I have reset my i-pod to factory defaults.

My only problem is that I cannot enter my username and password to get into Wifi!!
Please help me with this problem.  Thank you.
Shawn Stopper

What happens when you try?
You can also
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.                        
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
For how to restore:                                                             
iTunes: Restoring iOS software

Similar Messages

  • I have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

    i have reset my macbook pro to factory reset the screen is now asking me to put in my details, do i have too as if i am showing it to someone they need to be able to see it working but does that not mean that my name will be on it. please help

    Use a alias, but you might have to use a zip code that matches the location used.
    Also if you click the right button there is a way to bypass the registration, like register later or something, Apple has it hidden. Also to bypass the internet connection to send the registration off.
    Never place your name on a Mac or PC, it's spread throughout the entire machine, in emails, on the network in plain sight etc.

  • I have an iPad that was setup on a laptop that has been reimaged.  The iPad then had a password put on it and my kid doesn't rememer the password.  Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default

    I have an iPad that was setup on a laptop that has been reimaged.  The iPad then had a password put on it and my kid who doesn't rememer the password.  Since I don't have the original laptop with iTunes installed I cannot reset the iPad to the factory default.  Any suggestions on how to reset to the iPad?
    Thank you

    Try recovery mode. I think this should work. You can read the instructions here.
    http://support.apple.com/kb/ht4097

  • Recently had to reset my computer back to factory default settings

    I recently had to reset my computer back to factory default settings due to a possible keylogger hidden somewhere on my computer. When I did this, I forgot to transfer all of my songs onto my iPod before I did it, which wiped all of my songs off of my computer. I recently re-installed iTunes and I need to know if there is a way to recover the songs I had purchased previously?
    Whenever I try to "Buy Song", it takes me to the receipt of the song, but won't download it. Any suggestions?

    have a look here: http://discussions.apple.com/thread.jspa?threadID=1305197

  • I tried to reset my nano to the factory default and it says that I only have 1.7 gb

    When I tried to sync my ipod to itunes it keeps giving me an error message and then I tried to reset it back to the factory, it says I have 5.5 gb used and 1.7gb left.

    Conatct AppleCare Account Security. Contact numbers here:
    http://support.apple.com/kb/HT5699?viewlocale=en_US

  • My daughters ipad mini is frozen and will not swipe.  I have reset and the restored to factory settings

    my daughter ipad mini is frozen.  it will not let me swipe.  I have rebooted and then restored to factory settings but I am still unable to swipe.
    She has had problems with this ipad in the past and told at the reading store, by a pretty rude guy that we needed to buy a new one as it kept switching off.  it is only 14 months old and I do not ant to buy a new one if it will only last for this short time.   it has been working pretty much ok for the last month since our trip to the store but now it has totally frozen
    please can someone help me as I can not afford to buy another

    If you have restored the device as new, not from a backup and it is still malfunctioning, then you have a hardware problem. The warranty on the device is one year, but if you take it to the Genius Bar of the nearest Apple Store or Authorized Apple Service provider and it is determined there is a hardware fault, then you may qualify for an out of warranty replacement, which is at a reduced price, depending on your location. http://www.apple.com/support/ipad/repair/other/

  • How do I reset an iPad 2 to factory defaults when I can't recall the Restriction passcode?

    I have tried all of the suggested reset methods and still cannot reset to factory defaults. Somehow I setup a restrictions passcode that I can't find or remember so I seem to bee stuck.
    Does anyone have a solution?

    The only option is to wipe the device clean and restore it to factory settings.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • How to reset a ISE device to factory default?

    Hello guys,
    I just started learn Cisco ISE (TrustSec 2.0), i have my company device which that set on pre-configured configuration from my company meant configured database password.
    So i want to ask that how can i reset ise device to factory default configuration.
    Plz give me answer as well as possible, thanks in advance.

    Sure...
    application reset-config Resets the Cisco ISE configuration to factory defaults.
    Sent from Cisco Technical Support iPhone App

  • How can I reset my Photosmart C4480 to factory default? It stops halfway into printing the page.

    My Photosmart C4480 printer only prints a couple of paragraphs and stop. I go to my iMAC's Preferences, open print and Fax and click "resume." It prints a couple of lines and stops again. I have entered the CD and reinstalled the printer, to no avail. Any way to reset the printer to factory default?

    Before you reset the hardware, are you able to successfully make a copy from the glass?
    If you can, this printer is NOT having a hardware issue, if it can't then I will look up the reset.  
    Trained on Mac and Windows for inkjet printers.
    **Although I work for HP, I do not represent them in these forums**
    If I've resolved your issue please mark as Accepted Solution so others can use my advice! ^.^

  • Reset button is broken.  Which pins do I short to reset my Airport Extreme to factory defaults?

    I'm working on a 4th Generation Airport Extreme A1354.  I do not know the password and I was not able to perform the software, hardware, or factory default reset procedures.  (I never got the fast blinking amber light.)
    I suspected a broken reset switch and took the gray cover off to find the reset button was indeed broken.  Upon slight maneuvering, the button fell off the board.
    I think I can perform a factory default reset by jumpering where the reset switch was.  Which pins do I short to perform the factory default procedure without the reset button working?
    Trying to upload pictures that show my issue.

    I don't often work on extreme.. mostly Time Capsule.. but the switch is surface mount.. no pins go through the board.. you will need to lift the board right out of the frame, (it all comes out in one piece and is fairly easy to do).. and you will need to short the two pins right at the switch .. but hopefully with it right out the switch itself will become accessible.

  • HP Elitebook 8460W - how do I reset speakers and microphone to factory defaults?

    I did something (can't remember what) as I was trying to get a better recording of a class; and now I get feedback / echo from the speakers and the microphone doesn't work unless I use a head set... 

    The only option is to wipe the device clean and restore it to factory settings.
    Follow the instructions in  iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137http://support.apple.com/kb/HT4137 to restore the device to factory settings.
    Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
     Cheers, Tom

  • After resetting my MAC to factory default how do I reinstall my Creative Suite 5?

    After having to reset my Macbook Pro to factory default, do I need a new product code to reinstall my Creative Suite 5?

    Yes. You have to erase the device in Settings>General>Reset>Erase all content and settings.
    iCloud: Restore your iOS device from iCloud - Support - Apple

  • Resetting to factory default?

    I have seriously messed up some settings in my server, I'd like to reset windows server to the factory default, I am using windows server 2008... I would just put the 2012 trial inside of it, but I cant get it to work, So I am going to stick with my 2008
    for now. What I am asking is how do I reset it to the default?

    Hello,
    there is no way to go to factory defaults instead of a fresh install.
    With Windows Server 2012 R2 you are able to do it
    https://technet.microsoft.com/en-us/library/jj593197.aspx
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • HT201401 Incoming calls do not ring on iPhone, only vibrate.  All settings are selected for ringtone to be audible, I have restarted phone, went back to factory settings, still no sound on incoming calls.

    Incoming calls are not heard, only vibrate.  I have reset the phone back to factory settings and still do not get any ring tone sounds for any incoming calls.  The phone only vibrates.  I have checked all setting including volume and do not get any sounds from the phone on incoming calls. 

    Check the Mute / Silent Switch on the side of the phone...
    iPhone User Guide

  • RVS4000 resets to factory defaults

    I just installed a new RVS4000 router (firmware V1.3.0.5), configured it to my LAN, saved the setting and created a configuration backup. 4 times now in less than a week I lost access to the internet only to find the router reset to factory defaults.
    I can restore from the backup, but a day or 2 later and it resets again.
    Any suggestions - or do you think it's a hardware problem and I should return it for replacement?

    Please give this a try. First you need to upgrade to the latest firmware version(1.3.2.0). After upgrading to the latest version of the software the next step is to reset the device back to factory defaults. Then after the reset to factory, load the device manually. Next step after loading manually is to save your config file. This should take care of the reset back to factory default issue. If this does not take care of the problem please call into the support center. The number to call is 1-866-606-1866. Also please if you have to call in let the support center engineer know the steps you have already taken.
    Thanks
    Quendale

Maybe you are looking for