I have sync linked to my main laptop. I recently wanted to merge my secondary laptop bookmarks with my main laptop bookmarks and when I linked my secondary, the stupid sync feature overrode all the bookmarks I had on the secondary! WHYYYYYY??!!!!!!!! ~ :(

I have sync linked to my main laptop. I recently wanted to merge my secondary laptop bookmarks with my main laptop bookmarks and when I linked my secondary, the stupid sync feature overrode all the bookmarks I had on the secondary! WHYYYYYY??!!!!!!!!!!!!!!!!!!!!!!!!! ~>:(

Sync creates a backup before it does anything -> you can restore from the backup -> http://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks

Similar Messages

  • Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been usin

    Help! We have a form with more than 200 entries and when I looked at it yesterday it had one! When you download the form to excel they all show up. However, when I added another record today it disappeared. Can you tell me what's happening? I've been using adobe forms for 2 years with mass response feedback and have never had this problem.

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • My computer crashed and I lost everything. It was the only computer with Sync on it and I cannot get my recovery key: how can I get all my bookmarks from that Sync account?

    My computer crashed and I lost everything. It was the only computer with Sync on it and I cannot get my recovery key: how can I get all my bookmarks from that Sync account? I have a ton of bookmarks/saved password and the only way to get on sync is create a new recovery key and lose all of my information.
    Is there any way to get my stuff back without creating a new recovery key and losing all my old stuff?

    It has always been very basic to always maintain a  backup copy of your computer for just such an occasion.
    Use your backup copy to put everything back.

  • Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as develope

    Good morning friends, I have a problem with my iphone 4s since I get a screen that just light it says "Activation Required" restored it and not corrected, I bought my factory unlocked iphone, how I can fix this, I had installed the version 6.0 as developer to

    If you have a beta copy of iOS6
    1. You are a developer and will know how to transition from beta
        to release version and to use the Develpoer forum
    2. You have a pirate copy of the beta and no-one on this Apple hosted Forum can help you
         try Google

  • I made an iMovie project with a bunch of stills and when I came back later today they had turned black like they weren't there. What's with that? How's the best way to fix it?

    I made an iMovie 10.0.4 project with a bunch of stills and when I came back later today they had turned black like they weren't there.
    Like this:
    When I play them they're black as well.
    Normal Still:
    "Missing" Still:
    What's with that? What's the best way to fix it?
    Thanks.

    Hi
    Magic solution - NO
    Some thoughts - YES
    Is the iPhoto Library still where it was previously (or on external Hard Disk - now turned off) ?
    One approach might be to - Repair iPhoto library (but this takes hours - so try below first)
    Trouble-shooting guide
    When iMovie doesn't work as intended this can be due to a lot of reasons
    iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    Creating a new User-Account and log into this
    This forces iMovie to create all pref. and cache files new and error free
    Event or Project got corrupted - try to make a copy and repair
    a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
    version miss match of QuickTime Player / iMovie / iDVD
    preferences are wrong - Repair Preferences
    other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    USB-flash-memories - usually do not work
    Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
    iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
    This You do by
    First -  close iPhoto
    Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
    Thirdly - now select all five options presented
    THEN - WAIT a long long time (>20 hours are not strange)
    free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    Screen must be set to million-colors
    Third-party plug-ins doesn't work OK
    Run "Cache Out X", clear out all caches and restarts the Mac
    Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • HT204053 I have an iPhone 4S and when I try to add an iCloud account is gives me an error "Cannot Sign In, The maximum number of free accounts have been activated on this iPhone." Is there any way to deactivate an account?

    I have an iPhone 4S and when I try to add an iCloud account is gives me an error "Cannot Sign In, The maximum number of free accounts have been activated on this iPhone." Is there any way to deactivate an account? I have one for myself, one for my family and one for my work. I had all three on my iphone and then I deleted my work. I wanted to get my own person @me.com account. It wouldn't let me create it from my iphone, so I created it from my Macbook Pro. I am trying to add it to my iphone, but it keeps giving me that error. If there is a way I can deactivate my work one so I can use my @me.com personal account?

    Welcome to the Apple Community.
    Unfortunately once all the 3 iCloud accounts have been created on your mobile device, you cannot create any more regardless of what you do. You will need to re-use one of the accounts that you have already created or create your new account on another device or computer.
    You should however be able to add existing accounts to your device, are you sure you aren't trying to create on rather than simply use an existing one.

  • I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

    I have Iphone 4 it was work fine in my country (bahrain) i went to UK and i change sim card to O2 and when i came back it doesn't work in my country i think because i update the carrier in Uk its my carrier now 10.0 and the others in my country is 9.0

    We had the same problem, but figure out the solution.
    You MUST have at least 1 song added to your ITUNE!  After you add a free song, then everything else should work as normal!
    Hope this helps!

  • I synced my iphone 3 to my pc and i had about 90 songs on it and when i looked at my phone to check if it worked, it deleted about 80 of the songs, what happened to them and how do i get them back

    I synced my iphone 3 to my pc and i had about 90 songs on it and when i looked at my phone to check if it worked, it deleted about 80 of the songs, what happened to them and how do i get them back

    You might have better luck in the iPhone community. I'll ask the hosts to relocate your post.
    iPhone community
    Have you tried syncing the iPhone to your computer and restoring from the backup to see if you can get your other songs back? If you purchased the new album with your Apple ID, you should be able to download it to your computer to sync.

  • The Cube should refers to all leaf levels of hierarchies of the Dimension

    Dear All,
    I'm trying to link a fact table to the month level of a time dimension and i got the following error
    VLD-0398: The Cube TIME_TEST_CUBE does not refer to leaf/lowest level DAY of the dimension SINGLE_HIR_TIME.
    The Cube should refers to all leaf levels of hierarchies of the Dimension.
    would you please help me to solve this problem
    Regards,
    Shaimaa

    I realized that this feature is allowed only for MOLAP dimensions but not for ROLAP
    which exactly the opposite of what is mensioned in
    Oracle® Warehouse Builder
    User's Guide
    10g Release 2 (10.2.0.2)
    B28223-03
    in page 116
    " For a cube that uses a relational implementation, you can refer to intermediate
    levels in a dimension. However, for cubes that use a multidimensional
    implementation, you can only reference the lowest level in the dimension. "

  • Closed a logic pro x project and when asked to save i said no did i lose all i did or is there a way i can recover the files??

    Closed a logic pro x project and when asked to save i said no did i lose all i did or is there a way i can recover the files??

    Your only parachute would be Time Machine (if you have it running).
    Logic's Auto Save feature doesn't help you at that point because that data is reset if you close the Project (or save the Project). However, the recorded audio files should be still in the Projects File (inside the Media folder of the Package File).
    My guess is that this is actually a bug because it leaves orphan files behind that cannot be accessed from the Logic Project itself.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show a

    I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone

    Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

  • Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.  I can CREATE the list but, the songs that I have played don't accumulate in the list.  I haven't changed the steps that worked for me previous to the upgrade.  I have no idea

    Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
    I can CREATE the list but, the songs that I have played don't accumulate in the list.
    I haven't changed the steps that worked for me previous to the upgrade.
    I have no idea how to fix this and can't find mention of anyone else having a similar problem.
    Any suggestions?

    Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
    tt2

  • Iphone 4s i have made my update to ios 7.04 and when i send are receive a message text are a call of one of my contact, the contact is automaticaly deleted !!! Somebody know why ita frustrating

    Iphone 4s i have made my update to ios 7.04 and when i send are receive a message text are a call of one of my contact, the contact is automaticaly deleted !!! Somebody know why ita frustrating

    Post in your native language, the above makes no sense.

  • [svn:fx-trunk] 12878: When sub-components don' t have a tabIndex and when VideoPlayer instance does, assigned tabIndex to each inner-component to ensure that they appear in the correct tab order with other components on the stage .

    Revision: 12878
    Revision: 12878
    Author:   [email protected]
    Date:     2009-12-11 19:07:40 -0800 (Fri, 11 Dec 2009)
    Log Message:
    When sub-components don't have a tabIndex and when VideoPlayer instance does, assigned tabIndex to each inner-component to ensure that they appear in the correct tab order with other components on the stage.
    QE notes: none
    Doc notes: none
    Bugs: n/a
    Reviewer: Gordon
    Tests run: checkintests
    Is noteworthy for integration: no
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/spark/src/spark/accessibility/VideoPlayerAccImpl.as

    Michael,
    "Michael Caughey" <[email protected]> wrote in message news:413f0af6$1@mail...
    If I'm doing something wrong what is it? Obviously there is something
    different about how I configured my environment a year ago.What happens if you bring down ms02?
    Regards,
    Slava Imeshev

  • My iphone is in recovery mode and when i try to restore it, its doesn't go all the way threw the happen right after i try to upgrade my phone. what do i do HELP ME!!!

    my iphone is in recovery mode and when i try to restore it, its doesn't go all the way threw this happen right after i try to upgrade my phone. what do i do HELP ME!!!

    Hi, are you doing it through Settings or via iTunes? If doing it through Settings, try plugging it in via USB and updating with iTunes. Hope this helps.

Maybe you are looking for

  • In iTunes, I received a message that a file could not be read but when I play it on my computer it works fine.

    I am trying to download an album for my kids onto my old (3G) iphone.  All other songs/albums work fine.  This one says it can't be read. Thanks for your help.

  • Retraction with transaction FMCYCOPI_BW

    Hello Gurus. I want to retract information to FM-BCS, but the time of execution is very long, some of you used to this transaction and have solved the problems you have in terms of performance and runtime. Best regards. Noé Méndez

  • Configuration of ping using SNMP rw on Cisco devices

    Hello, the customer would like to use SNMP RW access for configuration of ping on Cisco devices. He wants to use ping with the following parameters: destination address, length, number of packets and with DF bit set (it is very important for our cust

  • Distinct Value

    Hi All, I have one table having 36m record. I have below query. Need is distinct value for all 10 columns and those column are not part of Index. Query is taking long time to finish. Please help me on this. Select Col1.Col2, col3 .....Col10 from myTa

  • Major External USB Disk problem

    I noticed today that an external drive I have had connected to my MacBook Pro for several months seemed to have no data on it. While showing no files or folders in the Finder view, it showed that only 222GB or so was still free though the drive is a