I have recently changed to an iMac from a Windows PC. How do I delete files and format the memory card in my helmet cam?
I have recently changed to an iMac from a Windows PC. How do I delete files and reformat the memory card in my helmetcam?
If you return the memory card to the helmetcam, it may choose to reformat it before use; back to some FAT-16 or FAT-32 format many of these third-party cards and cameras use. Unless you were going to use it for Mac OS X and format it with HFS+ or in a partition map for Mac data, etc.
If not, the easiest way to reformat the card may have been in the camera itself. I've formatted several kinds of camera cards, drives, USB flash drive, and others. The means varies with the intended purpose. Sometimes the default is the best; since it is platform neutral if the device is seen by both players.
Good luck & happy computing!
Similar Messages
-
I have some usses with my iMac. In this days i am working in videos and suddenly the computer turn off i am very worried about it because the computer is new do not have more that 5 months, the other problem is i am working in whatever thing and suddenly the music is on and i do not nothing. Please help me.
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
BTW this is the iPod touch forum -
I have two Apple ID, how can I delete one and use the email address associates to the main one?
I have two Apple ID, how can I delete one and use the email address associates to the main one?
If you abandon one of the Apple IDs you will also basically be abandoning any content that you have acquired with that Apple ID. Content can only be updated and re-downloaded with the Apple ID that was used to buy it. Apple will not combine the content of Apple IDs and Apple will not transfer the content from one Apple ID to another Apple ID.
-
My mac book startup disk is full and when I start it, it give me a blank blue screen. I have tried the shift upon start
and I started in safe mode, and it gave me the stars screen. How can I delete files to fix the problem1. Start up in Safe Mode.
http://support.apple.com/kb/PH11212
2. Empty Trash.
http://support.apple.com/kb/PH10677
3. Delete "Recovered Messages", if any.
Hold the option key down and click "Go" menu in the Finder menu bar.
Select "Library" from the dropdown.
Library > Mail > V2 > Mailboxes
Delete "Recovered Messages", if any.
Empty Trash. Restart.
4. Delete old iOS Devices Backup.
iTunes > Preferences > Devices
Highlight the old Backups , press “Delete Backup” and then “OK”.
http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
5. Re-index Macintosh HD
System Preferences > Spotlight > Privacy
http://support.apple.com/kb/ht2409 -
I had to reset my phone and I only have one of my ringtones I had 4.. Why'd it delete 3 and not the last one and now I can't get em back without paying for them again!!! What the **** is up with that??
Yup, your question and Diane's answer helped me also. Tho' I had had problems before getting into the iTunes store I always managed to find a way. Today they had me blocked cold with the "Update to 10" advert no matter what I did. Other questioners are being told, incorrectly as it turns out, that they have to update their OS to accomodate iTunes 10 and upgrade to iTunes 10. I did the download which did not take up much more room on my crowded old hard drive and now I'm back in business.
-
you can't open photo library using this version of iphoto. you have made changes to your photo library using a newer version of iphoto. please quit and use latest version of iphoto. iphoto 11 is installed.
This is a message you got?
If so, as your post isn't clear, it may be a bogus message caused by a corrupt database.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
HI, I try to open my Iphoto but a message (topic) appears and won`t let me in.
Well you have a problem that you need to address
Note that this response gives you all the possible information about yoru problem based on the zero information that you have proviced
What version of iPhoto? Of the OS? where is the iPhoto library located? What has recently changed? Have you opened this library from a different computer?
LN -
I have just launched icloud on my windows 7 laptop, and stupidly followed the instructions and added my outlook email contacts which come up as email addresses to my whole icloud contacts. So, there are now 1000's of contacts which have now appeared on my iphone.
How do I delete these email addresses and preserve the original straightforward names with telephone and address contacts? I am not very technical and am frustrated in my attempts to rectify the situation.
ThanksFor your contacts go to settings on your phone - mail contacts and calendars - scroll down to contacts and change display order to the one you want ( you can also change sort order, but ususally people prefer last name first and see if that is what you have).
For your yahoo emails go on your computer open outlook
In Outlook 2010, choose File > Accounts.
Click account settings and confirm the command by clicking "Add and remove accounts or change existing connection settings."
Select account and click "Change."
Click "Advanced."
Click "More Settings."
Click the "Advanced" tab.
Enter "7" in the box to the right of "Remove from server after."
Click OK.
Close Account Settings.
If you have outlook 2007
In Outlook 2007, choose Tools > Account Settings.
Click the account you wish to edit and then click Change.
Click the "More Settings" button.
Select the Advanced tab located across the top of the window.
Select the "Leave a copy of messages on the server" option.
Select the "Remove from server after" option.
Enter 7 in the box to the right of "Remove from server after."
Click OK.
Close Account Settings. -
Why can't I uninstall AirPort 4.2 from my Windows 7 PC.. I tried downloading and reinstalling the 4.2 but during the installation process I get an error. It reads... "1608: Unable to Create InstallDriver instance Return Code -2147024894
You should not install it again..
Boot the computer into safe mode and try the uninstall again.
No luck you will have to manually uninstall which is a pain. Delete the files and open regedit and delete the registry entries.. better still use the system restore to go back to a previous system where you had no 4.2 installed..
Or just ignore it and install the latest 5.6.1 and if it gives trouble well do a clean install of windows. -
How do i delete files and have the deleted space become available
When i delete files, the system does not show the deleted space as available. How do I fix that?
Have you emptied the trash?
-
I have tried to access the itunes store by many different means. I know I have account balance as I put in 2 gift cards back in March and have not used them all. I recently installed and uninstalled itunes several times but I still cannot open it on my computer. When plugging in my ipod shuffle it does not automatically load either although my computer says it's working correctly.
Click on the "Start" button. Click "Run." Type the word "cmd" in the open box. When the DOS screen comes up, type "netsh winsock reset." Press "Enter." Type "exit" to close the DOS window and go back to Windows.
Restart the computer.
Read more: http://www.ehow.com/how_2125133_do-winsock-reset.html#ixzz2kyccghec -
I am wondering if fonts look different on a PC than a Mac. The font I am using is Cygnet Round, and it is completely different on my PC. I am at a loss....
Any help would be greatly appreciated!Hi John, I am using Adobe Illustrator CC Version 17.1.
-
can't download anything from app store or itunes. everytime i try to install an app i get this error "there is a billing problem with a previous purchase. please update ur payment method". i have recently changed my visa debit card and home adress and when i make these changes i still get the same error.
will u please help me out?Are you listing the billing address for the card correctly? The address in the iTunes/MAS account must match the address on your bill exactly.
-
I have recently changed from a macbook to macbook pro and all my files were saved on time machine but some won't open. How do I open them?
Are you trying to open the backup files via the Finder or an application? If so, that's not how you should access your backups -- use the "Star Wars" display, per #15 in Time Machine - Frequently Asked Questions.
How did you get your stuff on the new Mac?
It sounds like you may have skipped the offer to transfer it when your Mac first started up, created a user account, then used the Migration Assistant app instead. If so, that may be the problem; doing it that way means you end up with an extra user account, and can lose permission to files on other volumes, especially backups.
Please clarify just what you're seeing, and whether you still have the old Mac. -
I have a iMAC(got it in less than 2 months ago), can I change the memory(upgrade it from 4 GB to 8GB) myself? I mean I need to open the screws and exchange the memory chips. Does it cancel the guarantee?
No, unless you break something or install the wrong RAM, new RAM is not covered by warranty/AppleCare of course.
https://support.apple.com/kb/HT3011
https://discussions.apple.com/docs/DOC-4291
Maybe you are looking for
-
How can i get rid of a black speck behind the screen?
Brand new, quad 2.8 GHZ Intel iMac. Beautiful. But has a black speck in the screen. How on earth would i get rid of this? I'm quite positive it's not on the screen. i've wiped it very firmly w/ the cloth provided. the thing is simply on the other sid
-
Move-ActiveMailboxDatabase Failed
Running Exchange 2010. I have a database copy between DB7 and DB8. I needed to reboot DB8 so I moved the active DB to DB7. It moved successfully. I rebooted the server with DB8. The server came back up and I tried to move the database back and got th
-
Javascript error when opening CS3 on pc..?
I cannot open ID on my CS3 package using my pc. The error appears twice in a box on screen stating 'JavaScript Error' 'Error Number 45' 'Error string :Object is Invalid' 'Line 387' also 'JavaScript Error' 'Error Number 45' 'Error String; Object is In
-
Does Siri get overwhelmed sometimes?
Twice now whan asked to make a call or send a message, she's said "I'm really sorry . . . but can't take any more requests Please try again later." Why?
-
I have exactly the problepm described on this URL : http://www.elliottsprehn.com/cfbugs/bugs/84976 I work with CF9.0 on windows 2008 , all 64bits. With that image I have this error : "An exception occurred while trying to read the image. Unsupported