I have set up my HP air print printer to my ipad 4 but it keeps losing it. When I try and print it says no air printer found.
I Have set up my HP air printer to my IPad 4. It keeps losing it. I am trying to print and it says no air printer found. Once I get it set up again and then don't use it for a while it has gone.
Have you tried ....
Rebooting your router? Unplug it for about 30 seconds and then plug it back in again.
Turn the printer off and then turn it back on again.
Check for a firmware update for the printer.
Reset Network Settings on the iPad. Settings>General>Reset>Reset Network Settings.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Similar Messages
-
When i try and sync it says i do not have the access priveleges to do so ?
when i try and sync it says i do not have the access priveleges to do so ?
If your computer is a Mac use the Disk Utility and "Repair Permissions". If it's Windows I don't have any idea how to fix it.
-
Firefox not only disappears from my dock but also from my Applications folder. I tried to downl0ad it again today (5/19/2011), however, it says my system isn't compatible because I don't have an Intel processor. Any suggestions. I have problems with Safari and like to use Firefox but can't if it keeps disappearing and then Mozilla tells me that I can't install after I have already downloaded the application.
For an unofficial Firefox 4 compatible version that runs on Mac OS X 10.4.11 or Mac OS X 10.5.8 (PowerPC) you can look at:
* http://www.floodgap.com/software/tenfourfox/
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html -
Before you ask, i tried going through the third-party add-on document and opening it up in safemode did not fix it. Also, I am running it as administrator and that is not helping either.
I DID IT! I FIXED IT, FINALLY!!! At least it worked for me. Here's what I did: from Control Panel/Programs/Programs and Features/Uninstall or Change Program, I right-clicked on iTunes and selected Repair. After that ran and completed, I went to Computer/Local Disk (C:)/Program Files. From the list, I right-clicked on iTunes and selected “Run as Administrator.” After that I tried to purchase music from iTunes, and it worked! I hope this makes sense and works for you. Good luck!
-
when I try and send emails from any of the 3 email accounts on my iphone 3 it will send to some accounts but not to each other message says " server has recjected the recipients email"
help please??Go into Settings>Mail, Contacts, Calendars>your account>Outgoing mail Server SMTP>Primary Server then turn Server ON and fill in both User Name + Password under Outgoing Mail Server.
-
I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite. When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error. I am running Mac OS 10.10.1. This only started happening when I installed the update of Adobe Acrobat.
Hi MEW1,
Is the printer connected wirelessly or wired?
Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
Close Acrobat and then relaunch it and see if it helps you while you do scanning.
Regards,
Rave -
I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X -
When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
Please help!It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.
-
Installed a new router. Installed Lion. Have an Epson Workforce 600 multi function printer. Two problems.
1. I cannot get Lion to recognize that the Epson is a multi function printer. There is no scan option on the "print/Scan" popup window.
2. When I try and use the epson scan utility I get: POWER PC APPLICATIONS ARE NOT LONGER SUPPORTED.
I have tried EPSON support with no real luck as they say it is Apple upgrades that are the problem.
Apple support was quite rude..said it was not their problem and that I should call epson. Told the I did but it made no difference just got the same reply.
Have no idea what to do.....seems I cannot find out which multi-function printers Lion supports.daolbuzzard1 wrote:
Epson Workforce 600 multi function printer
Not to give you another run around, but you need new printer drivers from Epson for your printer so it works in Lion.
Now it could be that they are working on it, or that they could have decided not to provide new drivers in order for you to force upgrade.
The only thing a user can do is decide very carefully BEFORE upgrading to a newer Apple operating system, make sure that all their current hardware and software works and make a decision for themselves.
Since you upgraded to Lion, you can go back to Snow Leopard and your PPC software will work.
Do you need instructions? -
I have a HP Officejet Pro 8500A and I had no problems printing to it from my Mac or Macbook pro. The macbook is wifi and the Mac is cable, I have recently had the printer replaced with an exact model. Since doing that I can only print from the macbook pro, when I try and print from teh mac it doesnt see the pages. It could be a 10 page document and it will just show two blank pages. I have googled the question and have tried deleating the printer and reinstalling without any luck. When I got the new printer I insalled all the latest drivers thats the only thing different.
Could you please help
MichelleRight click the printer in System Prefences - Print & Scan and use Reset Printing System... and then reinstall the printer, should take less than 5 minutes. Here is a photo showing how to Reset Printing System....
-
I have set up a Time Warner email account in Mac Mail but can't send email with this account because the Road Runner SMPT server is "offline." How can this be resolved?
Is this any help?
http://www.timewarnercable.com/en/residential-home/support/faqs/faqs-internet/e- mailacco/how-do-i-set-up-my-twc-mail-for-mac-osx.html
The receiving email ports are:
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
Outgoing ports are...
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users. -
I have set up iCloud control panel 3.1 for Windows 7 but when I add contacts on my Windows 7 desktop it is not updating to my iPhone 5 and the same holds true with my Calendar. Any suggestions? Thanks
The version that came with Microsoft Office Home and Business 2010 and says Version 14.0.7106.5003 (32 Bit) and the e-mail I have set up as POP / SMTP. Thanks for your reply.
-
My macbook pro's screen constantly goes dim. I have set the energy saver settings for battery to 7 mins but it goes dim even if the period of inactivity is less than 7 mins. Please help. MBP 13" OSX 10.6.8 (2011)
Doesn't sound like it. It sounds like you're being logged-off.
Does your Mac go through the complete Restart cycle -- black screen, gray and/or blue screen momentarily, startup chime, etc?
If you're not sure, do a Restart just to watch the process; the next time the problem occurs, see if it's the same.
You need to know which it is, as these will have very different causes, and different places to look for a solution. -
I am trying to set up my daughter's iTouch. I am connected to our Wi-Fi, and have confirmed this in Settings, but when we try and open any webpage we receive the message that page cannot be opened because not connected to the Internet. I have already re-set the iPod, have shut-down and restarted, and told the iPod to "Forget Network". please help - i am going bananas!
Encryption wouldn't matter except for Wifi.
While 10.2 might help, there's not much you can do on the Internet these days with less than 10.4.11
Tiger Requirements...
To use Mac OS X 10.4 Tiger, your Macintosh needs:
* A PowerPC G3, G4, or G5 processor
* Built-in FireWire
* At least 256 MB of RAM (I recommend 1GB minimum)
* DVD drive (DVD-ROM), Combo (CD-RW/DVD-ROM) or SuperDrive (DVD-R) for installation
* At least 3 GB of free disk space; 4 GB if you install the XCode 2 Developer Tools (I recommend 20GB minimum)
http://support.apple.com/kb/HT1514
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+tiger+retail+10.4
See Tom's, (Texas Mac Man), great info on where/how to find/get Tiger...
https://discussions.apple.com/message/15305521#15305521
Or Ali Brown's great info on where/how to find/get Tiger...
http://discussions.apple.com/thread.jspa?messageID=10381710#10381710
As far as Memory, that's sort of easy, find your eMac here...
http://eshop.macsales.com/MyOWC/Models.cfm?Family=emac&sType=Memory
As far as Hard Drive, it's not easy to replace the Internal drive, I'd maybe suggest an external Firewire drive to boot from...
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7500G16/ -
I have subscribed to US Holidays calendar in iCal. These holidays show up in iCal on my iPhone and on my iPad, but not on iMac. When I "get info" for that calendar, "location" is set to iCloud.
I found this link (trash Calendar Cache and iCal.plist), and it solved my problem. https://discussions.apple.com/message/11084987?searchText=ical%20us%20holidays%2 0not%20showing%20on%20imac#11084987
-
How can I get to use my phone? When I try and dial out it says: 'You have not been given access to this service'
Have you chacked with your carrier. The message you are getting seems to relate to a carrier issue and not something to do with the phone itself
Maybe you are looking for
-
AssignedTo showing multiple times on report
I was tasked with creating some reports from Service Manager using the cubes. My boss wanted a report that showed all active tickets, showing from high to low the analyst, then the category, then the user. I used the following Fields: IncidentStat
-
Delivery schedule in purchase requisition should be copied to RFQ
Hi I had a requirement to maintain delivery schedule in purchase requisition which should be copied to RFQ. Since standard SAP is not supporting this feature, we maintained delivery schedule for each line item of PR in a custom screen/development. No
-
Options for Client_host
Hi, Do anyone have a link which can show what are all the parameters (or options) that can be used along with client_host and webutil_host Regards
-
When you can use Airplay without the need to connect to a wireless router?
My question / request is, when you can use Airplay without the need to connect to a wireless router? Able to connect your iphone / ipod touch / ipad to your Apple TV directly without a wifi router, something like a "Airplay Direct"
-
ASM , TTS, and dataguard
I am going to be migrating from Itanium (hpux) san using serviceguard and VCS, to AMD (x86_64) with ASM, I know the endian type change, and I have gone through a test of converting the database and bringing the datafiles into ASM, and importing the m