I have set my preferences to not allow storage yet i constantly have to remove it..why?

i have set my global and website storage to not allow any storage at all yet over and over I am constantly having to remove storage from a few websites and no I am not allowing them to do it in any way that I know of...can this be fixed somehow?

If you're viewing Flash content, then you MUST allow some data to be stored (even as little as 10kb) or everything will constantly freeze and restart.
I've doen it for testing and it's unbearable to try and watch a video or animation with ALL storage blocked.
I'm curious. Is your hard drive so full that Flash storage is causing problems?

Similar Messages

I have set my preferences to not allow cookies but they show up anyway

Dispite the fact that I have set my preferences in safari to not accept cookies they load on anyway ???? What's the deal ?

If you're viewing Flash content, then you MUST allow some data to be stored (even as little as 10kb) or everything will constantly freeze and restart.
I've doen it for testing and it's unbearable to try and watch a video or animation with ALL storage blocked.
I'm curious. Is your hard drive so full that Flash storage is causing problems?

I keep getting kicked out of my iCloud and when i try and sign in on my computer system preferences it will not allow me to do so-What is happening and why can't I sign in?

Very frustrating....My system preferences will not allow me to sign into my icloud, but when I come on here and use my apple id and password it works...what is going on? and why do I always have this **** problem?

Hi there SamV88,
You may find the troubleshooting steps in the article below helpful.
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
-Griff W.

Set type COMM_PR_UNIT is not allowed for product type

Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa Rodríguez

Rosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish

Display preferences do not allow for turning off Apple TV

After turning on Apple TV it cannot be reset without rebooting the system. Display preferences will not allow unchecking of Apple TV. It reverts immediately from Off to Apple TV

Just unplug it. I keep mine unplugged except when I need to sync or am using the ATV to view/listen to whatever. Keeps em cool 95% of the time and saves energy. They boot fairly quickly.

I have an iPad that will not allow me to accept iCloud terms and conditions. It just says server not available. But on an annoyingly regular basis a pop up asks me to accept term and cond, I go to iCloud and try to but that is when it tells me it cannot c

I have an iPad that will not allow me to accept iCloud terms and conditions. It just says server not available. But on an annoyingly regular basis a pop up asks me to accept term and cond, I go to iCloud and try to but that is when it tells me it cannot connect to the server. Frustrating as I cannot get rid of the pop ups.

Thanks champion! Apple support is useless! Way too difficult to get anywhere with their "support"

I have set form fields as User required and yet the form still prints/save when empty.

I have set form fields as User required and yet the form still prints/save when empty. I also have an email button on the form but that works correctly by not allowing the user to email the form with the required fields empty.
What script do I need to additionally restrict both printing and saving if the required fields are empty?
You would think that just setting that option would restrict those functions the same as it does for the email button.
Please be specific with your response if you are gracious enough to offer one. I have been searching the forum all morning for the answer to this and I really didn't understand any of the solutions offered to others enough to use those in my own form.
The required fields are:
Social (social security number)
Name
Headquarters
Residence
The next question I have is if there is a way to make individual signature fields mandatory if they are digital signatures?
In other words, I don't want the individual to be able to email the form to the next person if he/she hasn't applied their digital signature.

Saving can always be done, even when mandatory fields are empty. This is by design. And that is correct. Suppose you have a big form and 2 people need to fill it out. How can you fill out a first part and then send it to the second person without saving.
Same for printing. Same for your signature fields.
What I would do, is to put a "watermark" on the form that you show on preSave and prePrint if the form is incomplete. Just a static text on your form. Then the user will see that they need to do more. Also, on preSave and prePrint, you can show a warning popup to tell the user about the missing fields. You can then still cancel their action if the user decides not to save/print anyway.

No system manager locations set, search application might not be ready yet

Hi,
I am just setting up a new SharePoint 2013 environment (Windows server 2008 R2 + SQL Server 2008 R2) and I am getting this error message in powershell when I try to save my new search topology: No system manager locations set, search application might
not be ready yet. The installation script used to install and create the search service originates from this link: http://www.toddklindt.com/blog/Lists/Posts/Post.aspx?ID=378 and I receive the error message after running $clone.Activate().
ULS is writing this:
05-29-2013 14:57:00.94 mssearch.exe (0x19C0) 0x1A68 SharePoint Server Search Crawler:Content Plugin cd11 Critical Content Plugin can not be initialized - list of CSS addresses is not set.
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration dkd5 High synchronizing search service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:08.27 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration eff0 High synchronizing search data access service instance 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.38 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajzc7 Medium Cleanup of Orphan Systems in server SR00667 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwve Medium Synchronizing legacy admin 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai4f1 High Unable to get systemmanagerlocation from db 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ai84s Medium Skipping legacy admin sync as there is no system manager location set 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration agwvc Medium Skipping Topology Synchronize.The active topology does not have any Components. 8f28209c-5d35-a0cc-7fad-bd7b088335ee
05-29-2013 14:56:09.46 OWSTIMER.EXE (0x09B0) 0x1304 SharePoint Server Search Administration ajnco Medium Cleaning up Orphan nodes in system : 7B4831 8f28209c-5d35-a0cc-7fad-bd7b088335ee
So basically all else is going fine before saving the clone. Application pool is created, search service and it´s proxy is created (the databases are also created in SQL). The clone is after this created and then the components are added.
I have tested with both March and April CU. I use separate accouns for search service, installation and so on. I have tested giving the search application pool account local admin right but didnt make any difference.
Some posts in Internet around this matter is pointing towards there might be 4 missing patches like here: http://blog.steigis.ch/sharepoint/sps2013/search-in-starting-state/ They are all installed on my server.
Search host controller service and SharePoint Server Search are started.
Before creating the service I ran this. I have done this on all my other installations of search to solve the problem with the host service is in "starting" state. Info taken from here: http://mmman.itgroove.net/2012/12/search-host-controller-service-in-starting-state-sharepoint-2013-8/
$acl = Get-Acl HKLM:\System\CurrentControlSet\Control\ComputerName
$person = [System.Security.Principal.NTAccount] "Users"
$access = [System.Security.AccessControl.RegistryRights]::FullControl
$inheritance = [System.Security.AccessControl.InheritanceFlags] "ContainerInherit, ObjectInherit"
$propagation = [System.Security.AccessControl.PropagationFlags]::None
$type = [System.Security.AccessControl.AccessControlType]::Allow
$rule = New-Object System.Security.AccessControl.RegistryAccessRule($person, $access, $inheritance, $propagation, $type)
$acl.AddAccessRule($rule)
Set-Acl HKLM:\System\CurrentControlSet\Control\ComputerName $acl
$sh = Get-SPServiceInstance | ? {$_.TypeName -eq "Search Host Controller Service"}
After this I do a server restart and continue with creating the search service and its components.
Any ideas?

I had exactly the same issue when setting up a new SharePoint 2013 environment (Windows Server 2012, SP2013 with PU March 2013 and CU April 2013, .NET 4.5). I have tried almost everything during the last weeks to configure the Search Service Applicatione,
e.g. create the service from GUI, create it from PowerShell, verify my search account had enough permissions, check for missing updates etc. etc. Same error no matter what I tried.
Using another SharePoint farm I went through a similar configuration of the Search Service Application. I used exactly the same script as I did on the first server and the setup completed without any issues. So why did the same features fail during the setup?
To find an answer I compared the two farms and the only thing I noticed that were different was the lack of .NET 3.5 on the application and WFE server in the first farm. I then enabled .NET 3.5 features and now the Search Service Application works as expected
I had no idea enabling .NET 3.5 features would solve the issue - I thought .NET 4.5 was backward compatible and SharePoint only requires .NET 4.5 according the
requirements?

Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?

Bought an ipad 2 for christmas but it won't connect to my wireless. My modem/router is an Arris 653 B eurospec DOCSIS. The wifi works on an unsecured network I have in the bldg but not my own network. Anyone have any suggestions?

I'm not familiar with your router but are there any buttons on the front or back of it because sometimes you need to pair the router in order for your PC, laptop, phone or iPad to connect wirelessly with it?
From the routers I have used there are normally two buttons on the front or back (apart from the power button), pressing one of them allows you a few minutes to enter the required password on your iPad. Best look at the instructions for the router.

My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

My wife has a new Ipad and Iphone with icloud. We also have a Imac that has not been upgraded yet that is somehow syncing with her ipad and screwing up the apps. Is there anyway to prevent this. Maybe it is thru mobilme?

I think iCloud isn't coming until this fall and not until iOS 5 is publicly available. Right now there is confusion because all this stuff is still in beta and things are under NDA and may still change.
I'd just set the 3GS up the same as currently. When iOS 5 is available in the fall (and I don't think Apple has specified beyond "fall"), before you update, there should be any number of guides to setting things up and how it will all work. http://macworld.com is a good place to look for such information.

I just purchased a ipad 2 and have not sync it yet. I have an old pc and would like to move the itunes library account to a newer pc that I have. Can I move the library to the ipad and sync ipods to the ipad and/or move the library to the new pc?

I just purchased a ipad 2 and have not sync it yet. I have an old pc and would like to move the itunes library account to a newer pc that I have. Can I move the library to the ipad and sync ipods to the ipad and/or move the library to the new pc?

Perhaps this web page will help: http://support.apple.com/kb/ht1229
But I must point out that leaving the iPhoto Library on the external is worth considering. Your internal drive would be better off without having to carry the photos.
When you booted with the external connected and you were asked for the library, did you try navigating to the Library in on the external drive?

I have some to open my note book on my ipad2., i have some to open my note book on my ipad2.

i have some to open my note book on my ipad2., i have some to open my note book on my ipad2.
please help

LUCAS SAMUEL wrote:
i have some problems to open my notes book on my ipad2. please help me
What problems? You need to give specifics. Also, now that you've marked the post solved, fewer people will look at it. You may want to a new thread. Explain exactly what you're trying to do, what happens when you try, what error messages your getting and what troubleshooting steps you've already taken.
Best of luck.

I have a message that says "not enough storage " this ipad cannot be backed up because there is not enough icloud storage available. My problem isd that I can not close this message so I cannot use the ipad. can anyone help?

i have a message that says "not enough storage space this ipad cannot be backed up because there is not enough cloud storage. The message will not close so I cannot use the ipad.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I have an Apple ID, but not an iCloud ID. I have a PC, windows 7. Icloud will not let me create an iCloud on my pc, do not have iPhone, iPad, etc. Help!

I have an Apple ID, but not an iCloud ID. I have a PC, windows 7. Icloud will not let me create an iCloud on my pc, do not have iPhone, iPad, etc. Help!

Isa Garduño wrote:
the only way to creat an icloud account is with a ipad, iphone or imac Apple computer.
As you already knew, no, you cannot create a new iCloud account from anything but the above devices.
http://support.apple.com/kb/HT4436

HT4356 I have cannon mx870 it's not listed as an available printer for air print. Why it's only three years old and it has wi fi

I have cannon mx870 it's not listed as an available printer for air print. Why it's only three years old and it has wi fi.

Probably because it pre-dates Airprint technology. The fact that it has wifi doesn't change anything if it isn't an Airprint-supported printer

I have set my preferences to not allow storage yet i constantly have to remove it..why?

Similar Messages

Maybe you are looking for