I have squished up text when I export a picture book to epub. Why??

So, I have a picture book, all pretty and laid out for CreateSpace. I create pdf's for createspace all the time, they are all fine, this one isn't any different. But now I'm trying to make an epub version.
I've exported it to epub, for a fixed layout, it looks wonderful, except for a few words on each page are all squished in..... like the letters on one word in a paragraph are all stacked on top of each other.
I am a just teaching myself this program, so I've most likely set something up wrong in my original file, I would imagine. So, treat me as stupid, and please oh please someone help me through this? I'm using InDesign CC. Not sure what other info you'd need to know.
Thanks thanks thanks for any help at all!

Moved to InDesign EPUB forum.
Reader support for FXL EPUB is quite limited right now. Test it in iBooks or Readium for Chrome.

Similar Messages

  • I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...."  How do I fix this?

    I have LR 5.  When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action.  Please install a program, or if one is already installed, create an association in the Default Programs control panel."
    How do I fix this?

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • How can I keep my keywords when I export my pictures to a disc

    How can I keep my keywords when I export my pictures to a burn disc. i am working in iphoto 8

    margj
    The keywords are written to the IPTC data of the file. The Finder doesn't read this but other photo apps will.
    If you want to confirm the keywords, examine the pics with Graphic Coverter.
    What are you trying to do here? Back up your Library?
    Regards
    TD

  • RTF inccorect text when I export my Crystal Report to PDF

    Hello,
    I'm facing a quite unusual problem.
    I've developped a VB.NET 2008 application for my customer that creates Crystal Reports from manually-entered text.
    There's a part where the user can enter RTF text in a RichTextBox control, or import from a RTF File.
    Here's what I do :
    I'm typing a three-lines example in Word 2007 and save it in RTF.
    Then I import it in my application into the RichTextBox.
    When I display the report, everything looks fine, but when I export it to PDF, "i" letters are inserted after each "t" letter.
    It looks like it appears only after a "bold"-ed text. Here's and example:  [http://screencast.com/t/31t4X86XBs3]
    I'm using CrystalReports Editor Included in Visual Studio 2008.
    Has anyone already encoutered that issue ?
    Regards,
    Guillaume

    See [this|https://forums.sdn.sap.com/click.jspa?searchID=29094456&messageID=7206473] forum thread for possible clues to a resolution. In a nut shell, as long as the Calibri font is up to date, the other two steps are;
    1) Ensure you are using the latest Service Pack as suggested by Jonathan
    2) See what USP10.dll is loading (use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility)
    Also, if this is a win app, compile it to an exe and run the exe to see if the issue persists. (when running the app exe, the USP10 loaded should be from the CR bin directory. when running ion the .NET environment, the USP10 will load from win\system or other)
    Ludek
    Edited by: Ludek Uher on Jul 16, 2009 10:57 AM

  • Jaggy text when I export to DVD

    My keynote presentation looks perfect in Keynote. I have a title that uses the font "Mona Lisa Solid". The title looks perfect in Keynote. When that text is black, it looks perfect. When it's red, it's jagged. any suggestions? My title has black and red text.

    >and encore i don't have
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
    The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173 (picture first posted by Ann Bens and reposted by Stan Jones)

  • I have an ipad2 I bought scrabble  a day ago played all my Facebook friends for 1 day and now it won't open, I have the app but when I click on face book friends....nothing!!!

    I bought an ipad2 bought scrabble app worked for 1day and now app won't work????

    Have you tried closing the app completely and seeing whether it works properly when you re-open it ? From the home screen (i.e. not with the scrabble apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • When I export my Indesign document to an epub why is the first image smaller than the rest?

    All of the images are intended to be full page, and appear so in Indesign, however when I export the document to an epub, and view it on the iPad, the first image displays at about half the size of the other images.
    When creating the images in photoshop I ensured that they were all the same size and have not had this problem with any of the other epubs that I have made so far. Am I missing something? Any advice would be gratefully received! I work for a very small not-for-profit organisation that publishes books for people with learning disabilities and we are still feeling our way when it comes to producing ebooks!
    Thanks in advance,
    Hannah

    HI Hannah,
    May i know what are your cover page settings while exporting...?
    Is your document facing or non facing pages.
    Hope there are no size related settings done to the first image in Object Export Options under objects sub-menu.
    Because these are the prime settings that can affect it somehow.

  • 16:9 with added effects becomes 4:3 when I export it.

    I have recorded some footage in 16:9, imported it in iMovie HD, edited it, added some effects, and now I´m trying to export the project to my camera. The problem is only that the parts where I have added an effect turns into 4:3 once I export it. The parts where I haven´t added an effect are still 16:9, which means it switches between 16:9 and 4:3 in the same project. In iMovie it is all 16:9, but obviously something goes wrong when I export it. Does anybody know why?
    I´ve also tried to make a quicktime file from the same project, and in this case the whole project turns into 4:3 - at least that´s how it appears when i play it in quicktime or VLC, for that matter. Any ideas what I could do to keep it 16:9?

    Welcome to the  Discussion Forums.
    There are no effects in im08 and suspect you are using an earlier version of imovie. You might get a better response if you post in the appropriate forum.

  • No table of contents when IBA exported to iPad

    When I export an iba book to iPad there is no table of contents or it is spread out with one chapter head per page?

    Hello GWBARN,
    Are you able to provide any screen shots of your IBA file so I see what is happening.
    I include two screen grabs here.
    When you highlight a chapter and then select the Table of Contents section above the Chapters you will see it will only display the Table of Contents for that chapter selected.
    Every section in that chapter will be added automatically to your table of content (TOC).
    So if you don't have any sections within your chapter and are adding pages you may not see and items then in your TOC.
    I hope this helps a little, get back in touch to see what we can help with.
    Regards,
    Nigel
    THE TOC FOR THE INTRODUCTION
    THE TOC FOR THE NUMBERS CHAPTER

  • How do I export iPhoto pictures to a Scandisk in the order I placed them?

    How do I export iPhoto pictures to a Scandisk in the order I placed them?

    Do I understand correctly? You've manually arranged the photos in an Album, and you wan to have the same arrangement when you export?
    Select the pics in the Album and then Photos Menu: Batch Change -> Set Title to Text "John's Birthday", for instance, and tick the box to append a number to each Photo. Now your photos are titled 'John's Birthday 001, John's Birthday 002 ... etc'
    Then File -> Export and in the Export dialogue set the Filename to "Use Title"
    Sort on Filename in the FInder and you end up with a folder full of images in the same order as the Album in iPhoto.

  • Noise problem when I look at pictures in full size (or smaller) on monitor. If I enlarge pictures the noise is gone. ??? Can somebody help? Thank you

    I have a noise problem when I look at pictures in full size (or smaller) on monitor. If I enlarge pictures the noise is gone. ??? Can somebody help? Thank you

    How useful screenshots might be in illustrating an issue pertaining to the screen display in comparison to a merely verbal description!
    Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
    What are your Performance Preferences?
    Please read these and proceed accordingly:
    Best practices: Usage | Adobe Community
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays.  I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen.  When i export from

    I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays.  I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen.  When i export from lightroom slideshow and choose the 1920x1080 resolution the end product is a very small video in the middle of a black background.  i have double checked and do not have any borders turned on.  Another option would be to export from the library but lr mogrify does not seem to put text overlays on video either.  Any input would be welcome.

    I dont understand anything you said in your post.
    Do you have a specific question about video production?
    The forums are for individual technical or creative issues that users have with video production. I am sur someone will be able to help you, but and to get a response it is best to ask a specific question.
    Is this about a technical problem you have or something about setting up a web site? If its the latter this is the wrong forum.

  • When I export my file to generate a .pdf, the text box literally has a box around it! How do I make that line disappear?

    When I export my file to generate a .pdf, the text box literally has a box around it! How do I make that line disappear?

    Sounds like you have a stroke on it. Select the frame and set the stroke to none.

  • Can't select text when export in HTML and Images

    I am entirely new to Fireworks and I can't find anyone to teach me Adobe Fireworks. I followed some youtube tutorials but most of them are vague. I am still figuring the way to export from Fireworks to Dreamweaver, without affecting its contents like bitmap images and the text. When I export in HTML and Images format and opened the htm file, I can't select the text I've inserted in Fireworks. Can anyone tell me what I should do?

    I cant scroll below or above viewable section of text in any of my Macbooks, iMac, Mac Mini. Never have been able to, never could, except by pressing the arrow keys whilst selecting, to move up or down.
    Its stupid
    I dont have flash installed (never will do since my first virus of video ad sound running in background from Cnet was downloaded and kept returning until i deinstalled flash).
    I believe that this is a universal issue because none of my Macs can scroll out of screen when selecting text, which as a webmaster and developer, is a pain in the butt
    My issue is not in word documents, its in everything

  • In motion2  when I export quicktime the text comes out blurred

    I recently upgraded fcp 4.5 to 5 and DVD studio Pro 3 to 4 and I have Motion 2.
    When I created an motion menu in Motion the text looks crisp but when I export it to either fcp or dvd studio pro the text becomes distorted. Is there something in the setting I forgot when I export. Can anyone advise.
    Thanks
    Ed
    g5 dual processor with external drive   Mac OS X (10.4.2)  

    Don't export it as a DV QuickTime movie.
    If you want to take it into FCP, you can take the native project file.
    If you want to take the finished Motion project into DVDSP, export out of Motion 2 using Compressor and use the DVD MPEG2 presets.
    I use the DVD Best 120 Minutes preset and it works great.
    There's no point in exporting it out as DV only to reencode it into MPEG2, which is required for DVD.
    But if you ever have to export out of Motion 2 to bring into something that can't take the native project file, I export out using the Animation codec, not DV. Animation is lossless and it will give you a very clean movie to bring into something else.

Maybe you are looking for