I have signal problems, cant do calls or calls stops in the midle.what to do?

i cant do calls sometimes. some other times displays the message 'no sim' . pleese help

It is a software issue because I didn't have the problem with iOS5 and like myself others are saying they had it after installing iOS 5.0.1. There is no doubt however that a very small minority of people will have hardware faults though, there always are on the production line but in this case all evidence points to firmware 5.0.1.
And Apple has said nothing about it, the media have said nothing about it. They mentioned the Battery problems though because people actually used the Apple Care and Apple had to replace their phones, but for this issue nobody is doing that. I am not including you in this but so many people come here expecting a reply from Apple, it won't happen. Apple does not frequent these websites so any requests for word from Apple here will fall on deaf ears, it seems to be the direction that alot of companies are heading... Netgear are just another example of where you have to actually contact the companies support staff themselves to let them know about a fault because the forums are not being manned by support staff.
They replaced my iPhone by the way, I am sticking with iOS 5.0.0 and I am not getting "No Service". I don't want to risk going through the whole problem again even though it might not happen because not all iPhone 4's and iPhone 4S' get the problem. I will just wait until a firmware that doesn't appear to cause the issue comes out.

Similar Messages

  • Hello, I have a problem. Help me to solve it. The first time I want to buy the game and asks me to answer a security question that I do not remember. Discard them please that I introduced them to

    Hello, I have a problem. Help me to solve it. The first time I want to buy the game and asks me to answer a security question that I do not remember. Discard them please that I introduced them to

    See Kappy's great User Tips.
    See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities https://discussions.apple.com/docs/DOC-4551
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    Send Apple an email request for help at: Apple - Support - iTunes Store - Contact Us http://www.apple.com/emea/support/itunes/contact.html
    Call Apple Support in your country: Customer Service: Contacting Apple for support and service http://support.apple.com/kb/HE57
     Cheers, Tom

  • Hello i have a problem with my MacBook Air they wiped out the operating system then installed windows 7 how do i re install the apple firmware

    Hello i have a problem with my MacBook Air they wiped out the operating system then installed windows 7 how do i re install the apple firmware please help

    That is incorrect. You can install Windows on a Mac, any Mac, without having OS X installed on it.
    To the OP you will need the original system reinstall USB thumb drive that came with your Mac Air if it is older than a Mid 2011 model or if it is newer than a Mid 2011 model you use the Online Internet recovery system.
    If you don't have that original reinstall USB thumb drive you can order one from Apple for a small charge. Call Apple and ask to speak to someone Specifically to order a Replacement USB system reinstall thumb drive for your model year. You will need the serial number of that Air. It is etched into the bottom of the case.
    Eric Ross wrote:
    You can't run Windows on your Macbook Air without having Mac OS X installed with Boot Camp.  So it should be an option to select the Mac OS X partition at startup when holding down the option key.  Take a look at this link, http://support.apple.com/kb/HT4818

  • HT1937 i have a problem with my Iphone 4 Facetime, that since the IOS 7 system came in I have trouble contacting my frieneds. I have contacted my supplier, Golan Telecom, and where I bought this machine and NO one can help me? I really need a Apple suppor

    Can anyone, help me please?
    I have a problem with my iphone 4 Facetime, that since the new ios 7 system has been installed, I cannot use the FACETime? I don't know where to turn? I have contacted a retailer here in Isreal, and I've contacted the Cell come company and I've contacted the repair shop... each one pushes me off on someone else.
    I cannot make any FACETIME calls.... anywhere................ help

    Hmm, I see from the Apple Support webpage it seems you cannot call them directly from Israel, that's not good.
    Okay, so FaceTime stopped working once you upgraded to iOS 7 is that the situation? It doesn't work over either cellular or WiFi networks? I assume you have checked the Settings>FaceTime>FaceTime switch is on and that you have your correct Apple ID in there as well?
    What happens when you launch the FaceTime app and attempt to make a FaceTime call, what message(s) do you get?

  • Hi i have a problem I know that is my safety no longer ask what I should do now

    hi i have a problem I know that is my safety no longer ask what I should do now

    If y forgot your security questions/answers then:
    From a Kappy  post
    The Three Best Alternatives for Security Questions and Rescue Mail
       1. Use Apple's Express Lane.
    Go to https://expresslane.apple.com ; click 'See all products and services' at the
    bottom of the page. In the next page click 'More Products and Services, then
    'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
    ID security questions' and click 'Continue'. Please be patient waiting for the return
    phone call. It will come in time depending on how heavily the servers are being hit.
    2.  Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.
    Otherwise clarify your question/problem

  • A few months ago I bought an imac 27 inch late 2013 ... ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ...

    a few months ago I bought an imac 27 inch late 2013 .. §16GB - and flash memory) - 3,3 Ghz Intel Core 15
    ever since I have continuously problems with my external HDD that disconnect all the time and cause problems in other software (Lightroom, Adobe PS CS6) ... it is not  a HDD problem, because it occurs with my 3TB WD HDD (Time Machine), my 1TB WD and  1TB IOMEGA
    any one have a solution? anyone dealt with this problem in the apple care program?

    You are still under warranty and/or have AppleCare.  Call them.  Let them deal w/it.

  • Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Hello, I've updated the iPhone I have got I have a problem I hope you respond to some of the applications no longer work, such as the safari and skype and many applications are no longer working with the ios7.0.4

    Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad one.

    My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .

    Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
    If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Hello, I have a problem with my mac book pro after running the battery dead on a game.  The display has shrunk leaving two black margins on either side. What to do ?

    Hello, I have a problem with my mac book pro after running the battery dead on a game.  The display has shrunk leaving two black margins on either side. What to do ?

    Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
    Clinton

  • Do I have a problem.  My unit works, but not by the directions

    I may be an idiot. I opened my new nano (I got it from my brother) and saw on the side PC + Mac. Ok, I connected it and booted up into LINUX, that is installed on my PC. It is installed on my personal computer, or am I not too wise? So then I went through [deleted] freaks with the do not disconnect screen until I shut down and disconnected.
    when I did get Xp booted and downloaded Itunes (just about grew a beard, I have dial up speed)I would eject and get the files in use by another application screen that is famous on this forum. that was by opening itunes first and then connecting the nano.
    I found that when I connected the nano first and let the itunes open automatically (this is after reseting once and then restoring) I can get the perfect ok to disconnect message and I thought I was fine.
    I got this unit last a week ago today, and over the last few days notice that when I eject, it never anymore says Ok to disconnect, it just gives an apple logo near the top of the itunes screen and the unit lights up and gives a menu.
    The nano still works (except that just today I noticed that when playing an album a track will be skipped over, even though I can select and play it individually. also, sometimes when I wake it up it doesn't readily want to continue with progress), so do I have a problem?

    Really I think I blundered across the solution.
    I had enable disk use just the heck of it and unclicking it made everything as it should be.
    I saw a disconnect link that said in later versions of iTunes (I have 7.0.2.16) that one doesn't have to wait for the OK message.
    I should be fine.

  • I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...

    I have a problem with running an EXE file on win2000, the Lab View is 5.1 and I do not know if it is 16 bit...what should I do?

    Hi Arika,
    The drivers that you need to install to make your executable work depends on what your executable is doing. To get started, you need to have the LabVIEW Run-Time Engine installed on your target machine (the Win2000 machine you are planning to use) in order to run your executable. Next, you need to determine what drivers your executable uses, if any. For example, if you are using GPIB instrument control, you will need to install the NI-488 drivers on your target machine. If you are performing data acquisition, you will need to install NI-DAQ drivers. If you are doing image acquistion, you will need to install NI-IMAQ drivers.
    All these drivers are available for downloading on ni.com. To get the drivers, go to ht
    tp://www.ni.com/support , click on the link that takes you to Drivers and Updates (under Option 3), and click on the links to get to the driver(s) you need. For example, if you need the LabVIEW 5.1.1 Run-Time engine, click on the All Drivers and Updates by Application link on the main page (http://www.ni.com/softlib.nsf/). Then click on the LabVIEW link, Windows 2000, Run Time Engine, and then you will see the link to get to the page to download the LabVIEW 5.1.1 Run-Time Engine.
    I hope this information helps.
    Best Regards,
    Wilbur Shen
    National Instruments

  • I have a problem with my viber.It has stopped working.I tried reinstalliing it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .

    I have a problem with my viber.It has stopped working.I tried reinstalling it again .On the setup option after entering my phone number and continuing ..it either exists or gives no service message .My other applications are working fine ..other applications that require internet too are working fine.

    Please get in touch with Viber's customer support.

  • I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

    I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "SQLite3.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • Ebooks,  half the books I have bought have complete sections or chapters missing.  Does anyone else have this problem or am I doing something wrong in the downloading of them

    Half the ebooks I have bought from iTunes have large sections or complete chapters missing from them which is beginning to seriously irritate.  Does anyone else have this problem or it is something to do with the downloading. In which case does anyone have an answer?

    You should be able to delete and redownload them via the bookshelf in the iBooks app : tap the Edit button top right of the shelf, select and delete the books, then go into the Store via the button top left of the bookshelf, and in the Purchased tab (bottom right of the store) find and re-download the books.
    If they re-download in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find those books and use the 'Report a Problem' link.

  • Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

    Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

    Please be more specific. What Premiere project? What version of Premiere? Which operating system? What CoDecs do the QT fiels use? Are all the video files in the correct folders inside the Premiere project structure? Your description sounds like you are attempting to open a Mac based project on a PC and your video files are either in the wrong location or use a Mac-specific CoDec, hence they cannot be read on a PC.
    Mylenium

Maybe you are looking for