I have sluggish video and audio when mirroring ipad 3 or iphone. Any solution?

I have the new ipad and also the latest iphone. I really want to use mirroring to stream a particular video each day that i subscribe to using the mirroring feature. I have found that the audio keeps dropping and playing catch up. The audio drops out often whether i use the ipad or iphone. I have a very good wifi connection in the house with full bars for what that is worth. The audio is fine if i do airplay only. But the mirroring feature drops the audio often.
Is there a way around this?

I had exactly the same problem. The solution is whatever device you first paired your jam speakers to, go back to that device and and delete jam2 from the bluetooth settings in that device. You're then free to pair your speakers to another device, mac book, ipad, whatever.
So each time you want to pair your speakers to a different device from the last, you have to go into the bluetooth settings of said device and delete jam2 from it's memory. A bit of a headache but nowhere as annoying as wondering why the **** your speakers won't with your mac/ipad when they've just been working with your phone!!!!

Similar Messages

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

Hi
In iMovie'11 (version 9.0.x)
on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
Here one can select the Pre-Set speeds
Are you familiar with getting 'inspector' to run?
No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
Yours Bengt W

Video and audio formats for iPad

Hey, guys.. I've tried searching this up in the forum but didn't have any luck with that..
I can't seem to upload my movies and songs into iPad... I tried converting my movie into .mov and .mp4. They can both be imported into my iTunes library but when I drag it to the iPad tab it says it cannot be copied because it cannot be played on the iPad. And some of my albums just can't be imported.
May I know the preferred format for my movies and my songs? And what could be the problem with my importing..
Thanks heaps.

Here are the spec for video and audio for the iPad:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Exactly what cables and hardware do I need to connect my early-2008 MacBook Pro to a flat-screen TV monitor to have both video and audio?

Hello--
I'm trying to figure out how to connect my 15" MacPro Book from early 2008 to a Sony flat screen TV monitor. I've been told I need a "Mini DisplayPort to HDMI Adapter" and a "HDMI to HDMI" cable, but I've also been reading that some cables only work with 2010 & 2011 laptops and that I may need additional cable/hardware to obtain audio. Could someone advise me on exactly what products I need to purchase?
Thank you!

Which MacBook Pro 15" do you have?
With the silver keyboard (Early 2008)) or that one with a black keyboard (Late 2008)?
If you habe the Late 2008 you can use a miniDisplay Port + Audio to HDMI like that one (stereo sound) or that one (5.1).
If you have the Early 2008, it's not so easy, because you need a DVI + Audio to HDMI like that one (the Audio Channels had to be converted to Coaxial!) So much more adapters! Maybe there is a manufaturer which has the all in one solution)
Both MacBook Pro DOESN'T support audio on the video output! The later ones (Mid 2010 and later) supports Audio output within the miniDisplay Port.

Recording Video and Audio at Same time with simultaneous sync

I want to record a keyboard performance into garageband and at the same time record the playing of that performance with my video camera. Then I want to create a movie using the music from garageband and the video from the camera. I was thinking that if I can sync the video and audio when I'm recording the session, then that part is taken care of. Or, maybe this is easier than I think it is?
Is there a way to do this so that I can use the garageband record performance and have it synced to the video on the camera?
I don't want to use the audio from the video camera because the performance that is captured in Garageband will be much better and I can do editing of the individual notes in GB.
In the end, I just want to make a movie and/or podcast of the performance.
I'm a newbie regarding this, but I did search the forums and couldn't find anything specific. Mostly it was about importing video into GB3 and then syncing new audio. I'll basically have audio and video from the same performance in two separate locations and I want to bring them together perfectly in Garageband.
Thanks for any help you can provide.
Powerbook G4 - DVI Mac OS X (10.4.9)

Okay. I got the video and audio all together. I told you I'd link to it when it was up.
http://www.youtube.com/watch?v=FxssYpUNJm8
There's also a copy of it at http://www.myspace.com/bonjimmy/
And as a quick side comment, even though I uploaded the same video to both YouTube and MySpace, the MySpace version is much better. YouTube must do something to the video after it's uploaded.
What I learned doing this project:
I recorded the video first (which gave me the sequencing of the piano performance) and then I dubbed the audio in later. However, there wasn't a good way to sync the video and the prerecorded piano, so there are some spots where the dubbed audio vocal isn't accurate to the video. I'm not sure what the pros do for this. I was hoping I'd remember how I sang for the video but when a couple weeks go by before re-doing the audio, it's about impossible. I tried, though.
I remember working with an old 4-track and smpte to a sequencer a long time ago. With the way it is now, it's pretty cool that you can record digitally and mix and match and everything falls together perfectly as long as you have a place to match the video and the audio. It's pretty cool.
What else???
Does anyone have suggestions that would have made it better? Also, if you have suggestions on my performance or whatever, I'd love comments, but you can do that on the linked page.
Thanks again for all your help. (The point of the video is because I'm thinking about getting back out there and doing some more playing... I'm looking for a band or something else interesting...)
Powerbook G4 - DVI Mac OS X (10.4.10)

How to sychronise a streaming video and audio?

Hello everyody,
I created a player application which plays a streaming video together with a sound. In the beggining it starts ok and sychronised but later video goes slower than sound and as a result they are totally out of sych at the end. I believe the problem is that the video file is bigger than the sound file and it buffers more so the video always stays behind the sound. Is there any way to fix it and have my video and audio always sychronised? To have the sound embeded with the audio is not an option.
Thank you in advance.

mrsndmn
On what computer operating system is your Premiere Elements 13 running?
There are several ways to avoid disturbing an existing Timeline when you are adding to it.
1. Using what are called keyboard modifiers, such as Ctrl or Alt (Windows).
2. Grouping block of clips so that the clips move together
The following video tutorial is offered for informational and not promotional reasons
Premiere Elements: Arranging clips on the Timeline using modifier keys | lynda.com - YouTube
It uses a version of Premiere Elements earlier than 13, but the principles involved are the same.
The video and audio that are going out of sync.... are they linked or grouped before the addition to the existing Timeline?
After the fact, you will need to move the Timeline components back in place.
If the video and audio are not linked or group, you can
(a) highlight the clip, hold down the Alt key of the computer main
keyboard and tap the appropriate arrow key for a 1 frame per tap nudge of the clip.
(b) highlight the clip, hold down the Shift+Alt key of the computer main
keyboard and tap the appropriate arrow key for a 5 frames per tap nudge of the clip.
Please review and consider. If questions or need clarification on the above, please do not hesitate to ask.
Thank you.
ATR

Video and audio out of synch after export

Hello guys,
I have 5 minutes long video on timeline.
1 audio and 3 video layers.
All looks good, but once I export it as QuickTime self contained movie (current settings) to my desktop, video and audio is out of synch.
Any ideas what it might be wrong?
Thank you for any advise.

Hi
Did You Render All - first - before Export
Did You Mixdown Audio - Render Only - last line
What material was used
• Video Codec and fps
• Audio file formats and bit-depth and frequency e.g. .aiff 48kHz 16-bit
• What kind of Project Set-Up did You use e.g. Easy Set-Up - PAL-48kHz
Yours Bengt W

Delay of 5 seconds between Video and Audio.

Hi,
I've a site where consumer can take a live meeting with the beauty consultant. The problem I'm facing is during the video chat. Basically there is a delay of 5 seconds between Video and Audio when I access the site from out of my network but when I access it within my network (VPN) then it's work fine.
Please help me out from this problem. I'm using FLEX & FMS 3.5.
Thanks,
Sanjay

Go through the article "http://www.adobe.com/devnet/flashmediaserver/articles/dynstream_live.html" and see paragraph with heading "Obtaining client maximum bandwidth capacity". This says how to use "Live aggregate messages". You can try disabling it also which can be done as below:
Find Application.xml in this conf directory and search for queue tag. Disable the queue.
<Application>
                
                
                
                
                <StreamManager>
                                <Live>
                                                <Queue enabled="false">
                                                                <AggregateMessages enabled="false">
                                                                </AggregateMessages>
                                                </Queue>
                                </Live>
                </StreamManager>
                <Client>
                                <AggregateMessages enabled="false"></AggregateMessages>
                </Client>
Let me know if this helps.

How do I send raw video and audio data to FMLE?

Hi,
I have raw video and audio data on CPU memory.
How do I send them to FMLE?
Is there sample code or SDK?
Thanks for your answer.

Hi, Burzuc.
Raw video and audio data are from a video capture board like Blackmagic Design's DeckLink or other's.
I want to stream them after some processing by my application.
Regards.

CS4 Pro saving video, and audio.. seperate

I need to have the video and audio together.. not two seperate files, my project is due in two days and I have no idea how to get them both together.. I'm using cs4 master collection!

>export the file to a dvd
You do not export the file TO a DVD... you export FOR a DVD
Exporting video and audio as 2 files is by design... or you may export as AVI and use that in Encore
You then open ENCORE and have it read your 2 files and you AUTHOR to DVD, and then Encore will write the DVD
Since you want many copiers, you would author with Encore and then instead of writing a DVD you would tell encore to write an ISO file to your hard drive, and use the FREE http://www.imgburn.com/index.php?act=download to write to DVD

Syncing video and audio

I have been syncing video and audio into a sequence and using those sequences in a new master sequence. Is that the right way to do it? Is there a way to have the video and audio in a useable clip? I could not find this information in the manual, but if I missed it can someone refer me to the chapter that covers this topic.
Thank you

you can set in and out points for both the video and audio clips in either the viewer or in the browser, then select the two, right click - merge clips (or Modify/Merge Clips if you prefer the menu.)

I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

Why is FCPX not allow me to cut both video and audio tracks at the same time?
My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

fulei wrote:
The audio track does not edit along with the video. They go out of sync
Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
Russ

Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

Hello All...
Back after a brief absence, things look a little bit different.
I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
Thanks!
PowerMac G5 1.8 Dual Mac OS X (10.4.3)
Message was edited by: Dan Foley

Thank you for the replies. Everyone was correct about the jack, interface, and phasing problems. I have been unplugging my motu audio interface and then using headphones at work. I have not changed any detailed audio output settings in logic. When I read that the jack might be a problem I tried switching headphones. This actually helped. I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems. I can use these headphones with other devices but not the mac. I have to use ipod ear buds and the phasing seems fixed. Hopefully this information is helpful to someone else.
If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio.

Video and audio goes out of sync when imported into Premiere

I have some videos ripped from some DVD that an acquaintance made, with an open source program called HandBrake, with the default "high profile" settings. When I play it both in VLC and in Quicktime, it plays just fine, but when I import it either in Premiere or in After effects, the video and audio goes out of sync (the video ran faster than the audio and when the video stops, the missing audio is trimmed).
Video info according to Premiere (in Spanish but you may get the meaning).
Ruta del archivo: [...].m4v
Tipo: Película MPEG
Tamaño de archivo: 667,7 MB
Tamaño de la imagen: 720 x 480
Profundidad en píxeles: 32
Velocidad de fotograma: 29,97
Formato de audio de origen: 48000 Hz - comprimido - Estéreo
Formato de audio del proyecto: 48000 Hz - Punto flotante de 32 bits - Estéreo
Duración total: 00:30:35:15
Velocidad media de datos: 372 KB / segundos
Proporción de píxeles: 0,8889

"HandBrake, these days, is almost entirely about H.264 video, aka MPEG-4 Part 10. HandBrake is migrating to quality-based encoding."
Hmmm. I use HC Encoder to make my DVDs because it's the only free encoder I've found with the much more professional Constant Q encoding option. But HC Encoder doesn't do HD sources for Blu-ray, so I've been wondering if I'd be stuck with the lame-*** consumer CBR and VBR options most encoders provide (including Adobe - hint, hint) when I eventually start working in HD. This is a very interesting program, Handbrake. I will have to check it out.

HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

Hi
My first two thoughts
• Shared to Media Browser - BUT as Large or HD - try Medium !
• audio from iTunes - use to go silent
- in iTunes
- Create a new PlayList with needed audio
- BURN this as a standard Audio-CD (.aiff) - NOT .mp3
- use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
My notes on this:
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

I have sluggish video and audio when mirroring ipad 3 or iphone. Any solution?

Similar Messages

Maybe you are looking for