I have recently had my MacBook Pro and iPad stolen so I have bought a new iPad, since syncing to my existing Apple ID account I keep getting another Apple ID popping up asking for the password. Does this mean that the owner of this appe ID have my stuff?
I have recently had my MacBook Pro and iPad stolen so I have bought a new iPad, since syncing to my existing Apple ID account I keep getting another Apple ID popping up asking for the password. Does this mean that the owner of this appe ID have my stuff?
You should change your AppleID password NOW. And if it says it was registered under another AppleID, the thief has probably done it.
Similar Messages
-
i have recently purchased a macbook pro and i gave my macbook to my wife, how can she recover the apps i bought and paid for so she can use the Pages, Numbers and Keynote
If you bought/paid for them in the Mac App Store, you would just need to sign in to the MAS with the Apple ID you used to purchase them, go to purchases, and click install.
As for the limited licensing that Bordy brought up, the TOS for the MAS states:
"Apps from the Mac App Store may be used on any Macs that you own or control for your personal use."
If you installed them from an iWork disc, just pop the disc back in and reinstall.
Regards,
Gnomish8 -
I have recently updated my MacBook Pro and now it crashes once my Desk Top completely loads
Has anyone had a similar problem after loading the latest operating updates?
After switching on the MacBook Pro and entering my password, all goes well until my desktop and icons load. Once this happens it switches itself off.
SOlutions Inc have backed up everything for me, reloaded the older version and all is fine. Then once they try and upload the latest version the whole issue starts again!! This is starting to cost me money!
The Genius Bar at Brighton can't get me in until Sunday 19th April, can anyone help with this issue? I am a novice so any ideas need to be pretty straight forward.
Many thanks
Bonsai Bill1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The test results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
When i try to sync my Iphone on my macbook pro I am told that I will lose any apps previously purchased while I was using a since crashed pc harddrive. I have authorized my macbook as a second computer but am not able to sync. Is there a way I can transfer my apps from my phone onto the macbook and then sync with my family members phones on the same account?
On the MacBook launch iTunes.
From the menu bar click Store / Authorize This Computer.
Now sync your iPhone.
Apple - Support - iPhone - Syncing -
Over the past two years I have produced three photo books with Apple. After losing all my photos in the burglary, is there any way I can get the photos back from Apple? It was distressing enough losing laptops and cameras, but it is ten times worse that they took back-up drives and everything with photos on.
Sorry to hear about your loss. What a terrible thing. Apple will hold the books/projects for no more than 40 days ro so.
Regards
TD -
I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says I am not connected to the internet and offers me a choice of nearby networks including mine and then asks for a password when I select it. Why does it do this with our new MacBooks (also with my son's brand new one) and not with the iPhone, iPad and older MacBook? They happily automatically connect to our network after entering the password just the once.
Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/ -
I have quickbooks software. I am traveling. I tried to send an invoice out, using the mac email (version 5.3) I can't send the mail out. I get a pop up asking for my password, I put the password in and it does not accept it. This is the 1st time I've had this problem.
slpmtnsWhilst it may not be your fault I am afraid it appears that your post is on a forum which is not the best for your OS. It will save the time of the unpaid volunteers here, and may resolve your issue faster, if you could examine the list below and see if there is a more appropriate forum to which you could direct your question.
OS X 10.9 Mavericks
OS X 10.8 Mountain Lion
OS X 10.7 Lion
OS X 10.6 Snow Leopard
OS X 10.5 Leopard
OS X 10.4 Tiger
OS X 10.3 and earlier
OS 9, OS 8 & System 7
OS X Technologies
OS X Server
iPad
iPhone
iPod
Other -
I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.
I have a POP Verizon e-mail address on my iMac and use Mac Mail v3.6. I recently purchased a MacBook Pro and would like to sync the e-mail so that they're the same on each machine. I've learned I must switch to IMAP...how is this done? Please dumb it down as best you can. I have this great fear that I'll lose all my e-mails in the process.
-
I have a 1st generation MacBook Pro and I recently downloaded OS X Maverick. My iTunes will not open because it says i need a 64 bit version. Already followed the promted instructions but no luck. Any suggestions??
Oh, you do have the C2D! That's great!
I'm no technical expert, I just like to help out whenever or wherever I can so... I don't know if this can help you, but let me tell you about how I got my Snow Leopard to run in 64 bit mode. When I got my (late 2008) iMac it was running in 32 bit mode under Tiger (2.4 GHz/Core 2 Duo). I eventually upgraded to Snow Leopard & it was running in 32 bit mode (by default) w/1 GB RAM.
Somewhere along the line, I happened to watch a YouTube Video that showed how to upgrade an iMac's RAM, so I ordered two - 2GB sticks of Crucial RAM and then - under the guidance of the 14 or 15 year-old young man who posted the video on YouTube; wearing a rather fashionable static-electricity-neutralizer-wrist-strap, I removed 1GB of RAM & plugged in the 4GBs of RAM. So - boom like that, it was like I bought a brand new machine.
It was over a year later when I stumbled across a way to boot Snow Leopard into 64 bit mode. Turns out that if you boot while holding down the 6 & 4 key combo (the ones above the QWERTY keys), then the machine runs in 64 bit mode. Go figure. Now my Snow Leopard and just about all of my applications - with the ironic exception of iTunes - runs in 64 bit. iTunes seems fine though; if there's a performance bottleneck, I really can't tell.
Well, that's about it..
I hope that something I've mentioned can help you achieve your overall goal.
Finally, it's hard to jump onto a train, a large cat, or a surfboard that's already moving. But don't be surprised when someone a fraction of your age shows you how to.
Best Regards,
mm~ -
I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2. I am awaiting the upgrade discs for snow leopard and then to Lion for the iMac but is there a way to access my photos until this arrives?
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
*AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware:<br>http://www.superantispyware.com/
*Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
Hi
I've have recently purchased a MacBook Pro 13. The system constantly gets frozen and unresponsive. No mouse control, neither do keys respond. Kindly help!! Thanx in advance.I've have recently purchased a MacBook Pro 13. The system constantly gets frozen and unresponsive. No mouse control, neither do keys respond.
Even when not much of background processes are actuve except the default ones.
Kindly help!!
Thanks in Advance -
hello.
I recently purchased a macbook pro, and is, and learn some things. and I have apple tv, and the question is can I send a movie from macbook and surf the Internet simultaneously without interrupting the movie?Welcome to Apple Support Communities
You can't do that in AirPlay Mirroring. AirPlay Mirroring can only mirror your MacBook's display, so you can't do one thing in your Mac's display and another in the TV.
This is a feature that will arrive in Mavericks. Read > http://www.apple.com/osx/preview -
I have a early 2008 macbook pro and i need a replacement bezel frame for the screen. Where do I find if it is a A1211?
http://www.welovemacs.com
-
I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?
Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in. That's about all you can do.
-
I have a Macbook Pro and an iPhone5. At one point, I received messages in sync on both devices. Now, I get some messages on the Macbook and others only on the iPhone. What happened?
Associate your mobile number with your Apple ID, if you haven't already done so.
Sign out of iMessage on the Mac:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
and on the iPhone:
Settings ▹ Messages ▹ Send & Receive ▹ Apple ID ▹ Sign out
Then, on the phone, tap
Use Your Apple ID for iMessage
Sign back into iMessage on both devices and test. If there's no change, you may have to wait for a change in network conditions.
Credit for this solution to ASC user SmittyLove and to Glenn Fleishman of tidbits.com.
Maybe you are looking for
-
How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX?
How do I get my old printer "HP Laserjet 4mv" to work on my newer Macs with OSX? There is no HP support for this old printer. I have tried to connect via ethernet (thru ethernet router), and it does not show up in printer preferences. The printer wor
-
Using MacBook adapter w/ MacBook Pro & visa versa
Hi, is there any risk in using a 60W adapter with a Pro? I have been told it will work but not charge the battery as fast. Howbout the other way- with an 85W on a MacBook? I don't like to do this sort of thing but then there is Ohm's Law.. And, for e
-
Sorting in Supplier check printing
Hi Guru's, I have developed the supplier check printing Template and its working fine. The client wants the report sorted by the check number. Iam not able to sort it <?sort:Checknumber?>by using this command. Need some help.Its Pretty critical
-
A frustrating number of crashes today in PSE 8. Error file below. Any ideas on what the probe is? (PSE8 on a Macbook running 10.6.8.) Help! ======================================== Process: Adobe Photoshop Elements [1894] Path: /Ap
-
Define DimensionAttribute type in the SSAS CUBE when using MDX function YTD()
hi there: I am trying to use YTD() in mdx and am aware that I need to first define dimDate to Time type and define each dimensionAttribute to appropriate type. HOwever, I am very confused by the large amount of selections in the Type dropdown list.