I have recently bought an iphone 5 and have synced it with my girlfriends laptop and taken some of her music. i have also bought music off my iphone. i want to sync the iphone with my parents imac and take some of my dads music. Is this possible?
i have recently bought an iphone 5 and have synced it with my girlfriends laptop and taken some of her music. i have also bought music off my iphone. i want to sync the iphone with my parents imac and take some of my dads music. Is this possible without wiping the iphone?
An iOS device can only be synced with one iTunes library.
Similar Messages
-
I bought the iphone 4s about a year ago, he was not new. The seller told me that he did the factory unlock, but he lied. Now I live in Russia and want to use the iPhone with a local GSM sim card. Serial number (removed), IMEI (removed). Thank you!
Personal info removed to comply with the Verizon Wireless Terms of Service
Message was edited by: Admin ModeratorEdge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions. -
I have had Aperture since version 1.0 and bought every upgrade. Now I want to transfer the software to my new iMac but I have to enter the original Serial number that I cannot locate. Any ideas what I can do, please?
The original serial number should be in the box with the installer disk.
If you cannot locate the serial number, contact Apple for a replacement serial number. You will need to provide a proof of purchase.
See: Pro Application Replacement Serial Numbers
Regards
Léonie
P.S. The menu command "Aperture > About Aperture" will show you your Aperture 3 serial number on your old mac, but not the previous serial numbers. -
Im using iphone 4 uk unlock , it has ios 4.2.1 and it does not have software update option.Now i want to update the phone with latest ios is it possible and tel me how ?
The update to iOS 5.0 & higher is an erase/restore deal, so make sure you follow the directions here to update your phone:
http://support.apple.com/kb/ht4972
iOS 7.0.4 will be installed. -
I have an apple TV 2 which mirrors my ipad and iphone beautifully. I want to do the same with my 'later 2011' macbook pro but there is no option I have checked firewalls and done all updates etc but no joy...PLEASE HELP!
According to:
http://www.apple.com/uk/osx/specs/
Your MBP should be compatible, BUT it needs to be running Mountain Lion.
AC -
I cannot retrieve the password for the wifi connection on my imac and so cannot access the internet with my ipad at home. I have a cable modem. Help please!
If you mean that you cannot remember the password for your WiFi network this will work for you - or it should work if you are the administrator on the Mac.
You will need to be logged in as the administrator on your Mac and you must know the password - Open Keychain Access on your Mac in the utilities folder, click on Passwords. Find the Airport Network Password listed on the right. Double click on it. Click on show password in the the window that pops up. Enter your administrator password when prompted and click allow.
If Keychain is locked - you must enter the administrator password there as well to unlock it and access the password.
If you have set the Mac up for Internet Sharing for the iPad to share the Mac's connection, just create a new network On the Mac with Internet sharing and a new password. -
I have an original iPhone running version 2.2.1. I wish to get rid of the phone, but before discarding it I want to remove the email records, phone book information, and photos. I would like to leave the other apps in place. Any suggestions?
Delete you mail account on the phone and disable to sync your mail account in the info pane in iTunes with your phone connected, same for contacts. Also deselect photo syncing in the photo pane. After the following sync, your mail, contact and photos should be gone.
Photos inside the camera roll have to be deleted on the phone.
Remember, that apps only can be used with the account they were bought with. If the phone will be set up with a different iTunes account, all of your apps will be removed.
Message was edited by: Ingo2711 -
I have an old iMac version 10. 4.11 and I have the iPhone 3GS which I cannot upgrade the latest applications I want to buy the iPhone 4S but I need to back up all the information on my iMac and move it to a different computer contacts songs etc which is the easiest way to do this
Glenn,
I tried upgrading to leopard, even bought the software and brought it home but it wouldn't let me. So i went back to apple, gave them the specifications of the machine and been told my machine is simply too old for leopard. This is incredible to me because it really isn't THAT old (i think just a little over 6 years maybe) and yet i'm left out on the curb when it comes to using newer apple products. I understand technology moves on but the mindset that i am supposed to dump a perfectly working machine after a couple of years or face not being able to use any other apple product is counter to what thought apple was about. -
I have an iPhone, an iPad, 2 iPad mini's and 2 iPod Touch's that all share the same apple id. I want to separate the iPhone so that texts are not seen on the other devices but I still want them to have the iMessage ability. How do I do that?
Not sure if you can have 2 Apple ids contact Apple.com/I'd You may to set IPhone up as new with a different Apple ID & password. Bsydd uk
-
Hi! I sold my Iphone on ebay. The seller wants to connect the Iphone with his Apple ID, but it did not work because it says that the Iphone is already connected with another Apple ID. How can I get rid of this old connection? What do I have to do?
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
MaggySimpson wrote:
Hi! I sold my Iphone on ebay.
Follow the instructions to remove a device you no longer have.
From here > http://support.apple.com/kb/PH13695?viewlocale=en_US -
I have a Mac book pro(13 inch non-retina, i7) with regular drive, I want to replace the drive with SSD, so can I do it for Mac book pro purchased in 2012 and which SSD is recommended.
I am looking for 500 to 700GB SSD.
ThanksUpgrading your MacBook Pro with a Solid State Drive...
...call back with any questions.
Clinton -
I have an Iphone4 and in this phone are about 900 photos.
How can I all the photos transport to my Imac and on the Imac definitly store?; and on the Phone delete all this photos?
joeThe first section of the following has instructions for transferring photos from an iPhone to a Mac and deleting the photos from the phone: http://support.apple.com/kb/ht4083
-
I have two iphones one older iphone4 and one newer iphone5. I want to set the iphone4 as an Airplay receiver and the other iphone 5 as the sender. do you know if this is possible?
Sorry. Apple's policy states that accounts cannot be merged > Frequently asked questions about Apple ID
Contact Apple for assistance > Contacting Apple for support and service -
I recently update my iphone and now is not allowing me to access my contacts, emails etc. When I try to switch it on it has an itunes symbol on the front with the usb plug and an arrow. What do I do to get my contacts etc back and make phone calls?
To be more clear:
Was you phone hacked/jailbroken BEFORE you hooked it up? -
I have an iPad Retina; if I download email onto it I then cannot download the same email onto my iMac. and vice-versa. I have all settings set to leave a copy on the server so cannot understand why email will not download to both devices. Can anyone help please?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Cheers, Tom
Maybe you are looking for
-
How can I change 'jpg' Icon to a thumbnail sized photo?
hello all, When i connect a camera, phone etc to my mac and browse its images instead of getting lots of easy to search through thumbnail images all I can get are the 'jpg' icons. If I want to find a specific photo that I have not yet named I have to
-
Got a new HDD 320gb 7200rm Western digital for my macbook
so I take out the old one, then I plug the cable into the new HDD place it in close my macbook and turn the computer on to find a blinking question mark logo, try putting my external HDD in, doesn't work, put in my osx disk that came with my macbook,
-
Can we change Condition Tables
Dear Experts, can you please tell me can we change condition tables for SD example 017/018? T code for this is M/04 Requirement is now i need to check the checkbox With Release Status.. Can anybody help me? Sachin Edited by: Sachin Bidkar on Aug 12,
-
Hi, I've got one question regarding the administration of the BI Publisher, can I have multiple admin accounts where the data sources are just available to a certain admin? I just don't want that the admins can use the data sources of other admins or
-
How to get 'clover.cmd' running as Windows service?
Right now I have the InDesign instances all running great as services so on a server reboot they start up fine. The clover/lbq part is just the .cmd script and it's not running as a service. I looked in the documentation but haven't found any info o