I have several problems with my MBP 2012 13"

So I have several problems with my MBP 2012 13", and apparently according to Apple Store guys there is nothing wrong in their system checking devices they use. I list the problems briefly:
- After connecting USB devices laptop gets stuck for up to 30 seconds
- Clicking on WIFI toggle in finder gets Finder stuck
- Spotlight gets Finder stuck for 10 seconds
- Sometimes apps closes without reason
- Some desktops randomly becomes "unreachable" (I select it and it automatically switches to the one on the right)
- Facetime sometimes doesnt activate camera
- Trash bin takes forecer to get rid of files (once one hour for 200MB)
- Fan works at full speed randomly
- Screen becomes dark by itelf and computer goes to sleep, making impossible for me to wake him up. I have to open and close lid several times and press multiple times the power button.
I showed Apple Store guys the finder problems and the USB ones but they connected their things and said there is no problem. Laptop was bought new on August 2012.
What I am supposed to do?
Thanks

when I hold on the menu button it doesn't fade anymore, like it used to. It just goes to the previous menu
If you are talking about the backlight, I think this was changed by Apple in one of the recent updates, so the only way to change it back would be to install an earlier version of the iPod software. I don'tknow why your albums are not updating, but often a Reset and/or Restore will fix problems like that.

Similar Messages

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution?

Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.

Skizofrenias wrote:
Since I upgrade my iphone 3gs to ios 5.1, I have several problems with network and wi-fi, any solution? (No jailbreak)
Most of the time the iphone cannot reach any network and when it can, there is no data transfer, I can only make calls and sms.
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi or Bluetooth settings grayed out or dim

Since I installed Mountain Lion on my new MacBook Pro Retina (august 9) I have severely problems with Safari / Internet / loading webpages. Have had Apple Support

Restarted the MacBook ... Same problems!!! Even worse now!!! PLEASE APPLE ... solve the problems with Mountain Lion!!!

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
Oh, and try the Safari forum instead.
https://discussions.apple.com/community/mac_os/safari
You are talking to end users, not "Apple"
Go back to :Lion maybe until Moutain Lion has had more time to get optimized and ironed out.

I have several problems with Airplay since iOS8.

I have an iPhone 6, iPad Air, AppleTV and a Sony airplay speaker. Since iOS 8 none of the combinations is working fine.
iPhone - AppleTV: music stops after 1 second
iPhone - Sony: connects, but not playing. After rechoosing the internal iPhone speaker music doesn't play either
iPad - AppleTV: music stops after 1 second
iPad - Sony: music is playing but stops when the display turns off
Any idea how I could fix this?

Hey mizant,
Thanks for the question. I understand that you are experiencing issues with AirPlay. The following resource may provide a solution:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch
http://support.apple.com/kb/ts4215
Thanks,
Matt M.

I have several problems with my ipod

The first thing is that when I hold on the menu button it doesn't fade anymore, like it used to. It just goes to the previous menu.
I also put full albums on itunes and when i update my ipod only 1 or 2 songs are put on my ipod from select albums. Anyone who has any suggestions, please help.

when I hold on the menu button it doesn't fade anymore, like it used to. It just goes to the previous menu
If you are talking about the backlight, I think this was changed by Apple in one of the recent updates, so the only way to change it back would be to install an earlier version of the iPod software. I don'tknow why your albums are not updating, but often a Reset and/or Restore will fix problems like that.

Problem with windows server 2012

i have a problem with window server 2012 , i remove some feature in server manager and it restart .but when i log in into my account it shows a black screen with cmd window with this massage "C:\users\Administrator>." please
help me. i dont know whats happend and i cannt work with this
thanks a lot

You may follow this link to get it solved
http://www.jon-tupitza.com/2014/02/18/enabling-the-windows-server-2012-r2-gui/
http://www.arabitpro.com

Severe problems with System Preferences after updating to OS 10.8

After updating my MacBook Pro (2Ghz Intel Core i7) from MacOS 10.6.8 to 10.8 I have severe problems with accesing System Preferences.
For each of the topics (XXX) listed below, I get the following message, when selectiong the topic:
"To use the XXX preference pane, System preferences needs to quit and reopen"/OK/Cancel
After quiting and reopening the same message appears again...
Topics (XXX):
Desktop & Screen saver
Security & Privacy
Notification
iCloud
Mail, Contacs & Calendars
Date & Time
Software Update
Dictation & Speech
Startup Disk
After updating to Mac OS 10.8.1 the problem persist.... Any suggestions or fixes?
Best Regards
Carsten

1. Open Disk Utility and repair permissions
2. Open Finder, press Option key, select Go > Library, open Preferences folder and delete com.apple.systempreferences.plist
3. Go to System Preferences > Users and Groups, create an user and check if the issue appears
4. Backup the data and press Command and R keys in boot. Open Disk Utility, select the drive, erase it and install Mountain Lion. When Mountain Lion asks for the backup, only move your user files

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

I have two problems with my 2012 13" MacBook Pro. 1. Gray screen shows at startup 2. Randomly disconnects from network. Any help will be greatly appreciated.

I have two problems with my 2012 13” MacBook Pro.
Gray screen shows at startup
Randomly disconnects from network.
Any help will be greatly appreciated.

First, open Terminal in your Utilities folder and paste this into the prompt line:
sudo update_dyld_shared_cache
Press RETURN. You will be prompted to enter your admin password which will not be echoed to the screen. Press RETURN again.
Next, boot the computer into Safe Mode.
Next, do the following:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work. What should I do

I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?

Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora

? I have a problem with the cloud app. i have downloaded it several times and have no problem. when it runs it then opens up but stays blank so i cant see my apps or download any HELP

? I have a problem with the cloud app. i have downloaded it several times and have no problem. when it runs it then opens up but stays blank so i cant see my apps or download any HELP

>opens up but stays blank
BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
-and step by step http://forums.adobe.com/thread/1440508?tstart=0
-and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

I have a problem with the battery and my iPhone 4S is restarting all the time. The phone was bought in June 2012 in LA. What can I do?

I have a problem with the battery and my iPhone 4S is restarting all the time. The phone was bought in June 2012 in LA. What can I do?

Since your iPhone is still under the one year warranty contact Apple Support or visit an Apple store to get a replacement.
Apple Support - http://support.apple.com/kb/HE57

HT6114 i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version.

i have a problem with notification of service battery since i installed mavericks. My macbook air is 2012 version. Any solution?

This from the crash log
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/Accounts.framework/Versions/A/Accounts
Referenced from: /System/Library/StagedFrameworks/Safari/Safari.framework/Safari
indicates there is a missing library on your system. What problems were you having before that caused you to delete Safari? How did you delete it?
You're best bet in this case is to re-install the OS. While doing a re-install will not normally harm your user data having a good working backup in cases like this is essential.

[SOLVED] Several problems with PulseAudio under Xfce4

So, yesterday I sat down to set up pulseaudio on my machine (I want to try and use it for my 'networked-audio system' of the future).
I was aware of the fact that pulseaudio does have several problems. particularly with ALSA-compatibility, but I was ready to give it a shot anyway and hope for the best.
Of course that did not happen...
I installed everything (including packages for backward compatibility with ALSA) and while sound still works (what a relief), I have several problems now:
1. Pulseaudio does NOT save it's volume levels - Volume levels for Pulseaudio are gone after next reboot, I was trying to look into this, but found no workable solution.
2. Strange behaviour of apps when changing volume - This is REALLY annoying.
When I am in a music app for example (e.g. Banshee) and am trying to increase/decrease volume, the current sound (song) will 'mute' when I am moving the slider and only 'resume' after I release it.
Any ideas are much appreciated,
Thanks,
SOLVED: It seems that all my alsa channels were automatically muted when pulseaudio was first enabled.
Strange, Is this because pulseaudio wants you not to use alsa or something? :-)
Last edited by MatejLach (2012-09-02 19:30:45)

vacant wrote:
I'm using just alsa now but when I used pulseaudio I used "pacmd" to set suitable volumes. Something like
pacmd set-default-volume (and then volumes in the range 0-65000?)
anyway, "pacmd info" will have the correct command.
I was not aware of this, very useful - Thank you.
Last edited by MatejLach (2012-09-02 19:31:53)

Chrome versions 21-26 show severe problems with flash deep links

Dear Madam or Sir,
New Chrome versions (at least versions 21-26) produce severe problems with Adobe Flash concerning deep links.
You will find test cases and detailed information on this subject here:
http://www.in-tanz.de/test-chrome/test.php
Since August 2012 all new versions starting from version 21 to 26 (at least 32-bit Windows) do no longer support for example deep links into Flash. I.e. links like:
poly-9.php#two
It does not matter, what deep link you want to jump to (two, three, four etc.), Chrome always starts with „one“ / at the beginning of the Flash-animation.
Like all other browsers (I successfully tested: Opera, Safari, Firefox, Internet-Explorer) Chrome should jump directly to the deep link #two, #three, etc.
It does not matter which flash player I have been using over the last 9 months (at the time 11.6.602.180).
This is a major problem as only my website contains more than 14,000 Flash files with over 100,000 deep links.
In fact, I reported the bug (first noticed with Chrome 21) to Google beginning October 2012 (see bug reports on my page http://code.google.com/p/chromium/issues/detail?id=154494). But recently, I got the feeling, that there seems to be little interest in solving this problem. Actually, after I had informed Google about it, they even rolled out new versions of Chrome containing the bugs, instead of repairing it.
Do you know any work around or can you offer any help?
Kind regards,
in-tanz

Chrome uses a proprietary build of the plug-in called "PepperFlash" because it's a PPAPI plug-in where the ActiveX and standard plug-in are NPAPI. That may have something to do with it.

I have several problems with my MBP 2012 13"

Similar Messages

Maybe you are looking for