I have removed some ADM templates from group policy but are still showing in RSOP
I removed some old custom ADM templates from group policy but they are still showing up when I run RSOP.MSC.
How do I get RSOP.msc not to show these old custom ADM templates? I'm not able to find what I'm looking for in my searches.
Hi,
Even you remove these custom ADM templates, the policy settings configured by these custom ADM templates still exist. We can try to import these ADM templates again then un-configure
the policy settings set by these custom ADM templates. After refreshing the policy settings, we can delete the custom ADM templates.
Best Regards,
Erin
Thanks. That almost works. When I import a new updated template with a different name but with some of the same settings, the old template shows up again.
Similar Messages
-
Can't Remove IE Maintenance settings from group policy
Dear Techies,
In group policy under IE Maintenance I configured
some settings like home page and proxy settings etc, now I removed all
settings from group policy, I cleared every thing but still I can see the IE settings under group policy.
1)automatically detect settings Disabled
2)automatic browser configuration Not configured.
Now
the problem is I am giving some proxy settings in IE manually when I
restarted the system proxy settings are getting empty and again I have to
give them.
Please tell the procedure to remove IE Maintenance completely from group policy.
can anybody please help me to solve this issue.
Thanks in advance for your valuable support.
Regards,
Phani Kumar .BHi,
If GPO settings are not removed completely or settings were not saved correctly, this issue may occur.
Let’s try to check if Registry settings was changed when changing IE proxy settings.
1. Open IE and change proxy settings. Click OK to apply.
2. Open "regedit", navigate to
HKCU\software\Microsoft\Windows\CurrentVersion\Internet Settings
In the right panel, are Proxy settings correct?
3. Log off and test. If the issue persists, please help to collect gpresult log.
Run "gpresult /v >>c:\gpresult.log", send gpresult.log to [email protected]
4. On DC, open GPO, navigate to Computer Configuration\Administrative Templates\System\Group Policy,
Double-click Internet Explorer Maintenance policy processing, Make sure it’s Note Configured or Disabled.
Navigate to IE Maintenance, right-click Internet Explorer Maintenance, choose Reset Browser settings. Delete all file in the following folder.
\\FQDN\Sysvol\FQDN\Policies\<GPOGUID>\User\Microsoft\IEAK
Note: Replace FQDN and <GPOGUID> accordingly.
5. On client, delete files in the following folder.
%windir%\System32\GroupPolicy\User\Microsoft\IEAK
Documents and Settings\<<username>>\Application Data\Microsoft\Internet Explorer\Custom Settings\Custom0\
Documents and Settings\<<username>>\Application Data\Microsoft\Network\Connections\pbk\Rasphone.pbk (for connection settings)
Thanks.
This posting is provided "AS IS" with no warranties, and confers no rights. -
How do I remove an iBook from the "Purchased" window of the iBooks store? I have already deleted it from the "Library" but it still shows up as a purchased book.
You can't currently delete items from your Purchased page, all you can do is hide (and unhide) them : http://support.apple.com/kb/HT4919
-
I have deleted email and photos from my device but icloud still says I don't have any storage
I have deleted emails and photos from my device but iCloud still says I don't have enough storage to download the latest iOS version
You'll have to delete more data from the device.
Go to Settings>General>Usage to see how much "Storage" you have available on the device. (Ignore storage on icloud, since that is not part of the equation.) -
Is there a way to hide apps from the app store?
I don't want my kids to see those "free" apps that nag you to spend real money and download their other apps!
I can hide them from "purchased apps", but they still show up when browsing for new apps!
Is there a way to hide them so that my kids will never see them when looking for new apps?Not other than parental oversight. On the computer you can implement Parental Controls on a separate user account that they would use. You can then block certain websites. But you cannot do that on the iPad.
You could change your iTunes account such that they cannot access it in order to buy or download apps. -
Items have been goods issued in R/3 but are still showing as Not GId in APO
2 products have been goods issued and the delivery is complete in R/3 but are still showing as Not Goods issued in APO.Please suggest.
Hi Usman,
Could you please let me know which table did you refer to find out the status of an order i.e., whether the order line has been Goods Issued or not?
Thanks,
Babu Kilari -
A song I purchased on iTunes has dropped out from my iPhone - but it still shows purchased in iTunes...but it won't let me download it again.
Any ideas?Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck! -
There is this tool bar, it says powered by wimba, it just showed up today. I have tried add block plus, I have googled and tried things suggested there, and yet I still have it.
Please help me completely remove this annoying tool barThe Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Or Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try some of the following programs to scan for malware:
* [http://www.malwarebytes.org/mbam.php MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://windows.microsoft.com/MSE Microsoft Security Essentials] (A good permanent anti-virus if you don't already have one)
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
i have my brother's library shared with mine through home sharing, but i hate having all of his songs show up in my library and he hates having my songs show up. we both turned off home sharing in the advanced tab and disconnected each others' libraries from our itunes but they won't go away!
Try Deauthorize This Computer... under iTunes menu Store.
-
So I updated my Ipod touch to the newest software on my pc laptop which is windows 7. The software update wiped all of my songs and apps off of my Ipod. This is not that big of a deal because the songs and apps are still in my library and apps folder in itunes on my computer. The problem is, when I go to sync all my songs and apps back onto my ipod the tracks and apps are not syncing. It's almost as if the computer thinks all the songs are still already on the ipod but they are not. What do I do here?
- Try resetting the iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next, restore from backup. -
I have several Ipods and an Ipad. We have all deleted music from our devices and the problem we are having is the song itself is gone which is what we wanted but the song title is still on the devices. It's grey and it won't play but I want to know how to remove the deleted songs completely off my devices.
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
I need to restart the computer in order to launch FF 3.6.8. Also, in Dreamweaver CS5, I have defined FF 3.6.8 as my default browser, but when I try to view a page in FF, I get the same message that FF is already running. Where else do I need to look to find hidden files that are causing this?
Did you uninstall the Firefox 4.0 beta version ?
If you did then did you remove the personal data or otherwise removed to Firefox profile folder ?
Make sure that you still have a (default) Firefox profile folder.<br />
See http://kb.mozillazine.org/Recovering_a_missing_profile -
Apple still take money from my account eventhough I removed my card details. How do I stop this.
Contact iTunes Customer Service
http://www.apple.com/support/itunes/contact.html
Changing Account Information
http://support.apple.com/kb/HT1918 -
Mail messages disappear from the Inbox, but are still in ~/Library/Mail
Folks,
I'm encountering a perplexing problem on my parent's eMac; any input would be very much appreciated...here's the story:
Over the weekend, I upgraded my Dad's 1.25GHz eMac G4 to Tiger (it had been running 10.3.9). The upgrade went smoothly, and all seemed well. I applied all the latest Apple Software Updates to get the eMac to 10.4.6, and once again, all seemed well. I performed the usual Disk Utility "permission fixing," as well, and nothing came up that seemed unusual. I did notice that I encountered the "spinning beach ball" a fair amount during routine operations, but I attributed this to the fact that the eMac only has 512MB of RAM (it's going to receive another 512 in a few days), and that I was just being impatient, given that I am accustomed to my own machine, which is a relatively snappy dual 2.5GHz G5 with the full complement of 8GB of RAM. A day or so later, Dad reported that the Mail app was not starting; upon clicking the Mail icon, it simply bounced several times, and then simply stopped bouncing. I looked at the crash logs and found that Mail could not locate a needed file/library located in /System/Library/Frameworks/SyncServices.framework. In addition, I noticed that the iCal app and the Address Book app were also crashing (the icons of each would bounce, just like Mail's, then stop, without the apps actually firing up). The crash logs revealed that those apps were also looking for this mysterious file, which apparently had somehow been misplaced/lost. I used the "Pacifist" program to reinstall the contents of that particular directory (using the Tiger install CD). Much to my relief, once that directory was reinstalled, the apps once again started up and worked normally. HOWEVER, I noticed some odd behavior with the Mail app. The first thing that became evident was that the Inbox did not show all the messages that had been there before. Looking under the ~/Library/Mail/POP-Dad's account/INBOX.mbox/Messages directory, however, it was clear that all the messages were indeed there (in the form of the individual .emlx files). They just did not seem to be displayed in the Inbox of the Mail app. I tried doing a "rebuild" of the mailbox, but this did not result in any additional messages being displayed. Any thoughts?
The other perplexing behavior is this: the Mail app on the eMac can send and receive mail, but, once you click on a newly-received (unread) message, and then go to another mail box (say, for example, the "Drafts" or "Sent" folders), and then return to the Inbox, the message that was just received is no longer displayed/listed in the Inbox. Once again, looking in the ~/Library/Mail/POP-Dad's account/INBOX.mbox/Messages directory reveals that the message IS there (again, in its own .emlx file), but is simply not being displayed in the Inbox. I can click on the individual .emlx files, and they open new windows in Mail, from which you can hit "reply" or "forward," as normal; it just won't display the actual message that was originally in the Inbox. Sent messages, however, seem to be saved/displayed normally.
I've searched through the Mail discussion forum, and while I've found discussions along generally similar lines, I have not located an entry dealing with these particular symptoms. As such, any input/suggestions would be greatly appreciated.
Thanks in advance for your time.
-JavierRegarding the missing package that you reinstalled with Pacifist, it would have been better to fix the problem by reinstalling the Mac OS X 10.4.6 Combo Update. Actually, you're going to have to do that anyway, as the package you installed came from an older version of Mac OS X and could now be out-of-sync with the rest of the system. Not only that, but if there was something amiss with that package, chances are that something else went awry as well, so you should really reinstall the latest Combo Update. Read the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the boot volume (not just permissions) before installing the update, and no applications should be running while installing it.
As to the missing messages, the conversion from Mail 1.x to Mail 2.0 is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
If you see a strangely named Messages-XXXXXX folder within any of the *.mbox folders in the Finder, that means the conversion didn't proceed as it should, so be careful about deleting the old files, as they may contain messages that didn't come through. Better just move them out of there if you wish.
I partially disagree with Allan (and with Ernie, who also has troubleshooted a lot of similar cases and believes the old files could still be troublesome after a successful conversion as well) in that I don't think the problem with Mail 2.0 is the presence of the old files, but rather that, as a result of the improper conversion, there is something wrong with Envelope Index and with some of the converted messages themselves. IMO, the old files shouldn't be a problem if the conversion worked properly. Mail should just ignore those files when it sees a proper Messages folder in the mailbox folder.
The reason you cannot see in Mail some messages for which an *.emlx file exists is precisely that there is something wrong with Envelope Index. Mail will simply ignore any *.emlx file for which a corresponding entry does not exist in Envelope Index. Actually, Mail doesn't look into the Messages folder at all when displaying the mailbox contents, it just loads whatever there is in Envelope Index. If that information is wrong, the information displayed by Mail will be wrong as well; it may refer to messages that no longer exist, ignore messages that do exist, display one message but load a different one when you open it, etc.
Re-creating Envelope Index without cleaning up the mailboxes first would probably fail and it could even make things worse, though. That's what makes troubleshooting these issues harder than it should be. -
All the photos gone are from my library, but are still in the data folders
when i scanned something onto my computer a few minutes ago and then went to import it into iphoto, i opened up iphoto and a message that said something about my thumbnails needing to be redone because of a new version of iphoto or something (i haven't done anything to itunes--updates, gotten a newer version--since i got the computer in 2006. so i don't know what that was about). i clicked okay thinking that my thumbnails would now show up because earlier they just showed up as a blank box. but then the only photo in my iphoto library was the image i'd just imported. all my albums were gone too. i went into my data folder on finder, and the photos are all still there. just not in iphoto. why is this? is there a way to get the photos back on without importing them again? importing would take forever seeing as there's more than 4,000 images.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD
Maybe you are looking for
-
I need help before I through my phone out the window. I tried updating my phone and have had nothing but problems. It is now in recovery mode and iTunes is telling me I need to restore it back to the factory setup. I do not want to restore my phone,
-
Solution for the Finance AR aging report by BW
Dear gurus, In our bw system , we want to realize the AR aging report . but there are some problems . for the partial pay logic in the R/3 , we want to combine the partial incoming payment line item with the customer invoice in t
-
Hi All I need to know which HBA card will support solaris 10.we have sunfire 1280 server, brocade silkworm 12000 and hitachi 9980 Regards RPS
-
I was wondering what the LabVIEW developers used to do networking in LabVIEW. I am trying to create an EndPoint using a Shared Library and send return that endpoint to LabVIEW as an integer that I can cast to a Network Reference. This seems to work o
-
Hi Guys, Please advise me as i need to install SCOM agent on all workgroup machine automatically and not through Copying certificate and all which is quite hectic process, your help will be Appreciated, Thanks Amit Singh