I have some problems. That might be an understatment...

I had some trouble with my computer awhile ago, where it was having trouble starting up sometimes either just sitting there at the initial loading screen or sometimes just crashing, periodically I would get the mac version of DOS I guess you could call it.
Anyway one suggestion I got on here was to zero out the data on the hard drive and then do a reinstall of the start up disc. This work wonderfully. And after it worked I made sure to partition the drive in case this were to happen again I would atleast keep my stuff and only have to replace the start up drive. Unfortunately, it did happen again but the solution worked again. Yah! But now just a few week after it happened the second time, the problem has returned with a vengence.
I've tried to zero out the data on the start drive numerous times. But whenever I try to reinstall the start up disc it gets an error and quits (it just says error, not very specific). I'm planning to take it to an apple store (by the way do they actually do repairs if anyone knows?) but since I'm away at school that may be a few days maybe even a week since I don't have a car and I would like to keep my down time to a minimun.
i ran a hardware check and came up with these error message:
4MEM/40000000: 05972e04
4MEM/6/40000000: 09572e04
4MEM/2/40000000: 0a516e44
I think its a memory problem partially because of the MEM part but also since it looked like it was checking the memory at the time the error popped up.
Sorry if the information is kinda sparse but if I could get any advice I would greatly appreciate it. Preferably if they helped me not loose what info I still had on the hard drive but at this point I'll take any answer.
I'm assuming that doing a full zero-out of the data might solve the problem but I kinda want to save that as a last resort incase no other solution come up.
sorry its so long. ^_^'
Message was edited by: fredgregjoe

Well I got a chance to try it but not until after a few failed attempts to load the startup disc installer disc prompted me to format the entire drive since with how much difficulty I was having to get it to load, I might not have another chance to fix it that way if that was what was causing the problem.
Anyway, I took out of the memory "sticks" and ran a hardware check and it got the same type of error message as before. Tried it with just the other stick and it came up clean. Hopefully that's my only problem. Thanks for the help. I guess from here I'll try to do a reinstall of the startup disc with just that one stick working and then go to an apple store to see about getting that memory replaced the next time I can.

Similar Messages

Spinning wheel of death is killing me. Have some info that might help.

Started occurring about a week ago. It happens whether I am running several applications or just surfing internet. Seems to get progressively worse the longer I have computer on. I usually eventually have to power off. Happens regardless of which user is logged on. Started in safe mode and no difference. Ran the disk utility and Repair Disk and everything was OK. I have included the Etrecheck below. Yesterday, I got pop-up warnings that said "Your system has run out of Application Memory". I'm still relatively new to Macs, so I would appreciate any help anyone can share. Thanks!
EtreCheck version: 1.9.11 (43) - report generated June 7, 2014 at 9:19:01 AM EDT
Hardware Information:
          MacBook Pro (13-inch, Mid 2012)
          MacBook Pro - model: MacBookPro9,2
          1 2.5 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 4000 - VRAM: (null)
System Software:
          OS X 10.9.3 (13D65) - Uptime: 0 days 0:2:7
Disk Information:
          TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (445.25 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-8A8
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Gatekeeper:
          Mac App Store and identified developers
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
Launch Agents:
          [loaded] com.epson.eventmanager.agent.plist Support
User Login Items:
          iTunesHelper
          Dashlane
          Genieo
Internet Plug-ins:
          FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          Default Browser: Version: 537 - SDK 10.9
Safari Extensions:
          Dashlane: Version: 2.4.0.56001
          Omnibar: Version: 1.2
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
3rd Party Preference Panes:
          Flash Player Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
              79%          WebKitPluginHost
               3%          WindowServer
               3%          Safari
               2%          P72E3GC48.com.dashlane.DashlaneAgent
               1%          hidd
Top Processes by Memory:
          1.69 GB          WebKitPluginHost
          57 MB          Safari
          29 MB          P72E3GC48.com.dashlane.DashlaneAgent
          25 MB          com.apple.WebKit.WebContent
          25 MB          SystemUIServer
Virtual Memory Information:
          27 MB          Free RAM
          1.04 GB          Active RAM
          1.02 GB          Inactive RAM
          574 MB          Wired RAM
          198 MB          Page-ins
          724 KB          Page-outs

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have iphone 4 and have never updated itsince i've bought it. now i would like to update it to iOs 7. maybe can i have some problems in doing this due to the fact that i've never updated it until now?

I have iphone 4 and have never updated itsince i've bought it. now i would like to update it to iOs 7. maybe can i have some problems in doing this due to the fact that i've never updated it until now? thanks in advance for every reply

Did you follow this article to update your phone?
iOS 4: Updating your device to iOS 5 or later
iOS: How to update your iPhone, iPad, or iPod touch
If your device has modified software installed (jailbreak), you might get problems using the phone after updating it.

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

HT203433 my issue is that my itunes store have some problem i cannot update my app and i also purchase app or download free app on it . it keep on tell me that ;an unknown error occured (0x800b0101)

my issue is that my itunes store have some probleme i cannot update my app and purchase app or download free app also it keep on tell me that an unknownerror occured (0x800b0101)

You could try this.
Back up all data.Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Credit for this solution to ASC member luis.pinhor.

I have some songs that have an exclamantion point next to them and I can't get them to sync. I had to move them manually into a playlist and succeeded in doing that but now the playlist won't sync. What's the problem?

I have some songs that have an exclamantion point next to them and I can't get them to sync. I had to move them manually into a playlist and succeeded in doing that but now the playlist won't sync. What's the problem?

I have the same problem and I am very upset. I have heard that Apple/iTunes is removing all songs that are unlicened for this type of download. Apple does not want to be responsible for pirated music. Much of mine is down loaded from CD's. I have to go to search and put in every song and then, if found, put it into My Music then back into iTunes. WHAT A HASSLE. I don't remeber reading anything about this. 224 songs so far. NOT HAPPY.

Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do

Please i nedd help my account do not let me put any credit card and said that I have some problem with a past charge bur wonr let me pay any way, so i cant down load anything please what can i do

go to this page and cotact iTunes store and they can help you out with this
https://expresslane.apple.com/Issues.action

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication.
I use LabVIEW to read the data from serial communication then, i open the example (.vi) from Serial Communication - Advanced Serial Write and Read from LabVIEW Example. BUT it have some error message that : Error - 1073807202 occured at property node in visa configure serial port (instr).vi -> advance serial write and read .vi
this error code is undefined. no one has provide a description for this code, or you might have wired a number that is not an error code to the error code input.
I don't know why? please help me. thank you.

When I copy that code into "Explain Error" I get: "VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded."
You may have a bad install of VISA or the wrong version of VISA loaded. Try re-installing VISA. You can get the latest version from the NI support site: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Also ensure that you are not pointing the example towards a serial port that does not exist.
Please let us know what you find and what gets this working for you.
Rob

Hi, I have a problem that I receive lots of Spam messages from my office, which are of no use for me. I am not in a position to bar the message from the service provider due to official constrains. I want to know if I can bar the message on Iphone

Hi, I have a problem that I receive lots of Spam messages from my office, I cannot bar the spam text from service provider due to official constrain.
I just want to know if there is any mechanisme where i can bar the message from a specific sender. I know there are some apps like Iblacklist available but we do not find it in any Iphone which is not jailbreak. I was just thinking of developing some code for it.

No. You can't. Filtering would have to be done at the server level.

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. i rang Applecare a

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.

Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name. I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name. I have also deleted the account entirely from my address book. I have have run repair permissions and also full defrag in iDefrag. Still the problem persists. Any suggestions?

Hello CarolineLongEaton,
I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
https://discussions.apple.com/thread/6116927
If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
dofromon

HT1937 my headphone have some problems ,but your Customer service staff cant solve the problem for me ,my iphone5s in within warranty period

apple inc:
              how are you . i am a buyer from chengdu city of china ,i bought the iphone5s in February ,2014. i have used five months ,suddenly ,my iphone5s have some problems with the headphone.the main cause is the sound of the headphone is becoming smaller and smaller ,then i took it to apple Customer service center to check it ,at last ,they told me that some liquid get into the headphone of my iphone5s ,i am very angery to hear that ,i havenever got liquid into the headphone,and my iphone never touch any liquid.so that they canot mend the iphone for me .
             this is the question what i meet now ,i hope you can give me a solution ,because the result is not made by me .i hope i can get your company reply as soon as possible.
                      thanks
              zhaolong
          chengdu city,in sichuan province ,in china
            phone:13540823419
            email:[email protected]

hi:
friend,thanks for your reply ,can you tell me how to contact apple inc sercer?i am looking forward to your reply
thanks

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
Any help please?
thanx

the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
try, on the end of that link, see if there's a space built into the page or the link when the page was made
On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night

Hi I have this problem that my iPad 4 stops connecting to the wifi at around 9:30 every night but my iPhone 5 and Mac mini still connects to the same wifi network I have called apple support and they had no clue what the problem is, have tried changing the http settings to auto and resetting the network setting on the iPad but no luck so far would appreciate any help thanks josh

One possibility is that there is an allowed time period for access programmed into your WiFi router for the MAC address of your iPad.
What make, model, and version WiFi router do you have?
Another possibility is that you are getting some WiFi interference from a nearby WiFi network which is automatically turning on at 9:30 PM. A nearby home security system could be the culprit.

HT2534 hii i am using iphone 3g mobile i have some problem in downloading free apps here is asking an credit card details so i want to download with out entering credit cards details and here i have there is not havening an option "NON"

hii i am using iphone 3g mobile i have some problem in downloading free apps here is asking an credit card details so i want to download with out entering credit cards details and here i have there is not havening an option "NON"

How did you create the account ? Unless you followed, exactly, the instructions on the HT2534 page that you posted from when creating an account then credit card details will need to be entered before the account can be used to download any item from the store.

I have some problems with element Panel Label and Message.

I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
BEST REGARDS

You can simply remove the label attribute for the input text on the page.
sid

I have some problems. That might be an understatment...

Similar Messages

Maybe you are looking for