I have restored my ipod nano 2nd generation but its still not working
i have reset my ipod and restored it but it is still not working. i have connected to itunes and it has loaded some music onto it but though the light comes on you cannot see anything else on the screen. any suggestions would be appreciated
It might be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
http://www.apple.com/support/ipod/service/prices/
Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity. A third party service will actually replace the damage part for a little less. Google "iPod screen repair" and you should get a number of results to work with.
B-rock
Similar Messages
-
My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!
See this article:
http://support.apple.com/kb/ht3964
Find the section that applies to your computer, and follow the instructions.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
HT4623 hello i have my phone unlocked by me network but its still not working
hello i have my phone unlocked by my network but its still not working
which iphone? carrier locked to ? carrier you are using now ? how did you unlock it ?
-
HELP MEEE!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have tried restoring an Ipod Nano 6th Generation but it seems to keep looping back and saying it is in recovery and needs restoring, can anyone help?
Try doing a level reformat of the iPod's flash storage instead to see if that kills the restore loop using the instructions in the article below.
http://www.methodshop.com/gadgets/ipodsupport/erase/
B-rock -
Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?
Seems no one care about us .no one replied till no@!!!!@ strange
-
my ipad mini is not syncing music onto in, my ipad has been replaced to see whether the issue is to do with the ipad but its still not working.
ive tried everything and ive been to the store which was when i was given a new ipad mini. i have a a windows PC please help thanksAre you attempting to sync music from your iTunes Music Library on your PC?
What options do you have set on the Music Tab for your iPad in iTunes?
What happens when you sync?
Any error messages? -
I want to share Microsoft word from my desktop mac to my laptop but every timeIi try and do it, it says that it can't open because it is not supported by the software. I have tried several times and updated it on the mac but its still not working. Any ideas?
You need to install Office on the computer from the installer DVD or disc image you purchased.
-
ipod nano touch screen is not responding to my touch and whenever i click on something it just shows up as a white box
Have you double check to make sure VoiceOver and other accessibility features have not been turned on? See this article for more information and assistance.
iPod nano (6th generation): How to use VoiceOver
B-rock -
Ipod nano (2nd generation) serial number is not being recognized
so i got a silver 2nd generation 4gd ipod nano and for some reason, everytime i try to go to register my product it says that the serial number is not found. i am then asked to type in the manufacture number or something. it then says that that is found, but the serial number is still not found. what's up???
http://www.apple.com/support/service/help/warrantycheck/
As mentioned by another poster, the article above directs users whose serial number is not recognized to call Apple. -
Can someone plz help
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
Hi, i have a ipod classic, it now wont turn on or do anything, i have charged it, toggled the HOLD button and tried all the suggested press and hold, but nothing. Ive tried conecting it to the computer via a USB cable again nothing, its not even showing on my Itunes account when thats turned on.
Any one got any ideas, TIMHave you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock -
please help me use my ipod touch. i just got it and im a little confused on how to use it. it keeps asking for a wifi connection even while im logged in on itunes
iPod touch User Guide (For iOS 5.1 Software)
Are you connected to wi-fi?
If not, then connect. -
I have an old ipod nano (2nd generation) with music on it from an old itunes account from a few years ago. I have a new itunes account now. How do I get the music (that I purchased) transferred into my new itunes library?
Hi sid1010,
Welcome to the Support Communities!
You can redownload music that you have purchased directly to your iTunes Library. Here's how:
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Cheers,
- Judy -
I have an ipod nano 2nd generation with a non responsive click wheel
I have an ipod nano 2nd generation with a non responsive click wheel. I have fully charged it tried resetting it and on two different computers with the latest iTunes I have restored it with the latest firmware then moved it to hold and off hold held in the menue button and select button for 10 seconds but all I get is a screen where I select the language but cant get any response from the scroll wheel.
The hold button is working (I see the lock icon go on and off) I have done the restore procedure and then reset many times but no good I am wondering if I should open it up and disconnect the battery for 30 seconds.
I would appreciate any advice thanks in advance. (This is my Daughters ipod mine is an 8 gig one.)You need a newer model iPod, a 4G or 5G. The 2G can only go to iOS 4.2.1
Maybe you are looking for
-
Upload XL file from FTP server
Hi All, Can anybady help me, how to upload Excel file from FTP server. Thanks Sri Edited by: srikanthn on Apr 14, 2010 6:31 PM
-
Downloaded ITunes 7.0.1 and now won't allow me to update purchased music
My last post was extremely confusing so I'm trying to make it a little clearer. I downloaded ITunes 7.0.1 last night and after I did that I updated my ipod. As soon as I tried to do that, I got an error message saying "some of the items in the itunes
-
I don't want my hard drive partitioned
I have an 80 gb hd that was partitioned into 2 separate 40 gb drives. I want to combine them back to their original state. I have everything backed up & am willing to erase the HDs but in the disk utility it will only allow me to erase each one separ
-
I am attempting to insert text nodes into an existing document (fragment as follows): <sender> <concat> <freetext supplied_at_runtime="no">The sender of this letter is:</freetext> <db_column colname="off_title"/> <d
-
Dear Experts, Can you please suggest how to add a csv(flat file) to send via email notification(to generic pass). I already generated a flat file which needs to be send. Regards, Jaya