I have some image compression questions...

I have a website/client with so many images on the site I need to compress each image to about no more than 50 k. I'm doing this through Ps CC, but some images get all that pixel junk in 'em at the file size. Any recommendations?
THANK YOU!

The more compression you apply to an image the more apparent the pixelation will become. If you have to reduce them to under 50k then there isn't much you can do if the images are physically big and applying a lot of compression is the only way to get them under the file size.

Similar Messages

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.

I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
ible?
(2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
(3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
(4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

Hi Vishal,
I'll try to answer your questions as best I can.
1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
Ron

I have some database related questions

hey all
i am currently designing a java GUI program for a dvd renting shop.
this program obviously needs a databse, i was just wondering how much possibly a database on a home pc could hold data because this shop have about 15000 DVD title and about 1500 client so i was wondering how much a mySQL databse table could hold....
i also have another question...this shop have an access database...my question is can i use the existing database and querie it from my java program??? do i need a driver ??? can i querie an acces databse just like a regular SQL databse(e.g. SELECT * FROM TABLENAME) ????

hey all
i am currently designing a java GUI program for a dvd
renting shop.Why not simply download JBoss Seam's DVD store example. It's fully coded for you already!
this program obviously needs a databse, i was just
wondering how much possibly a database on a home pc
could hold data because this shop have about 15000
DVD title and about 1500 client so i was wondering
how much a mySQL databse table could hold....
You will not have issues even with Access with that few a number of rows. Disk is really the only limitation on the size of the database. (There can be O/S or database specific limitations, such as 2GB of total size). So, do not worry about how many records.
When you truly get a large number of records (tens of millions plus) or you are joining two large tables, then you can have performance issues. Good use of primary keys, indexes and database design can limit this issue.
i also have another question...this shop have an
access database...my question is can i use the
existing database and querie it from my java
program??? do i need a driver ??? can i querie an
acces databse just like a regular SQL databse(e.g.
SELECT * FROM TABLENAME) ????You can use Access, mySQL, Postgres or any number of other databases. Each will require (and will have on their site) a JDBC driver that you need to have on your application's CLASSPATH. My recommendation would be mySQL or Postgres. Both are free and excellent quality.
As an aside, you should rarely SELECT * from any table (other than a code or lookup table). Use a WHERE clause to limit results. What user would possibly want to scroll through ALL 15,000 records? :^)
- Saish

Have .png images in indexed mode - how to edit?

Hello - I have some images in indexed mode and my Photoshop CS 4 won't let me edit them - how can I get them out of indexed mode?
here's a screenshot of my work area:

You can also look at my profile and see how many people have awarded me points for useful responses.
I'm sorry if you are unable to interpret my responses as anything but helpful. I'm not attacking you. I am pointing out the problem with CMYK conversion. Does the fact that fewer functions are available in CMYK mode tell you that CMYK is not the ideal mode for editing images? With color profilng and CMYK preview, there are few situations where one really must dumb down an image to CMYK mode.
Let's grow up and discuss Photoshop, not your own interpersonal issues.

Image Printing Question

Hello,
Bottom line summary: How do I use the Media and Quality setting to get a good image?
I have an image printing question for an HP 8600 Office. I am trying to get a decent quality image to print
on regular paper. I gather that I will not get the quality of a photo printer. I gather I'm supposed to use
HP glossy paper. Please read on ...
Images come out grainy (rastery) when embedded from an MSPaint project, and if I use Word. However when I printed just an image from image viewer it came like a photo ... but I can't remember what I did. It definitely is capable of printing better. My cartridges all check out, etc. I did the Print Quality Report ... I sure wish I could get that quality when I print other things.
I tried messing with different settings from the Print - Preference. The Quality (Best, Normal, Draft) doesn't effect the outcome. I tried going into Print - Preference - Media and it makes a difference. I can't figure out which is the best setting for plain paper ... but it's not plain paper. The image rendering algorithm appears to be different for different Media settings. I also tried setting the Advanced Resolution to Maximum DPI. I haven't been totally methodical about this as I was in a rush.
I see that the printer is being "smart", perhaps a little too smart.
So my question is multipart:
- Is there documenation on the what the Print - Preference - Media settings do?
- How do I get it to not use grainy/rastery image method, but use the nicer photo method?
- Should I print Maximum DPI?
Thanks,
- Dave -

Hi @DaveGold , and welcome to the HP Forums!
I hope you had a great holiday!
I see you're looking into photo setup options. I'd like to help!
First I'd recommend this document on Changing Print Settings in Windows 7. This document should show all the settings you're looking into.
Also, another thing to keep in mind, when you select 'best print quality' and 'photo paper'. It will only be as good as the source image.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Some problems and questions

I have some problems and questions about my MSI MEGA PC 180 system...
One problem is that MSI live monitor only works one time after every new installation then is just say "The URL is invalid" every other time I try to search for updates.
One problem is that one of the fans doesn't turn off when I turn of the computer and the only way to get i to turn off is to turn on the hifi mode and turn it off then the fan stops. And some times the fan can start after a while when the computer has been turned off.
There are two fans for the cooling of the CPU but PCALERT only shows the speed of one of them.. why? according to the manual one of the is called CPU fan and the other one is called sysfan but only CPU fan showes i PCALERT.
Are there no other way to control the Tv other than with the Home Teather system than I find way to slow if you use 1280x1024 resolution on the screen like I do. And are there no way to sort and remove channels in home teather? As i is now I can't move the channels in the order I want and I can't remover channels that the auto search thaught was channels but aren't?
An other thing that I find annoying is that the fullscreen mode of home teather doens't cover all off the screen it doesn't hide the systray and leaves a small but annoying kolumn to the right that showes the backgrund and that is very annoying to watch tv if you have a light backgrund because the kolumn are so bright.

Welcome Kabbo,
I see you agree that MC III is far from perfect. Perhaps you can try the combination of Media Portal and Ir2Key. Just read some of the other posts including "WinIRX.ocx internals/usage" by ddookie. Another possibility is to try Dscaler, but this program is only for watching TV.
Regarding the processor fans: its normal that only one of the two shows up in PcAlert; when you look closely to both fans you'll see that one has only a two-wired connection.
The problem of a fan not shutting down is new to me, I suppose you have checked the connections to your mobo?
Greetz,
JaDi

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can speak or response me in thai language
1. ผม อาคเนย์ พำนักอยู่ประเทศไทย กรุงเทพฯ มีปัญหาสอบถาม ดังต่อไปนี้
- กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
- ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
ขอบคุณครับ
อาคเนย์ อุดปิน
กด
<Edited By Host>

Google translation:
พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
http://www.apple.com/emea/support/itunes/contact.html

Today i am going to buy iphone 4s . i have some questions.

i wanto to buy IPhone 4S off contract from apple store , will they sell it to me? is it a factory unlocked iphone?? if i need any repairs in the future .what happens if i send it to repair , will they give me a AT&T phone , do i need to wait for the "factory" unlocked that is supossed to come in november ? the last one ,
when there is an update for the iphone, i want to update it. but my iphone is factory unlocked . and i was wondering if it will still be factory unlocked if i updated it?
because i just heard .someone already bought a free-contract iphone 4s at the apple store. you just need to CONNECT to itunes and then it said," congratulation your iphone has been unlocked" is it true ? can someone answer my question?
i am waiting for your question......................
[ thank.]

That is impossible since every iPhone sold in the USA until the November release will have some sort of sim card in it. What differs is whether you purchase subsidized or not. Once the item is purchased without any subsidy it is automatically unlocked. I've unlocked two so far just by plugging them into iTunes: "Congratulations, your iPhone has been unlocked".
The unlocked packaging will be exactly the same but will have different SKU numbers and will not come with a sim card and will have an ejector tool.
I just had some issues replacing my unlocked phone since it was malfunctioning. They replaced it with a locked unit & then came to the conclusion they are unable to unlock it. I had to return the phone and repurchase another for the unlock to work again. Come Novemeber they will have actual "unlocked" replacements.

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.

Does anyone use a LaCie external hard drive with their Mac using imovie '09? I have some questions.

Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do. You would connect and use it the same as a G-Drive.
Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time. The conflicts usually appear as either dropped frames or a complete freeze. This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders. (The problem is the camcorder's FW implementation, not the hard drive.) The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD.

I'm going to install Arch this weekend but I have some questions

Currently I use Linux Mint on my primary PC, but I've installed Arch on my older PC at my parents house. I like it a lot and I think I want a distro that is rolling release and also that I build myself (as opposed to installing all of the bloat on Mint). However, I do have some questions; Linux is pretty new to me (been using it since about November) so I don't know exactly how everything works.
1) How do I know what packages I have to have installed for building C/C++ programs? I know in Ubuntu install gcc/g++ by itself doesn't get the job done, you need build-essential to get all of the libraries. Also, what packages do I need for OpenGL and SDL? I'm a CS major and I'm in an OpenGL class so I need to be able to compile OpenGL programs; SDL is for my own purposes, but I'd still like to have it.
2) I use Amarok to transfer songs to my iPod. Amarok 1.48 and libgpod 0.6.0 are in the repos and I know both of those are compatible with my 6th gen. However, I do have a question about transferring album art. On Mint, Amarok transfers the album art as I transfer the album, but someone told me that Amarok doesn't do that by default; there must have been a setting changed somewhere to do that. I looked through Amarok's options and didn't see anything like that... anyone know if I can do that in Arch, and how? There's no real information about Amarok in the wiki.
3) I'm going to use Gnome environment but some KDE apps (like Amarok). Will there be any problems with that that I should know about in advance?
I'll probably have some more questions once I actually install Arch, but that will do for now Those are the important ones.

1) You know by seeing its dependencies on pacman or by the developer documentation. Unlike other distros, you don't need to install dev packages. Example: You have gcc and all the basic gnu tools installed, and you want to compile a program that is not in a arch linux package yet (if theres a package, you can build it using abs / makepkg and pacman will handle the dependencies) and requires, for example, a library called "xyz", you only need to download "xyz" from pacman, and all the dev stuff will come together (like header and etc).
I hope it helps.

HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

Same reply.

Picked up a B/W.. have some questions

Hey guys. I picked up a B/W yesterday for a nice spare computer and i have some questions.
1. The former owner upgraded to 10.3 but the computer is lacking serious speed. I know it's not going to be fast but i have a feeling the Memory and video card is holding it back. It only has 256 megs of ram and i would like to add some more. What the max amount i can add? I heard 1GB but is it possible to do more? THe video card is the original and seriously *****. Whats a great card everyone runs? I was looking at the new HD series on new egg but i think it's designed for a pc. Will it work?
Also.. What's the best place to buy pieces for this mac? Any good online retailers? Thanks again
Ron

Before you even think about investing in this computer you might want to check if it is a Rev. 1 or Rev. 2 model. I can't tell you how because I have never laid hands on a BW but apparently the Rev. 1 starts behaving really erratically when you try to upgrade things like the hard drive, and you may quickly tire of a tiny hard drive.
As for parts, there's the old standby www.mac-sales.com but once you start buying new upgrades for that computer you will quickly outstrip just buying a used G4 instead. LowEndMac Google groups is a good place for aged machines, and of course there's e-bay. There's also a variety of used Mac and parts retailers, though I think a BW is even outside their interest range now since nobody wants to pay for parts for a G3 what they have to charge to stay in business.

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I have some image compression questions...

Similar Messages

Maybe you are looking for