I have set up my time capsule but can not see it in finder

I have setup my time capsule, I can see it on the network and have done an initial backup, I can see it under shared devices in finder but when I open it I cannot see any files in the folder

If you have backed up your Mac using Time Machine to the Time Capsule, you would not use the Finder to see the files on the Time Capsule.
If you want to see the backups, click on the Time Machine "clock" icon on the dock at the bottom of the screen and wait a few minutes for everything to load.
Use the scale at the right of the screen to move from different recent backup times or dates. Select the time that you want and use the Finder like interface to navigate to locate a file or folder.
More info on Time Machine is available in this Apple support document:
http://support.apple.com/kb/HT1427

Similar Messages

Wifi Working With New Time Capsule But Can't See It To Configure Settings?

I had an airport extreme but recenlty purchased an airport time capsule. When I initially plugged it in, by airport utlity saw it and it asked me to set up a password. But then I noticed there was no internet signal getting to the time capsule. We wound up replacing the DSL Router and now the internet is up and running. But now when I open the airport icon, the time capsule doesn't even show up. When I open the airport utility through finder it shows the time capsule but blocks me from accessing anything. So I can't go into any set up configuration for changing passwords, setting up guest network or setting up the back up to the time capsule. I don't see any downloads for a new utility for the time capsule, so I'm assuming it's the same as for the airport extreme? What do I need to do in order to be able access the configuration areas?

Reboot the TC.. it is hard for poor OSX to find it.
No luck.
Just press reset and start again.
Do a new clean setup.. please use all SMB names this time, short, no spaces and pure alphaumeric.
Ensure ipv6 is set to link-local on both the wireless and ethernet if you use it. Wireless is essential even if you use ethernet you cannot do setups without wireless.
Still got trouble??
What is the OS on the computer and therefore version of the airport utility.. you will have huge problems with Mavericks.. as that is its nature.

I had an i Tunes account with $6 remaining on it. I cannot locate it. I have started another i Tunes account but can not see the original account

loaded songs on my computer and then purchased several songs with six dollars remaining. i can not find that original account.

Sorry, but what do you mean by "can't find that original account"? What happens when you log into the iTunes Store using that old account ID and password?

Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.

Use migration assistant to move your files. http://support.apple.com/kb/HT4889

Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

Hello, I have two questions on time capsule I can only have it on my external hd files and free up my internal memory to my mac I can use an external hard drive, in my case a lacie rugged as shared memory for my two computers

I have a mackbook pro and an iMac if I buy a time capsule 2tb airport, I can use it with time machine and what would be the best way to use it.
There is no particular setup required for TM.. both computers will create their own backup sparsebundle which is like a virtual disk.. Pondini explains the whole thing if you read the reference I gave you.
and how to use time capsule airport whit other external hd to use my old lacie airport with the new time capsule
Up to you.. you can plug the external drive into the TC and enjoy really slow file transfers or you can plug it into your computer and use it as external drive.. which is faster than the TC.. and TM can include it in the backup.
Again everything is explained in the reference.. you are not reading it.

TS2756 I can not see personnel hot spot in setting cellular, I have restore iPhone 5 twice but can not see this in china, china telecome nano SIM card.

In iPhone 5 iOS 6.0.2 can not see option in setting for setting>>cellular >> ? How to enable hot spot icon to choose. Cellular service provider china mobile , it's Internet and call service work well, iPhone have restore twice but can not see hot spot option.

Personal Hotspot is provided by the carrier, but not every carrier offers this service. Contact your carrier to make sure that you can get this option.

HT3275 how can i retrieve information from time machine if my computer has less storage capacity? How can I access data that is on my time machine but can not be copied to a computer with less storage capacity? I used to have 180 GB, now I have 128 GB.

how can i retrieve information from time machine if my computer has less storage capacity? How can I access data that is on my time machine but can not be copied to a computer with less storage capacity? I used to have 180 GB, now I have 128 GB.

Plug an external drive into the computer and use that to expand data onto.
http://pondini.org/TM/16.html

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Trying to install MS Office 2011 for Mac SP 2 on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Trying to install MS Office 2011 for Mac SP 2 (14.2.0) on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Thanks Kurt! I had tried all that and had tried closing both programmes from the application monitor, but SyncServices Agent refused to close. I tried closing Launchd which is their mother application, but that just caused the screen go go blank. In the end the two programmes let themselves be closed next time I tried the installation process so all was well. Thanks for your help!

How do I log into my iCloud account. I have iCloud installed on my iPad but can not figure out how to log into my iCloud account to restore a message

How do I log into my iCloud account. I have iCloud installed on my iPad but can not figure out how to log into my iCloud account to restore a message

Settings / iCloud on the iOS device to view your settings and options.
Storage & Backup / iCloud Backup is how you restore the device with your last backup.

We have one iPhone3s w the lates ios6. have selected iCloud backup for photos but do not see any photos when I log on to iCloud

we have one iPhone3gs w the lates ios6. have selected iCloud backup for photos but do not see any photos when I log on to iCloud. How can I get all my photos from the iPhone3GS to iCloud?

You can't see inside a backup file on icloud, thus you can't view your photos at icloud.com.

Would like to move iPod touch files to my new Windows 8 computer -- but can not see hidden files

Would like to move iPod touch files to my new Windows 8 computer -- read on how to do this, but this involves being able to see the hidden fiels -- but can not see hidden files...any suggestions. Would like to transfer these files from iPod Touch to new laptop without software -- is that possible -- if not can anyone recommend a good free software to use?

There is no way to do so without software. I recently had a similiar task and was suggested to use iExplorer. It worked like a charm.
Refer to this page for iExplorer
Here is the page I was helped with on this task for reference: Export Songs
Hope this helps!
PSkilton

TS1368 i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

i try to charge my ipod 4th generation but can not see the battary been charge and also cannot connect to itunes on my computer

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Hello because iphoto photos that have resolution of 4896 x 3672 I can not see bigger I get a warning and I can not edit

Hello because iphoto photos that have resolution of 4896 x 3672 I can not see bigger I get a warning and I can not edit tank you please i need help

Where did you get these images? A Canon 5D Mk III hass images that size, and no one has complained bout this issue.

Extracted Time Capsule Disk – Can't See Old Backups in Time Machine UI

Hello,
I was one of the unfortunate souls that purchased a Time Capsule in March of 2008, only to have its power supply die last month. Instead of buying a new one, I decided to take out the hard drive and attach it to an Airport Extreme.
The first few steps went fine: opened the TC, got the drive out, put it in a new case and hooked it up. Once I had it mounted, I told Time Machine to do a backup. And it did. And it was merely an incremental one. I was optimistic.
However, now when I "enter the Time Machine," I can only see the latest state ("Today/Now").
I'm wondering if anyone has an experience successfully extracting a TC drive, or if anyone has encountered my specific problem before. The fact that the backup action recognized the existing backups has me hopeful that there's simply some arcane preference somewhere that will make the Time Machine UI recognize everything properly. After all, the point of extracting the drive was so that I didn't have to start over.
Thanks!

Ok, immediately after posting I read Pondini's "Time Machine - TROUBLESHOOTING" thread (http://discussions.apple.com/thread.jspa?threadID=2057525) and found a solution in E2:
Also, sometimes TM will start a new "sequence" of backups, as if they were from a different Mac.
To see these "other" backups, you need the (badly named) Browse Other Time Machine Disks option. It's available by holding down the Option key while selecting the TM icon in your Menubar, or by control-clicking (right-clicking) the TM icon in your Dock.
You'll see a selection screen showing all the disks/partitions that have TM backups on them. Select the one you want, and you'll be taken to the normal TM "Star Wars" interface, where you should see all the backups on that disk/partition.
In my case, there was only the one disk showing, but when i selected it, all of my backups were visible.
I'm not going to mark this as "Answered" yet, because the regular "Enter Time Machine" menu option still does not work, as described above. But at least now I have a workaround to access the backups.

I have set up my time capsule but can not see it in finder

Similar Messages

Maybe you are looking for