I have some questions about the ios 7.1 security -what if they replace the sim ?

i khnow now that with the new ios 7 no one ever can format the iphone with itunes if the find my iphone is on in the iphone
but
1-what if they remove the sim and put a new sim?
can i still be able to track it with icloud and send messages to it and play sound and lock it with a passcode even if they remove the sim
2-what if they using an old version of itunes will they be able to format it as new iphone?
please answer each question both of them
i have iphone 4s with the latest ios 7.1

1-what if they remove the sim and put a new sim?
can i still be able to track it with icloud and send messages to it and play sound and lock it with a passcode even if they remove the sim
As I said, if there is a passcode in place they do not know, you will be able to track down the device, irrespective the SIM card they are using. By the way, if the device is locked, they should first unlock it in order to make their SIM work, calling the carrier and giving all your personal data they do not have.
On the other hand, if the phone is unlocked and does not have any passcode, then yes, they will be able to use any SIM with it and turn off any tracking software.
2-what if they using an old version of itunes will they be able to format it as new iphone?
Same as in previous: if they have the iPhone without any lock then yes, they will be able to restore it as a new phone.
Follow all the instructions here: http://support.apple.com/kb/HT5818 in order to turn on Activation Lock and make more difficult for them to restore your phone without permission.

Similar Messages

I bought my MacBook with the Apple Care Protection plan, and happened to scratch the bottom of my Mac. Will they replace the bottom of it for free?

I bought my MacBook with the Apple Care Protection plan, and happened to scratch the bottom of my Mac. Will they replace it for free? the bottom of the mac is were it got scratched

Didn't you read the warranty paperwork to know what's covered and what's not?

I'm going to Europe in a week and have some questions about charging my computer.

I'm going to Europe in a week. I know there is a built in power thing or something but do I have to change a setting on my computer or will it adjust automatically? And what kind of converter do I need to charge it/plug it in? Will the same one work for Prague, Paris, and London? I've tried doing some research but I just don't understand what I'm reading about different v and what kind to get. I found several adaptor things at the store but have no idea what does what or which one I need.
Also, how do I charge my ipod? Can the same charger work or do I need a separate one?
Thanks!
-Sarah

laundry bleach wrote:
The World Traveller Kit is way overkill for this. All you really need is a plug adapter for the area you are going - most of Europe uses the same plug shape. You can get a plug adapter at most hardware or electronics stores for a few dollars. I travelled to Holland, Norway and Israel last year and used such a plug adapter with my MacBook Pro.
Best of luck.
Sure, but the USB adapter is not universal. So when he buy the adapter for $29 from Apple, and $5 for the adapter you can buy the travler kit for just $5 more and get a) more adapters b) the USB cable c) the adapters could be attached directly to the supper supply's. But sure, you can get a simple adapter like that one.

I have some questions about the Zen Mic

I was wondering if the Creative Zen Micro has some of the same capabilities of the Apple Ipod. A lot of my friends have Ipods' and I know from them that you can actually plug the Ipod into a stereo and it will play songs. Can the Zen Micro do that? do you know of any connections needed? Also, i know the Ipod can get a connection which allows it to tune into blank radio stations. With this a person can get onto the same radio station through the Mp3 player and play their music, which allows them to play their Mp3 player in their cars or again on a stereo. Is there any way I can play my Zen Micro in my car without getting sperate speakers? Please help!
Thank you

You can connect to a home stereo using a stereo miniplug (your headphone connector) to RCA adapter. these are available at any electronics store. you plug the 2 rca plugs into an auxiliary input on your receicver. to play in your car, you can use an fm transmitter. check out my post on accessories, it talks about one i didnt like and the one i replaced it with...
http://forums.creative.com/creativel...essage.id=2079
there is nothing special about ipods, they cant do anything that a creative player cant. in fact, some would argue that creative's do more! but connectivity to any type of stereo system is uni'versal

Hello! I have some questions about after-sale service

hello I've bought a Mac pro in my jurney of US last winter holiday.and I'm back to China now. Unfortunately,there are some problems of my Mac.Were and how
can I fix it？and need I pay for it? whitch standard I woud have the American's or the China's? appreciate! I'm looking forward to your reply!
a China customers
PS:I lost the box of the Mac but I save the note on the box incloud the bar code

It may not be obvious but this site (Apple Support Communities) does not offer any official Apple product support. Your audience here is primarily other customers, & although Apple employees may respond to your questions, their advice is not warrantied to be accurate or complete.
That said, your warranty rights should be stated on a printed document that came with your Mac. You may also be able to find relevant info online by going to http://www.apple.com/choose-your-country/ & then selecting the country-specific http://www.apple.com/support/ page.

I have some questions about student versions of software.

I am creating a website for my business, and I need Photoshop CS2 and Dreamweaver 8 right now. But I know that CS3 should be out soon, and it will be Universal. If I get the student versions now, can I upgrade them or will I be forced to buy the versions again? What is my best option? Thanks.

For that you would need to ask the vendors.

Some questions about the integration between BIEE and EBS

Hi, dear,
I'm a new bie of BIEE. In these days, have a look about BIEE architecture and the BIEE components. In the next project, there are some work about BIEE development based on EBS application. I have some questions about the integration :
1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?
could anyone give some guide for me? I'm very appreciated if you can also give any other information.
Thanks in advance.

1) generally, is the BIEE database and application server decentralized with EBS database and application? Both BIEE 10g and 11g version can be integrated with EBS R12?You, shud consider OBI Application here which uses OBIEE as a reporting tool with different pre-built modules. Both 10g & 11g comes with different versions of BI apps which supports sources like Siebel CRM, EBS, Peoplesoft, JD Edwards etc..
2) In BIEE administrator tool, the first step is to create physical tables. if the source appliation is EBS, is it still needed to create the physical tables?Its independent of any soure. This is OBIEE modeling to create RPD with all the layers. If you build it from scratch then you will require to create all the layers else if BI Apps is used then you will get pre-built RPD along with other pre-built components.
3) if the physical tables creation is needed, how to complete the data transfer from the EBS source tables to BIEE physical tables? which ETL tool is prefer for most developers? warehouse builder or Oracle Data Integration?BI apps comes with pre-built ETL mapping to use with the tools majorly with Informatica. Only BI Apps 7.9.5.2 comes with ODI but oracle has plans to have only ODI for any further releases.
4) During data transfer phase, if there are many many large volume data needs to transfer, how to keep the completeness? for example, it needs to transfer 1 million rows from source database to BIEE physical tables, when 50%is completed, the users try to open the BIEE report, can they see the new 50% data on the reports? is there some transaction control in ETL phase?User will still see old data because its good to turn on Cache and purge it after every load.
Refer..http://www.oracle.com/us/solutions/ent-performance-bi/bi-applications-066544.html
and many more docs on google
Hope this helps

Some question about communicating the usb RAW device

I have some question about USB communication: I want to make my VI communicate
TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test
program writen by VC and a driver fold(with a .inf and a .sys files), when I
install the driver and run the test program, the driver program on DSP run
regularly. And then I want to program a VI which have the same function as the
test program, so I unload the driver on PC firstly, then install the DSP in
NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial -
Instrument Drivers". When I sent the standard control request using the VISA test panel, the status below happened. I don't know what wrong with my step.
Dev Phase Data                       Info           Time   Cmd.Phase.Ofs
15 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR 5.2sc        56.1.0
14 CTL    80 06 03 00 - 00 00 04 00 GET DESCRIPTR   11us        57.1.0
14 USTS   00 00 01 c0                canceled       2.0sc        57.2.0
15 USTS   00 00 01 c0                canceled         5us        56.2.0
PS: the software I use to capture the data is BUSHOUND
1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX?
2、Someone told me it must be done by calling .dll fies in LV, but I want to know if LV can program the function directly without calling .dll file?
Thank for any reply~~!

逍遥浪子 wrote:
I have some question about USB communication: I want to make my VI communicate TI-DSP by USB, now, the driver of USB on DSP have done, and there are a test program writen by VC and a driver fold(with a .inf and a .sys files), when I install the driver and run the test program, the driver program on DSP run regularly. And then I want to program a VI which have the same function as the test program, so I unload the driver on PC firstly, then install the DSP in NI_VISA according to "Using NI-VISA 3_0 to Control Your USB Device - Tutorial - Instrument
Drivers". When I sent the standard control request using the VISA test
panel, the status below happened. I don't know what wrong with my step. Dev
Phase
Data
Info
Time   Cmd.Phase.Ofs     ---
----- ------------------ 15
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR 5.2sc
56.1.0        14
CTL    80 06 03 00 - 00 00 04 00 GET
DESCRIPTR   11us
57.1.0        14
USTS   00 00 01
c0
canceled
2.0sc
57.2.0        15
USTS   00 00 01
c0
canceled
5us        56.2.0 PS: the
software I use to capture the data is BUSHOUND 1、Do I have to install the .sys driver file in VISA? How can I install the driver file without losing the device in MAX? 2、
Someone told me it must be done by calling .dll fies in LV, but I want
to know if LV can program the function directly without calling .dll
file?
This thread
contains already a related answer and explains what a sys driver is.
While you could theoretically use the Call Library Node to call all the
necessary Win32 API kernel functions to connect to a device driver,
this would be very cumbersome and not doable without a real good
understanding about C programming. Writing an interface DLL instead
won't need more C programming knowledge at all but will give you a
clean interface to that device driver which eventually could be used in
other programming environments as well.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Some questions about 4s the answers which i can`t find at now.

Hi all! I seen the manual, but have some questions.
Important for me:
Fonts notes - change except three in the settings?
The dialing buttons with one touch? Except now - "Phone - buttons"
Is there a group of contacts? On the sim card, I do not keep contact.
Can i rate a song in a standard player?
Can you give the name of the best player for FLAC format?
Sync photos in Itunes, indicates one folder, and you can specify all that are nested inside? so?
How do I know whether the information is sent (hidden) or packages gprs without my permission? At now I turned off not needed for me apps.
Can I change the capital letters on the keyboard in the messages to the normal small?
"Reminder" of the event calendar. Options: No, at the time of the event, for 5, 15, 30, for 1 hour, 2 hour .... 1 day, 2 days. Wow!? And where is the option for 3-4-5 hours? If I need it.
Too conglomeration and confusing menu Itunes. Intricate synchronization. I can not understand where to get my photos from my phone to PC (Win7 x64).
The battery is not recommended to fully discharge, right? It is better to charge when it near 20% or it`s don`t care?
Not quite clear things:
The maximum volume of the music can really mess up a rumor, it's amazing, you can limit the maximum mode in the settings, check with the monitor Senheiser HD215.
Free Appstore often not free or demo, ask for a fee, why mislead people is not clear!
Thank for answers!

Lawrence Finch Thank you very much for answers!
1-2. I am really forgot about apps in store. ))
3. It is strange that there are no groups in the phone, it's still a phone in the first place ))
4. I meant in the iphone. )) On the computer I have many years using a different program for music.
5. Hmm... flac is not video format.
6-7. Ok
8. I am talking about standart letters on the keyboard in the messages. Visually, they look like big letters, that I first met in the phone. In small letters ordinary phone as long as you do not choose a large and they vary in height.
9-10. Ok
11. ???
The battery is not recommended to fully discharge, right? It is better to charge when it near 20% or it`s don`t care?
Not quite clear things:
12. I checked the maximum volume with my Senheiser HD215 and it`s a very very loud. What is strange that you can limit the maximum volume mode in the settings. This maximum volume limit seems to me strange.
13. Ok. But I was faced with a situation where there is an update itunes says, and as detailed a description of the program, but not a change in her. Strange.

Some questions about configuration in MAX.

Hello,everyone!
I have some questions about configuration in MAX(I am a jackaroo for motion control development),I hope I can get your help.
I use PCI-7344+UMI-7764+Servo amplifier+Servo motor,my MAX version is 4.2 and I use NI-Motion7.5
My question as following:
1,In Axis Configuration,for motor type,why I must select stepper but not servo?my motor is servo motor!If I select Servo,my motor can't run,I don't know why.
If I select stepper,though motor can work but I can't test encoder in MAX.
2,In Stepper settings,for stepper loop mode,why I must select open-loop but not close-loop?If I select close-loop,the servo motor doesn't work too.
3,If I want my two servo motors run at different velocity,How shoud I do?It seems I just can set the same velocity in MAX for my two servo motors.
My English is poor,Pls pardon me!I come from China.
Thank you for your help!
EnquanLi
Striving is without limit!

Hi,Jochen,
Thank you for your kindly help!
The manufacturer of the drive and motor that I am using now is Japan SANYO DENKI,drive type is RS1A01AA,motor type is R2AA06020FXP00.
And I use position control mode,thehe encoder's counts per revolution is 131072.I set the electronic gear ratio to 1:1 for drive.
Now,I can use Close-Loop to control the motor but still has some problems.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.When I configure it to run in closed loop mode, the motors behave strangely and never move to the target position.The detail situation is as following
1,Motor can't run.
2, Or motor moves to a position, then moves in the same direction agian and eventually stops.
Except for the two points mentioned above,"Following Error" is occured frequently,I don't know why.
I am still not clear why I must set the motor type be stepper in MAX .
And I have another question:what the relationship between the steps and the counts?They have the proportion relations?I notice that there are a section said like this in help document: For proper closed-loop and p-command operation, steps per revolution/counts per revolution must be in the range of 1/32,767 < steps/counts < 32,767. An incorrect counts to steps ratio can result in failure to reach the target position and erroneous closed-loop stepper operation.
I am verry sorry I have too many questions!
I am very appreciate for your kingly help!Thanks again!
EnquanLi
China
Striving is without limit!

Some questions about javacard 2.1.1 and smartcardio

Hello i have some question about java card 2.1.1 and the smartcardio package.
1.) I want to sign a message with the Signature.ALG_RSA_SHA_PKCS1 algorithm. I use the following code in the applet to sign the message:
final static byte P1_CREATION_MODE = (byte) 0x01;
final static byte INS_SIGN_MODE = (byte) 0x60;
final static byte SmartCard_CLA = (byte) 0xB0;
private void signMessage(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        byte byteRead = (byte) (apdu.setIncomingAndReceive());
        signature.init(privateKey, Signature.MODE_SIGN);
        short length = signature.sign(buffer, ISO7816.OFFSET_CDATA, byteRead, buffer, (short) 0);
        apdu.setOutgoingLength((short) length);
        apdu.sendBytesLong(buffer, (short) ISO7816.OFFSET_CDATA, (short) length);
        apdu.setOutgoing();
    }On the host side I use the following code to connect to the card and to send the sign apdu:
if (TerminalFactory.getDefault().terminals().list().size() == 0) {
            LOGGER.log(Level.SEVERE, "No reader present");
            throw new NoSuchCardReader();
        /* Select the first terminal*/
        CardTerminal terminal = TerminalFactory.getDefault().terminals().list().get(0);
        /* Is a card present? */
        if (!terminal.isCardPresent()) {
            LOGGER.log(Level.SEVERE, "No Card present!");
            throw new NoSuchCard();
        /* Set the card protocol */
     Card card = terminal.connect("*");
        ATR atr = card.getATR();
        LOGGER.fine(getHexString(atr.getBytes()));
        LOGGER.fine(getHexString(atr.getHistoricalBytes()));
        CardChannel channel = card.getBasicChannel();
        CommandAPDU cmd = new CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, new String("datadatdatadata").getBytes(), (byte) 0x40);
     ResponseAPDU response = channel.transmit(cmd);
        card.disconnect(false);But this does not work and i got the following error
javax.smartcardio.CardException: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:202)
        at sun.security.smartcardio.ChannelImpl.transmit(ChannelImpl.java:73)
        at de.upb.client.smartmeter.SmartMeter.initSmartCardApplet(SmartMeter.java:114)
        at de.upb.client.smartmeter.SmartMeterApplikation.main(SmartMeterApplikation.java:39)
Caused by: sun.security.smartcardio.PCSCException: Unknown error 0x8010002f
        at sun.security.smartcardio.PCSC.SCardTransmit(Native Method)
        at sun.security.smartcardio.ChannelImpl.doTransmit(ChannelImpl.java:171)
        ... 3 more2.) 3Des encryption
I want to use the 3Des algorithm to encrypt my data. I use
keyDES = (DESKey) KeyBuilder.buildKey(KeyBuilder.TYPE_DES,
                    KeyBuilder.LENGTH_DES3_2KEY, false);
cipherDES = Cipher.getInstance(Cipher.ALG_DES_CBC_ISO9797_M2, false);But i do not know what is the aquivalent on the host side??
3.) Another problem is that i am not able to send the modulus of a public key from the host applikation to the smard card
new CommandAPDU((byte) 0xb0, (byte) 0x20, (byte) 0x01, (byte) 0x00, modulus.toByteArray()); // create the apdu
// the method in the applet
private void setServerKeyMod(APDU apdu) {
        byte[] buffer = apdu.getBuffer();
        try {
            byte byteRead = (byte) (apdu.setIncomingAndReceive());
            short off = ISO7816.OFFSET_CDATA;
            // strip of any integer padding
            if (buffer[off] == 0) {
                off++;
                byteRead--;
            publicKeyServer.setModulus(buffer, off, byteRead);
        } catch (APDUException ex) {
            ISOException.throwIt((short) (SW_APDU_EXCEPTION + ex.getReason()));
    }The error code is 6700
4.) My last problem ist, that i am not able to use a value bigger than 0x7F as the ne field in the apducommand, because i get the following error
CommandAPDU((byte) 0xb0, (byte) 0x60, (byte) 0x01, (byte) 0x00, data, (byte) 0xff);
java.lang.IllegalArgumentException: ne must not be negative
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:371)
        at javax.smartcardio.CommandAPDU.<init>(CommandAPDU.java:252)I thought that it this should be possible in order to use all the bytes of the response apdu.
If you need more code to help please let me know.
Cheers
Edited by: 858145 on 06.07.2011 08:23

2) What is PKCS? what is the difference between
PKCS#11 and PKCS#15??PKCS is the abbreviation of "Public-Key Cryptography Standards"
PKCS #11: Cryptographic Token Interface Standard
See http://www.rsasecurity.com/rsalabs/node.asp?id=2133
PKCS #15: Cryptographic Token Information Format Standard
http://www.rsasecurity.com/rsalabs/node.asp?id=2141
If you want to use yor smartcard as secure token it doesn't have to be a JavaCard.
BTW: I don't remember a way to access PKCS#15 tokens on a JavaCard from within an oncard JavaCard program. If you want to use keys in your oncard program, you have to transfer it onto the card or generate it oncard and export the public key by your own oncard/offcard code.
Jan

Some question about Cisco Prime Infrastructure

Dear all
I have some question about using Cisco prime Infrastructure:
- Can I show how many user access to one Access Point (AP) ?
- If I can. What is display information of user ? etc Ip address, MAC, username access, name of device (notebook, tablet, phone ..)
- How many time do Cisco Prime Infrastructure refesh user informantion .?
Please help me and send picture about it if you can.
Thank you so much.

Hi,
I don't have the Prime Infrastructure to post you image, but you can simply find all the answers you want on the config guide:
http://www.cisco.com/en/US/docs/wireless/prime_infrastructure/1.2/configuration/guide/clientmgmt.html#wp1232242
1- You can surely find how many clients associated to a specific AP.
- Informaiton of the client usually includes username, SSID, ip address, mac address, RSSI, device vendor...etc. I don't think it contains the device type (ipad or iphone both appear as apple vendor. it does not destinguish between this and that.
3- The time of the refreshment is configurable. You need to configure the corresponding background task for the poll period. (this is also metnioned in the link above).
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Some question about georaster?

Hello,
I have some question about how to create high efficiency georaster model. I have 3T capacity raster data. It's bands is from 8 bands to 12 bands and the resolution is 0.5 meter. In order to ensure the original information of raster data, I consider not use the SDO_GEOR.mosaic, this means that a import file is a georaster object. I keep the original data capacity, not compression. I use JPEG-B to compress pyramid data.
Does anyone can tell me my georaster model is OK? or tell me some areas for improvement.
Thanks who have lool my page.

i don't have specific performance number on georaster using bigfile tablespaces. "A bigfile tablespace with 32K blocks can contain a 128 terabyte datafile" and should be doable with georaster in considering your data size is just 8 TB. It should have some advantages over small file tablespaces, for example, it would be easiler to manage because it has only one datafile. but note, "Bigfile tablespaces are intended to be used with Automatic Storage Management (ASM) or other logical volume managers that supports striping or RAID, and dynamically extensible logical volumes". "Using bigfile tablespaces on platforms that do not support large file sizes is not recommended and can limit tablespace capacity." please refer to the Oracle Database Administrator's Guide.
thanks

Some Questions about NI-6602

Hello!!
I have some question about NI-6602.
1.What is the difference between Port and Line ?
What's the difference of Line nad Portin these functionIG_In_Line,DIG_Out_Prt,DIG_Line_Config,DIG_In_Prt,DIG_Out_Prt,DIG_Prt_Config
2.If I would like to apply gate to my counter application, is it possible that we give the gate signal via software?
Or I need to connect signal from hardware? If hardware is needed, is it possible to apply another counter's output as my counter's gate input?
3.Can we apply gate to this fuction ND_PULSE_TRAIN_GNR?
4.Can we detect the counter's source is High or Low ?Is there any fuction to read out the source status?

Hello,
Thank you for contacting National Instruments.
"1.What is the difference between Port and Line?"
A Port is a collection of lines. Usually 8 lines to a port.
"What's the difference of Line nad Portin these function DIG_In_Line, DIG_Out_Prt, DIG_Line_Config, DIG_In_Prt, DIG_Out_Prt, DIG_Prt_Config"
These functions either perform an output or input, or configure your digital ports and lines. Please see the Traditional NI-DAQ Function Reference Help found under Start >> All Programs >> National Instruments >> NI-DAQ >> Traditional NI-DAQ Function Reference Help for more information on these functions.
"2.If I would like to apply gate to my counter application, is it possible that we give the gate signal via software? Or I need to connect signal from hardware? If hardware is needed, is it possible to apply another counter's output as my counter's gate input?"
You can apply a gate signal from software. For example you can use the 6602's Timebase to gate your counter during pulse measurement applications. You can also route a counter's output to the gate of another counter internally. Look up Select_Signal in the Function Reference Help for more details.
"3.Can we apply gate to this function ND_PULSE_TRAIN_GNR?"
I am not sure what you are asking here. ND_PULSE_TRAIN_GNR is a parameter used in the GPCTR_Set_Application function to set up a counter for pulse generation. Please see the page titled "application = ND_PULSE_TRAIN_GNR: GPCTR_Set_Application" in the Function Reference Help more more information about this parameter.
"4.Can we detect the counter's source is High or Low ?Is there any fuction to read out the source status?"
There is no function to read the state of the source pin. You will need to route the source pin to a PFI line and perform a digital read on that line.
I hope this answers your questions. Please feel free to reply if you have any further questions.

HT2506 Hello guys, I have a question about Preview - How do you loop a slideshow?

Hello guys, I have a question about Preview - How do you loop a slideshow?

Had the "loop" feature using Preview in 10.4.11; upgaded to 10.5.8 and it's gone. Don't you have to work at "Taking" it away? Makes no sense. Now you have to look for a third market for something that was included in Preview since the first version was launched. ....I don't get this one.

I have some questions about the ios 7.1 security -what if they replace the sim ?

Similar Messages

Maybe you are looking for