, or cracked; under the extended service plan, iit be a covered repair, parts and labor ?
Thanks for readin'
Rebecca

AppleCare is a warranty extension and covers manufacturing defects. It is not insurance and will not cover user-caused damage, such as scratching or cracking of the glass (unless the crack was determined to be due to a defect in manufacturing, not the iPad being dropped or impacted).
You can find more information including lists to Frequently Asked Questions and the precise Terms and Conditions here:
http://www.apple.com/support/products/ipod.html
Regards.

Similar Messages

  • Transferring Apple Care Extended Protection Plan

    I bought my friends iphone 3gs and she does not have the iphone box or the apple care extended protection plan box anymore but i  am able to see online that it is still in warranty but it is in her name. How can I transfer the iphone into my name without the boxes and apple care registration number?

    AppleCare is a warranty extension and covers manufacturing defects. It is not insurance and will not cover user-caused damage, such as scratching or cracking of the glass (unless the crack was determined to be due to a defect in manufacturing, not the iPad being dropped or impacted).
    You can find more information including lists to Frequently Asked Questions and the precise Terms and Conditions here:
    http://www.apple.com/support/products/ipod.html
    Regards.

  • Ok, one sentence, that's tough - I have gone through the 'firefox crashes when you open it' troubleshooting but my problem remains that firefox crashes when i open it, how do i fix this?

    Several days ago firefox crashed when opening and it does so every time i try to open it now. I am able to use internet explorer perfectly. In fact one way i discovered i can still open firefox is by using Advanced System Care (which i installed after the crashing so it was not in any way responsible) and going to 'test bandswidth'. Because firefox is my default browser it opened it up. I was able to enter safe mode in this way and restart firefox in safe mode. I then set firefox so that all plugins and extensions were disabled but this did not help. I am running the default theme. I will be happy to provide any further information if anyone can help..thanks in advance.

    See:
    *http://www.mozilla.org/en-US/firefox/channel/
    *http://nightly.mozilla.org/
    Note that the Aurora (28.0a2) and Nightly (29.0a1) build are updated daily and can be unstable being alpha releases.<br />
    You always need to install such a version alongside of the current release via a custom install and use a separate profile for each Firefox version.
    Make sure not to start Firefox after the installation has finished and use the Profile Manager to create a new (separate) profile for each version.<br />
    Do a custom install in a different program folder and use the Profile Manager to create a new profile for this version, so make sure not to start Firefox after the installation has finished.
    * http://kb.mozillazine.org/Testing_pre-release_versions
    * http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile

  • I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download.  I've gone through the terms and conditions multiple times and i can't find an 'accept' option?

    I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download.  I've gone through the terms and conditions multiple times and i can't find an 'accept' option?

    Hello jody5758
    Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    -Norm G.

  • I am trying to change my Apple ID.  I have gone through the steps up to verifying my email address.i have requested the resend verification email 5 times and have still not received an email.. I have checked spam and that my email is receiv.

    i am trying to change my Apple ID.  I have gone through the steps up to verifying my email.  I have never received the verification email.  I have asked 5 times for it to be resent.  I have checked my spam folder and knowmthat I am receiving other messages.  I still haven't received the verification email.  Any ideas of what to do from here.

    Contact iTunes customer support for assistance.

  • HT4363 I just purchased an Apple TV MD199LL/A, got it connected to my internet.  I can go to Youtube and watch videos.  I'm able to access Netflix.  All seems well except I cannot connect to my iTunes account.  I have gone through the list - home sharing

    I just purchased an Apple TV MD199LL/A, got it connected to my internet.  I can go to Youtube and watch videos.  I'm able to access Netflix.  All seems well except I cannot connect to my iTunes account.  I have gone through the list - home sharing is set correctly on both iTunes and my Apple TV.  The userid is correct on both. 
    Message "Loading prodrigu's library" and then "Could not connect to prodrigu's library".
    I had this same problem when I installed the REMOTE application on my ipad.  Everything on the list was affirmative, but had the same problem not being able to connect to my iTunes.
    What is missing?  Is there a firewall setting that could be causing this? 

    I don't mean to be facetious but sometimes the simplest things are overlooked.  To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open.  It also needs to be on the same network.  My network is dual band and works with either stream but a friend of mine does not.  He has to set the computer and the Apple TV to the same band.  Hope this helps.

  • I was told you you could view your app from your Iphone on the TV using Apple TV, such as the AFL football one i have purchased through the App store.

    I was told you could view your app from your Iphone on the TV using Apple TV, such as the AFL football one i have puchased through the App store. Is this true?

    Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

  • My iPad keeps showing my inactive email as my apple ID instead of the current email. I have gone through the process of managing my account ....it has all been verified yet I cannot access my updates. What do I do?

    My iPad keeps showing my inactive email as my apple ID instead of the current email. I have gone through the process of managing my account ....it has all been verified yet I cannot access my updates. What do I do?

    - Have you went to Settings>Store and signed out and then signed back in?
    - Did you by chance create a new account? Apps are locked to the account that purchased them and you have to sign into that account to update apps purchased with that account.

  • How do I get iMessage to activate, I have read through all the instructions but it still says activation unsuccessful?

    How do I get iMessage to activate, I have read through all the instructions but it still says activation unsuccessful?

    Are you using a supported carrier? Do you have a plan that permits text messaging?
    The iPhone uses a 'silent' SMS message exchange with Apple's servers in the UK to activate. If you are not using a supported carrier, and/or your account is not provisioned properly for an iPhone, the activation may not be able to complete.

  • I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but I do not want to delete/lose their data

    I had an unauthorized purchase on my old apple ID so I created a new one since the old one had been deactivated and now I cannot update any of my apps, I have read that the apps will be tied to the old account but since the old one was deactivated I cant update them and I do not want to delete/lose their data, re download, and start all over again. Is there anyway to go around this issue?
    thanks

    Ask Apple to re-enable it. I had an unauthorized purchase last October. They disabled my account until the problem was solved. However, I asked them to reopen it, and they just asked me to provide some security information (billing address, a recent purchase you made, etc.), and then they re-enabled it.

  • IPhone 5 not being recognized in iTunes (Mac). I have the latest Software update for iTunes, my iPhone, and my Mac. I have gone through the iTunes connectivity troubleshooting, no luck. Any suggestions/solutions?

    The reason I found this problem is that I did a complete reset of my iPhone, so it reset all the content, through settings on the phone. That ended up deleting the ringtones I had. I tried searching up the same tones, however you can't "Install" already purchased stuff like you can in the AppStore.
    I can't "iTunes wifi-sync" because you need to have connected at least once to the computer before you can wifi-sync, but because I reset my phone, it doesn't "remember" it once synced with my Mac cause I reset it.
    I have gone through the "iTunes connectivity troubleshooting", nothing worked.
    http://www.apple.com/support/iphone/assistant/itunes/#section_1
    My iPhone charges fine with the USB-Wall outlet adapter, so its not the lightning connector or the USB connector on the other end of the cord.
    All the USB ports on my Mac are functionning (working with other cords for printers, etc.), but still the iPhone persists not to be recognized in iTunes.
    So I am guessing iTunes is the problem.
    Any Help, Solutions, Suggestions, would be appreciated.
    Thanks.

    I had not tried that article, however I already went throught the troubleshooting assistant, which covers everything that article has.
    I am about to try to delete and re-install iTunes though, which was mentioned in your artile link.
    Thanks for the help.
    I'll post my findings/results.

  • HT1800 Trying to add a wireless printer to my MacBook Pro.  It was working properly until we had to buy a new modem.  I have gone through the steps associated with my printer and the other laptop in the house (Dell) working right. MacBook says printer dis

    I am trying to add a wireless printer to my MacBook Pro.  It was working properly until we had to get a new modem.  I have gone through the steps with the printer customer service rep, and it was working properly for one day.  When I booted up the next morning, the printer was no longer "connected".  It will work if I have the printer and computer connected, but I much prefer the wireless capability.  Suggestions? The printer is a Brother MFC7860DW.  The other laptop in the house (Dell) can print wirelessly so I don't think it's an issue with the modem or the printer.

    Hello,
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase it...

    So, about a week ago my macbook pro started having lots of issues: wifi connectivity, slow performance, sound issues, spotlight wasn't working. After going through the issues with apple support, they decided the best course of action was to erase the hard drive and do a reinstall. Since I have a recent backup this seemed like a good enough option. They were kind enough to send me a copy of the snow leopard disk to do the install since we couldn't get it to complete through the disk utility. Not sure why, since it says we are fully connected, it just never completed.
    Anyway, so now that you have the background here is the new issue. The macbook pro keeps spitting out the disk I'm trying to install from. Disk utility and using the 'Startup Disk' function from the apple menu doesn't read the disk.
    Can anyone suggest a solution to this vexing problem?
    Thanks in advance.

    Jeremy.Laurin,
    have you tried agb76’s approach here?

  • TS1567 I have tried manually removing itunes and reinstalling. i have gone through the sevices anf tried turning on the AMDS. i have tried turning off the firewall. i have tried restoring my device. i have tried "fixing" the AMDS in the add/remove program

    I have tried manually removing itunes and reinstalling. i have gone through the sevices anf tried turning on the AMDS. i have tried turning off the firewall. i have tried restoring my device. i have tried "fixing" the AMDS in the add/remove programs. I have tried using a different device. i have tried using a different cable. I have tried all of the steps given in the link supplied by Apple. None of these things have fixed my problem. I still have the Error Message "The Apple Mobile Device Service started then stopped. Some services stop automatically if they have no work to do, for example, the Performance Logs or Alerts service. I am using Windows XP. I am leaning towards a last resort which would be to wipe my hard drive and start from scratch. Does anyone have a solution?

    chicx wrote:
    This is the third time of writing this on your Apple Support Communities!
    Not with your current user id.
    Far too much uneccesary information in your post, which only confuses things, a vast amount!
    Let's start with iTunes.
    Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
    With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
    Once you have doen those two things, check to see if the iPod is seen by iTunes.
    chicx wrote:
    By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
    Really?
    OS stands for Operating System. (In computer speak, IO means Input/Output.)
    iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
    I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

  • I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

    I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

    I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

Maybe you are looking for

  • Error in process chain pushing step

    Hi Experts, We encountered an error in process chain pushing step. The error is "Process ZXXXX, variant 4UBK25S73O99DNLFQ0Q55EBTY, ended with invalid status". Data is pushing from OHD to PI/XI system. Unable to trace error and even not able to see th

  • R/3 - XI connection

    Folks, For an RFC connection from a R/3 to XI what permissions does the user in XI need to have to route/transport/map idocs? Does this need to be a service or dialog user? In "Mastering IDoc Business Scenarios with SAP XI" on page 64 it says you nee

  • PDF Information isn't saved.

    I created a PDF in Acrobat 9 with editable fields. When I fill out the PDF using Preview or Safari and save it, none of the information that was entered is saved. When I reopen the PDF, all the text fields are blank. Can anyone else reproduce this?

  • Entity Beans

    Hi, I am new to the EJB technology. I want to run an example for a Bean Managed Persistence. With out using any deployment tool, i would like to create the xml files and run a buil.cmd which contains the steps for deployment. Please let me know how t

  • Elements 11 install to mac and organise

    I'm having alot of trouble installing my Elements 11 into my Mac so opded for trial can't find serial no. So installed trial when it went into organiser my iphotos where all over the place In iphoto and Appiture they are tilted and catogrised. In org