I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again
I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again
Hi Ryan,
I managed to find this reference specifically for restoring on Snow Leopard:
If you are using Mac OS X Snow Leopard, start your computer from the installation disc. Then use the "Restore From Time Machine Backup" utility.
Now that was copied from this more comprehensive reference:
Mac Basics: Time Machine backs up your Mac
You may also find this article helpful:
http://pondini.org/TM/14.html
Finally, I cannot see why Time Machine would leave out your playlists and ratings? Think about it. Why would Time Machine specifically copy everything BUT your playlists and ratings? Ryan, what are your options? I would have to ask you this: Are you certain that you properly did the sync? That is another/different forum altogether: Using iPhone /see subsection on Syncing.
Either way...
Best Regards,
mm
EDIT: For whatever reason I tried three times to edit out one of the redundent adjectives... either different or another which preceeds the word forum, but the advanced editor would (apparently NOT allow me to do so). I hope that it doesn't render without any adjective before the word forum.
Similar Messages
-
Is there a way to have some sort of stereo mix audio input for mac?
Is there a way to have some sort of stereo mix audio input for mac? also so i can have a voice over?
polyglotinc wrote:
Actually, after scouring the web, I see that RogueAmoeba also has a free utility called LineIn which simply sends the audio in to the audio out and doesn't interfere with other programs like iTunes!
On the other hand, after downloading and trying it, there is a noticeable latency between what goes in and what comes out.
The latency is in the computer, not the software. Most of the latency is in the A/D and D/A conversion.
You need to connect the analog input to the analog output directly to get zero latency.
Check this page:
http://forums.macrumors.com/showthread.php?t=368834 -
I updated to Firefox 4.0.1 this morning. Norton 5.5 is now disabled and the message states that it is incompatible with 4.0.1. I need the Norton features enabled. Can I go back to 4.0 until this is resolved?
Please do a Live Update to the Norton product.
They have provided an important update to Firefox 4.0.1. -
Macbook Pro 13'' slow video downloading from some days ago: why?
From some days ago my Macbook Pro 13'' download video clip very slowly. Someone helps me.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting. -
PROBLEM WITH RAW FILES with WINDOWS 8.
I have photoshop CS5 extended on my PC; some days ago I had to substitute Windows 7 so I installed Windows 8. Since then my files RAW are not supported by CS5, I cannot see them anymoreYour answer has been very useful. I have made ACR update and now my RAW files are normally supported and visible.
Great !
Thank you very much ... -
A day ago I updated my iPhone4 to io5 and iTunes update as well. I use windows7 (64bit). now iTunes freezes at open and I have to force it closed. Anythng I missed along the way?
Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
Hi ...Some days ago i bought a used iphone 4s....but i can't activate the phone...when i connect it to itunes it shown that activate the phone but the person was not give me the ID & password....pls help me for this issue....Iphone is my favourite phone...in my child hood i love Apple products & till now......I can't activate it & for this reason i can't find the carrier network & can't make any call....pls help me...thanks for always support..My device ios is 7.1.2
& IMEI is : *****
Br-----------------------
Fazlur
<Personal Information Edited By Host>It's a security risk to post your IMEI number and I've asked the Hosts to remove it.
If a second-hand iOS device has been 'Activation locked' then only the previous owner can unlock it, either by providing you with the account ID and password, or by removing it from his list of devices (as he should have done before selling it) - please see http://support.apple.com/kb/ts4515
If you are unable to contact him to do this then I'm afraid you will not be able to use the device - there is no other way of unlocking it at all. Apple cannot unlock it for you.
You should if possible return it to wherever you bought it and ask for a refund as in this event the device is completely useless. -
Creative Suite 6 Student Edition - some days ago I send you my product code and my student card. I
Creative Suite 6 Student Edition - some days ago I send you my product code and my student card. I have still not received an answer?
This can take up to 6 weeks and in the current madness with the CC release, everybody will be busy. Contact support directly by phone, web chat, contact form or whatever, if you are in a rush.
Mylenium -
my issue is that my itunes store have some probleme i cannot update my app and purchase app or download free app also it keep on tell me that an unknownerror occured (0x800b0101)
You could try this.
Back up all data.Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Credit for this solution to ASC member luis.pinhor. -
I'm running a 13" MAC pro with version Lion v.10.8.2 But none of that will matter once you hear my news. Some days ago, I copied then pasted a long piece of type into into my calendar. Now, the things jammed up and all it does is beep at me. I can't delete or cut the entry. There much be someone out their smarter than I. Help!
Try restoring from your backup of a day or so prior to when you made the error.
-
Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced person.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I am unable to download updates directly to iPad 2 , now trying to reinstall one from scratch but download keeps stopping and the restarting. Can you offer any advice, this happening when trying to download to laptop in itunes as well. Have tried to download on different broadband lines without success. Is this an apple problem due to high demand or something else?
Everything has worked well until about a month ago, up to date iOS 5 and itunes installed. Tried resetting numerous times, turned off all apps still no joy. Ipad was great but now feeling buying one was mistake. Also recent music purchase was useless and tunes would not play correctly.Since this is happening on the iPad and the computer, it might be worth a try to reboot your router - unplug it from power for about 30 seconds and then plug it in again.
Quit iTunes on the PC, reboot it and the iPad as well
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons -
Since I downloaded Security Update 2012-006 for Mac OS X 10.6 I have been unable to print or upgrade my Quicken 2006. How can I fix this? Hurry! I need to pay my bills.
thank you very muchLooks like Apple did the same thing with Lion that Microsoft did with Vista. Brought it on the market before it was ready.
I run a MacBook Pro and upgrading to Lion caused me two days of trouble and computer crash. Router settings removed and router blocked. Dongle not recognised, you name it.
In the end, I gave up and using my Snow Leopard installation disk and a Time Machine Backup finally got my computer up and running again. Thanks to Lion, I think I'll stay with OS X 10.6.8 at least it's reliable. -
I bought Photoshop CS2 some time ago. I got a new mac (OS X 10.8.2) and when I'm trying to install i
I bought Photoshop CS2 some time ago. I got a new mac (OS X 10.8.2) and when I'm trying to install it I introduce the cd, accept and after it copies the files, appears "The installation failed" The installer encountered an error that caused the installation to fail. Contact the sofware manufacturer for assistance. How can i fix this problem?
The CS2 version of Photoshop is Power PC code only, It won't work with your new Intel Mac OSX 10.8.2
I found this:
Q. Will Adobe update Adobe Creative Suite , Studio 8, or individual applications, such as Photoshop CS, InDesign CS, Illustrator CS, Dreamweaver 8, Flash Professional 8, or After Effects 7.0, to be Universal applications?
A. No, Adobe does not plan to re-release current products as Universal applications that can run natively on both Intel- and PowerPC-based systems. This applies to Adobe Creative Suite 2 and Studio 8, as well as individual applications such as Photoshop CS2 . . . .
Sorry, SOL -
I updated my Lightroom to ver 5.7.1 and and the new features don't show but it says that 5.7.1 is active. also when I start the program it ask me to update. what is the problem?
because v6.0.1 is the latest...
and you either have to buy it or you must have subscription to get version 6.
Maybe you are looking for
-
Alert/Email notification for contract getting expired and threshold limit
Hello All, For Central Contract management SRM 7.0 we have a requirement where an alert or e-mail notification is to be sent to a group of purchaser if following occurs. u2022 The validity period of a contract is about to expire u2022 The gre
-
How do I create an underlying master page for my master pages (without messing them up)?
I created a Muse site long ago, and wanted to fix my SEO easily overall by better analytics among other things. Perhaps I am doing this the wrong way but I was thinking I could create a master page that I could just drop the html I needed into, and t
-
Closing down an SAP implementation for restart later
OK, this is a strange one, to me at least, but here goes... Our company has been using an implementation of SAP for a specific project that is now coming to an end. They want to close down the system completely, but with the option of relaunching it
-
Find texts with more than one Character Style applied
Hi, If you need to find - and replace/restyle - texts where more than one Character Style is applied - here is tool for you - for ID CS3 and ID CS4: http://www.adobescripts.com/search.php?query=multi+findreplace+grep&action=results You can define opt
-
PDW : DWLoader in Execute Process Task, Success Value return code
Hi, I'm using SSIS Execute Process Task to call DWLoader. It seems the Success Value return code is 2. Which is working fine except that after all data are loaded in my table a 0 return code is sent. And so my task fails. Any idea how to handle this