I have recently upgraded my ipad mini to iOS 6.0.2 and still have poor wifi performance. My 3rd generation ipad works great on the same network. I have done all the resets I can think of but nothing helps. I would not have purchased the mini had I known.
On the same wifi network, third generation ipad, iphone4s and MacBook Pro work just fine. The ipad mini often can not connect with the mail server and seems to hang a long time trying to open a web page. Had I known the mini had this kind of difficulty on wifi, I would have reconsidered my purchase. I have tried resetting the network and renewing the lease on the mini in addition. To completing the most current iOS upgrade. Still poor wifi performance. Unacceptable, in my opinion.
Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden
Similar Messages
-
MBA keyboard not responding. SMC didn't work.
If the USB keyboard still works after you log in, then the machine needs to be repaired.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
i prefer the ME interface to gmail and want to use push
Annoying glitches since IOS 8 + the update have rendered my iPad Air nearly unusable.....way too frustrating & annoying with many glitches plus some functions just go way too slow or even worse - don't kick in at all.....necessitating a reboot.....(especially with sending emails.....need to power down / power up to get emails to be sent way too often)......stopped by the apple store the other day.....they did their "thing" ( a reset + whatever)......told me I was now good to go & all problems should have been solved / fixed......was in a rush, so didn't really test the fix until later in the day.....same problems remained....no fix whatsoever.....
some videos in various "formats" won't play now......keyboard disappears while doing almost every "google" search.....the list of glitches goes on & on.....apple & I part ways now unless this is resolved soon.....will stop by the store one more time over the weekend & give them 1 more chance....& will "test" it in the store this time before believing whatever they say & leaving......also, never happened before - an incoming facetime call was never received the other day......my friend sent a screenshot of her history of calls to show that she tried when I said that I had not missed any calls...... -
Hi, I ahve a macbook Pro. Sometimes it tells me there are software updates but some of them i can't download because it wants me to enter an apple ID and its only giving me the choice to use my old ID with an old email address that no longer exists. I think its with itunes it does that.
If you have 'Find My iPad' activated on the iPad it will cause this problem. You will have to contact Support for help. Go to https://expresslane.apple.com ; select 'More Products and Services', then 'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Lost or forgotten Apple ID password' and click 'Continue'.
-
When I start Final Cut Pro X it don´t come further then to the blue-red window Final Cut Pro X Version 10.0 and underneath that the text Reading "Musik vid Siljan - dag 5" event. Please help me!!!!
It seems something is corrupt in that event. One thing to try is to temporarily move the folder for that event out of the Final Cut Events folder using the Finder. Then try to open FCP X. If it now opens, you know that event is corrupt. As to how to fix a corrupt event? Not sure there is a better way than reimporting the media as a new event.
-
i have error when i connect to itunes
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
I cant find my flashdrive on my macbook air and ive tried mounting going to preferences and utilities but nothing helps any tips?
What is the exact model MBA that you have and what specific flash drive are you referring to?
What the the current OSX that you have installed in your MBA?
Ciao. -
Solaris 8: Multiple primary interfaces connected to the same network
I have a machine with Solaris 8, and it has multiple interfaces that are connected to the same network which means they all have metric 0 (1 hop) to the default gateway.
assume:
e1000g0: 192.168.30.70
e1000g2: 192.168.30.72
e1000g4: 192.168.30.74
e1000g5: 192.168.30.76
gateway: 192.168.30.65 (Cisco Router)
However, it seems like despite the fact that they have a direct connection, they seem to be using e1000g0 to access the 192.168.30.0 network to get to the default gateway and then to anywhere else.
When I send a ping to say, 192.168.30.74 (IP of e1000g4) and capture packets on e1000g0, I see the "echo reply" messages going out of it as opposed to e1000g4 even though e1000g4 is the one receiving the "echo request". This should not happen and these should be completely independent as they should all be advertising a 1 hop to that network
The outputs from netstat -rn and ifconfig -a are shown in the picture on the link below
[http://img836.imageshack.us/img836/7308/ifconfignetstathiddenip.jpg]
This gets even more confusing when I go into the Cisco router and run the command: "show mac address-table" where only the MAC address of e1000g0 is shown for the switch port it's connected to, but not for the other interfaces which are connected to the switch. Yes, all ports are active (no shut) and are pingable.
Also, the odd thing is that ALL of these individual MACs show up in the router ARP table when the machine comes up, however after sending a ping to one of them, after a certain expiry or whatever period, the MACs disappear from the router ARP table and only the MAC for e1000g0 shows up. The arp table of the solaris machine however shows all the relevant MACs of each port of the router that it's physically connected to (This is actually a Cisco Switch with the advanced IP services imagine and L3 routing turned on)
Before anyone asks: The setting local-mac-address? setting does NOT exist in my machine and it never has, but it used to work fine. Also, from the ifconfig command, once can tell that all the MAC addresses are fine.
I need to somehow assign all these interfaces equal priority and make them understand that they're physically connected to the 192.168.30.0 network and there's no need to go through e1000g0 to get to it.
This is causing a lot of problems as eventually all traffic will end up going through the e1000g0 interface and that will become a bottle neck.
Please help Thanks in advanceOk thanks. That was a useful response.
I did think about the trunking software that is claimed to be available for Solaris 8, but it's only available if you've got paid support contract. Oracle came and ruined everything re: Sun support which is so expensive now.
The other confusion is, we never had that OR needed to configure trunking/link aggregation on this machine, so why now?
Lastly, by your explanation, this should be expected and is "normal" behaviour, which would mean that this machine was always doing this and I only just noticed it this time? I thought if you turn off ipv4 forwarding and router function in the machine, it's every interface for itself. But it's not doing that :(
So then the question is, Can I force it? I've tried a bunch of things by manipulating the tables and it seems to mess things up where nothing is getting through or it now shifts all the traffic to some other port make the problem no different
Is there a way to give equal weight to all interfaces for the traffic to go directly through them that is originating at those ports? -
iTunes sometimes splits songs from the same album into several albums, all sort fields appear to match. Any suggestions on how to return them to the proper album?
Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
N.B. Giving different things the same sort value (or indeed vice versa) tends to lead to trouble.
tt2 -
I have recently upgraded my iPad 2 to iOS 7 and I have lost 3 app icons. The apps still appear in settings, so I can't reinstall the app as they're already there. I've tried uninstalling and reinstalling via an iTunes sync, but it hasn't helped. The 3 apps are bbc iplayer, itv player and sky go.
Can anyone help please?Have you checked to see if the Apps have been placed in an App folder?
Try swiping down from the middle of the screen so the search bar appears. Type the name of the App and if the App appears it is indeed on your phone.
You could also try restarting your device by holding the power and home button until the Apple logo appears. -
I have recently upgraded my mac and ipad to IOS7 and find that Safari will not load onto my iPad. It just shuts down the app. Any ideas? I have been onto Mac who took me through a very long iPad robot, but the problem is still the same! Help appreciated
Do you mean that you did a soft-reset ?
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't fix it then try closing Safari via the iPad's multitaskingbar and see if it works when you re-open it :double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
After trying the above you could also do a soft-reset (even if this is what you've already done it might be worth trying after clearing Safari's cache and closing the app via the taskbar) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I have recently upgraded my iMac to 10.6.8 and now find that the upload photo to Facebook facility no longer works. I have reset Safari but this has not resolved the issue - any suggestions? I can click on the "upload photos/video" field and it takes me to Finder to select the photo - but on selecting the photo, the Finder screen disappears as normal but from then on nothing happens.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now empty the Safari cache.
Back to the menu bar, click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now click Develop from the menu bar. From the drop down menu click Empty Caches.
Quit and relaunch Safari then try Facebook.
If that doesn't help, it may be a Safari extension preventing you from uploading content to Facebook.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310). They're on the same network, but have differed IP addresses! The iPad IP is 192-168-1.126 and the printer is 192-168.1.133. That's the only difference I can see. Is there a way to fix this?
fyi:
you put periods between the numbers.
Each device needs a unique number.
for the 192.168.1 the right must number should vary. 192.168.1.x
the numbers you have look ok.
Power off all devices: wifi router, printer, ipad.. wait 10 minutes. poweron router ... wait power on printer wait then power on ipad.
cross fingers.
Robert -
Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
I have been able to get Airplay to work with my iPad 3 and 3rd Generation iPad TV, however there is no mirroring option when I hit the airplay icon - hence I can get audio, but no video.
iPad software: iOS 5.1.1
Apple TV software: 5.0.2 (4250)
Any thoughts as to what's going wrong?Are you enabling Airplay mirroring properly?
Double click the Home button, scroll to the leftmost screen and under Airplay look to turn mirroring On.
AC
Maybe you are looking for
-
Problems syncing new ipod to pc which is linked to another apple ID
Hi, I have just been setting up my daughter's ipod touch 4g. When I plug it in to my wife's pc and itunes is launched, the apps windows shows all the apps from my wife's iPhone. I have ensure itunes is signed in using my daughter's name, I've done
-
How do i remove blackberry from Login items in lion?
any idea? I'm trying to remove blackberry device manager from login item but the its checked and greyed out.
-
Search by External BP Number in CIC0
Hi, I have modified my HTML to add the new field BPEXT Now I want to do the search of BP by BPEXT but I don't know I to do it, as this field is not included in standard structures. I have already searched solutions to my problem in this forums but I
-
Round and round, Round and round
Bear with me: I have an iMac, and I am trying to install Windows 8.1 using Bootcamp. First attempt: after creating a partition Bootcamp crashes and I get a gray screen. Reboot and try again: will not allow a new partition, but can't see an existing o
-
Hi, i just started working with raptor but i like it quite well. Could replace toad soon in my opinion. I have one question or may be sugestion on the reports in the raptor. I like the idea of preparing reports in raptor very well - this is a brillia