I have recently bought a zen touch (20gb) and need help putting music on
I have recently bought a zen touch (20gb) and i can't figure how to get music from Creative media Source to my Zen. I know how to select all tracks (i have 745) but i can't find the transfer button. If someone could help me it would be greatly appreciated.
You can use either the left arrow or the right arrow to transfer, depending on whether you view the content of your MP3 player on the left or on the right. Creative MediaSource is so fliexible that it offers you to view your different music sources in different panels. Apparently, you you may not be aware that you can view the content of your MP3 player in the right panel. Just to to the View Menu and you can select what you want to view in the right panel.
Similar Messages
-
I have recently bought a second I phone4 and have the same apple ID on both of them, strangely I noticed the messages sent from one phone appearing the other one along with any pictures I sent from one of my Iphones. Is it possible to see the same msgs.
You need to setup different Receive At addresses for iMessage.
If you don't want the same pics on each, turn off PhotoStream.
User Guide -
i bought a ipod touch 3 i need help on this is there a youtube app that has a cach download to play youtube video's offline within the app if there is one can someone fill me some info on this matter
You can only use apps that are compatible with your dvice and ios version.
The secons gen ipod touch can only go to 4.2.1.
If you are running 4.2.1 then you can only use apps that require 4.2.1 or lower. -
I recently bought a new iPod 5gen and the iPod dosent hold it's charge it stays at 40 sometimes 20 percent half an hr goes by and it says it's fully charged once I unplug it it says it has 20 percent what can I do to fix it or what can I do about it?
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I just bought An iPod touch 4th generation yesterday, it was working fine I could
Download appl from the store from my iPod without a problem . Today however every time I try downloading something from my iPod touch
it. Doesn't download a message pops up saying " cannot connect to iTunes store" why? I am connected to the Internet and I can easily go on safari and google with. NO problem but everytime I go on the app store it gives me that message can you please help? My iPod isup to date and so is iTunes I so tried bar restarting my iPod and it worked for about 2 minutes the the message kept popping up Again please help me . Thank youIf you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
If your iPod is defective and not abused Apple will exchange it at no cost.
Apple Retail Store - Genius Bar -
above
Put the iPod into Recovery Mode and then restore it:
http://support.apple.com/kb/ht1808
If that still doesn't work, as a last resort try DFU mode:
http://www.iclarified.com/entry/index.php?enid=1034
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
Something has really been bugging me. Two days ago i bought a Macbook Pro. I like to facetime my family since they live abroad. Well when a family memeber rang my facetime, i realised that only my iphone rang and not my macbook, i waited for a while to see if it just needed time to introduce the call, however this didnt work out. I was wondering if anybody can help me sort this problem...
Thankssee
http://support.apple.com/kb/HT5538
mac 101
http://www.apple.com/support/macbasics/
also
http://support.apple.com/kb/TS4185 -
I am not seeing the band in between the Library and Project that has Play button and other command buttons. When I go to IMovie and Preferances, I see the
only options as follows "Clip: Apply Slow motion automatically" and Theater : Automatically upload content to icloud. But various forum discussions mention that this should open up options for browser tab, inspector tab etc. I looked at other menu's and I do not find anything. Can somebody help solve this.After repeated search, I found my answer. I have both iMovie App on my Mac. Sadly they don't share the library or events. I liked the version 9 having inspect tab and others where you could manually enter many values which in version 10 takes hec of playing around with your mouse.
For example, In version 10 you have hold the mouse or trackpad to adjust the % of sound of strip and still may not get to desired value. In version 9, you can bring up a window for adjusting audio and enter the values directly. This is user friendly.
I guess, I have to live with two versions for a while. App store does no longer haver version 9. Hope any new updates to OS wont automatically delete version 9. -
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
What is a Fat 32 which I am suppose to download inorder to work on a MAC for external drive to be compatable ?
Bad advice. You do not need or want FAT.
You want GUID and Mac HFS Standard Journaling.
You don't download when you write files, or when you format or erase a drive.
General purpose Mac troubleshooting guide: Isolating issues in Mac OS X
Creating a temporary user to isolate user-specific problems: Isolating an issue by using another user account
Identifying resource hogs and other tips: Using Activity Monitor to read System Memory and determine how much RAM is being used
Starting the computer in "safe mode": Mac OS X: What is Safe Boot, Safe Mode?
To identify potential hardware problems: Apple Hardware Test
General Mac maintenance: Tips to keep your Mac in top form -
Technophobe help needed!! I have a creative zen sleek photo and need help!!! PLEASE REPLY
model number creative zen sleek photo daphdd09 hi i hadnt used it for a while i then put it on charge last night and when i got up and took to work this am it has now frozen when i turned it on. I rest it it and charged it and it says realoading library and then freezes again no buttons work dont know what else to do please helpxxx
Hey, ZVM_00, I think these are what you're looking for. I'm not sure which one you want to buy but here they are:
http://us.creative.com/products/product.asp?category=3&subcategory=264&product=472 2
http://us.creative.com/products/product.asp?category=3&subcategory=264&product=505 0
As far as your problem with connecting, I can't really help you there. It COULD be your computer but I remember someone telling me to use a different USB port than you're already using. If it's plugged into the front of your computer, try using a back port. That worked for me (for a while anyway). Good luck to you two.
And try what I said, it may work! -
Just Bought New Mac Mini Server and Need Help on Migrating Old Single User
This is for my home / home office The issue is I was unable to connect to my old computer using migration assistant for some reason, but I didn't want to go down a rabbit hole to figure it out.
I would like to transfer all of my applications and prefs / settings to the new machine and I was thinking about using a synching program to do it so I wouldn't mess with the SL Server settings. I suppose I could do this manually but am concerned some hidden files or settings may not get moved properly. I am able to mount my old hard drive on the new mini so I just need a strategy. Thanks.Good question - my angst is subsiding as I type. I was concerned that my preferences and other application linked things like Application Support were the same as it was, but I suppose if I have to mess a bit with it upon opening or reinstalling a program is the worst thing that will happen. After going thru the list of programs I realize that like most people I regularly use about 15% of the things in my Applications folder. The biggest hassle is Adobe CS4 which I need to get reauthorized by Adobe and this could only have been solved if I de-authorized it before blowing out my earlier computer. Luckily that is worst issue I am encountering.
-
I've just bought an 80gb iPod and need help with music videos.....
...I've downloaded a music video which iTunes has put in my library under Music when I thought it would be under Movies. I can't move it to Movies, it won't let me. I can only transfer it to my iPod as a music file. How do get to watch it on my iPod?
Thanks
AndyI suggest copying your entire iTunes library to your new computer, also you might want to copy the photos you want to save. Then sync your device to the new iTunes and copy over your music, documents and photos that you want.
If you are no longer going to use the old computer you should open up iTunes on the old computer and use the menu to deauthorize it. Be sure to use the same iTunes menu on your new computer to Authorize the new one. -
I have a PC and a Mac, and need to put music on from both computers, is this possible?
.
No, it is not.
Iphone will sync/manually manage with one and only one computer at a time. if you syncs/manage to another, then the current content will be erased and replaced with content from the new computer. -
I have a iPhone and iPad on one iTunes account, I have recently bought two further I touches fir the kids , should I set them up with their own apple ids and the can I transfer purchases through all devices,
Hi jhyiesla,
Im not sure wether I got you right or not. But my advice/s would be as follows:
These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
5) now you can empty your trash on your mac.
Further,
- You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
- If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
jl
Maybe you are looking for
-
Remove duplicate entry from table
Hello all, In my one table File Stage log (File_Stage_Log_ID int identity(1,1),File ID int ,Quarter_Date nvarchar(50),StageID int ) have done duplicate entry by mistake on similar quarter_date something like .. FILE_ID Quarter FILE_STAGE_LOG_ID STAG
-
Transferring/opening AVI files off camcorder. it wont open! help! not playable?
I bought a Toshiba camcorder a bit ago and this is my first time transfering the videos to my computer. It won't open/play because it says quicktime doesnt play AVI files. what do I do?
-
Do you know what is wrong at this?
import java.awt.*; import java.awt.event.*; import java.applet.Applet; * beschrijving * @version 1.0 van 21-11-2007 * @author public class LeeftijdcategorieApplet extends Applet { // Begin variabelen private TextField leeftijdVeld = new TextField();
-
Hi , when doing some work in biw side, i got a run time error of Dead lock. it is a SQL statement error. INSERT L_TAB from G_U_tab. in this statement i got runtime error(dump) of dead lock. what i have to do??? pls help me.
-
SerializedSystemIni.dat in 6.0
Hi, Could someone explain what this file is for? If this file is not found, weblogic server complaints and won't start. Sushil