I have the "battery guage jumps all over the place" issue, is it 3.0.1?

I have the issue with the battery guage jumping all over (I have been as high as 77% and as low as 42% in the last 15 minutes)
is there a consensus as to if his is a 3.0.1 issue or a hardware issue? The run time still seems ok, but it can be stressfull not knowing if you have 30 minutes of battery or 3 hours, when you are away from a power source. The issue has kept me from using my phone too much lately which certainly limits the usefullness of the phone.
I did not have the issue with 3.0 but also didn't have the issue with 3.0.1 for the firt 3 weeks I had it.
I have fully drained an charged the battery twice in an attempt to recalibrate it, not in anyway effective.
Any help or suggestions are appreciated.
Message was edited by: Kalel

Kalel, I had the same problem with my black 3 GS.
I got it on the day it was launched here in germany. All the time no problems. Updated to 3.0.1 as soon as it was released. No problems for a bunch of weeks.
Then, one day the battery was completely run down over night from 56%.
After a 100% charge I had jumps in the battery status as you reported about it.
I went to a T-Mobile-Store and got a new SIM-Card. Didn´t help. Then I made a restore to new phone. And I didn´t installed the Facebook App again. As this was the only thing I changed before the problem occured; an update of the facebook-App.
Since then I didn´t had the problem. Sometimes the battery goes up for 2-3%. For example I look for new SMS, and it´s 80%. I check again ten minutes later and it´s down to 78%. Then it might be 5 minutes later back to 80%. But that happens only sometimes. Let´s say one or two times a day.
So far the battery-jump-problem seems to be solved in my case. I don´t reach the 300 hours standby as by Apple mentioned. I would be VERY glad to reach 150 hours. But I never reached this times. I don´t know. Perhaps I call the Apple Service and talk to them.

Similar Messages

My iPhone 5 has really sporadic battery percentage that jumps all over the place and every so often the phone turns off

Hi guys!
I'm having trouble with my iphone 5, the battery percentage jumps all over the place. It will be down at 14% and then I plug the charger in and it jumps to 50%, it jumps around without me plugging the charger in. Today it actually turned off twice and had the red icon to plug it in and when I plugged it in it had turned straight on and was at 27%.
Any ideas what could be causing this? Its really annoying because when I'm out I'm not really able to rely on the battery indicator being correct.
Any help would be greatly appreciated :)
Russell

Hi Boris,
That sounds really similar! I'm not sure what to so about it, I bought a mobile battery pack to charge my phone while I'm on the go as this seems to make the percentage instantly jump back up again. If I don't get any ideas on here ill probably take it in to an apple store and see if I get any joy there. I'll let u know the outcome if I do go to a store, maybe I can at least buy one at a reduced rate or something. I got my iphone 5 on the day of release so I'm outside warranty too :(

Does anyone know why my mouse cursor jumps all over the screen at times?

Does anyone know why the mouse cursor jumps all over the screen at times, especially if I am playing solitare? Is it Yahoo games or my Apple?

Is this a Magic Mouse you're talking about?
If so there's already discussions about this here and maybe related to it, here. Also google something like "jumping magic mouse" and there's no end of discussions on this topic

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

Help! My Mouse pad is not working properly. The arrow cannot be controlled, it just keeps jumping all over the page. How can I stop this?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and in that case the unit must be serviced or replaced.
3. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
4. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
5. Reset the System Management Controller.
6. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
7. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

Why is my page or connection jumping all over the place after my recent update to firefox 5.0

I came back from a week away and when I got on the internet firefox had updated to 5.0 and ever since then my pages just jump all over the place Why?

Hi Aish,
I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
Can you please get back to me with an answer to this? I would be very greatful!
Marc.

Why is the webpage jumping all over the place with parallax scrolling?

Hi all, I'm getting a little frustrated here... I've built a looooong (10,200 pixel) parallax scrolling site, when I click 'Preview' it plays like a dream, but when I render the HTML, view in browser or publish to business catalyst to view, it just jumps all over the place. I realise that the page is extremely long, I'm thinking it could be that but just need to clarify it before I rework it all and maybe find out after, that it was something else that was causing it to happen.
Your views would be greatly appreciated!

Hi Aish,
I have found the problem, but not sure where to find the solution as I'm pretty new to Adobe products.
I built another site to see if I had the same problem, this time I made it shorter to see if the length was the problem. I put in some elements and 'assets', added parallax scroll key frames, left out pretty much most other things to see if I could pin the problem down. I found that I had the exact same problem.
In the Muse preview it scrolls with the mouse like a dream when I grab the scroll bar and drag it down. But when I preview in business catalyst, export HTML or preview in browser, it goes crazy and won't let me get to the bottom. Further to that, when you scroll back to the top, everything is out of place and gets worse every time you scroll down and back to the top.
I have a touch screen computer and tried to scroll the screen with my finger rather than dragging the scroll bar down with the mouse. The website works like a dream when I scroll with my finger, even when I scroll back to the top everything stays in place and the whole site works lovely! I then tried the other, long website to see if this was the same case and it was exactly the same case. It scrolls with a finger like a dream, but has a fit when you drag down the scroll bar with a mouse.
My next question would be could I somehow disable some kind of touch scroll option in only the desktop version of the site, but leave it active in mobile and tablet sites? If I can do this can you please advise me on how to deactivate it, I think that should solve the problem.
Can you please get back to me with an answer to this? I would be very greatful!
Marc.

My magic mouse keeps jumping all over the page

Hi, my magic mouse keeps jumping all over the page and random apps keep appearing on my screen when I'm in facebook and it keeps sliding onto my dashboard screen.

Thanks so much for replying Barry. Did what you said but took me 6 attempts to be able to reply to you so unfortunately did not work. Have to wait over a week to get into Apple store so I guess I've just got to wait. This is my second magic mouse and its driving me crazy. Touch pad also playing up but thanks for the advice and have a good day.
Megs

When in organizer how do I keep my cursor from jumping all over the place?

When I am working in Organizer 12, My cursor jumps all over the place and the screen keeps repositioning itself. It is infurating and I can't get any work done. New desktop iMac using Marevick 10.9.1 and wireless mouse and track pad both slowed to lowest level. Also tried using a tethered mouse but no different. Anyone else have this problem. Is it an Apple problem?

Is it a 'Magic Mouse'? If so that's why, there are many reports that it is badly behaved in the Elements Organizer. If not, do you have another mouse you could try it with (to rule out a hardware problem)?
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Analyzing then rendering...frames jumping all over the place

After sending clip from FCP to Shake, I set interlacing to <even> and then <analyzed>. Upon rendering, I found the frames jumping all over the place. And not a complete image filling in the viewer.
I watched Capt. Menches' tutorial and couldn't get things to gel.
He also mentioned nothing about <deinterlacing> I am using straight QT file, not HD.
I have just two clips I want to smoothcam effect.
Thanks

Thanks.
It was a DV file in FCP then I exported as a Quicktime Self contained movie.
It is now called FCP Movie file with DV/DVCPRO-NTSC
When I open it with Compressor it shows this info as well: NTSC CCIR 601/DV
Also I am under the impression that the de-interlacing should be set to even, Yes?
The clip really isn't so shaky to begin with.
When I play it back in the flipbook. Some frames are on one side of the window then to the other side with some of the frames clipped.
Should I use compressor to make a different codec. I have never used that part of FCP.
Message was edited by: Hanuman Hoffman
Message was edited by: Hanuman Hoffman

How can i stop Pages and Numbers JUMPING ALL OVER THE SCREEN. MAKING ME SEASICK! PLEASE HELP

how can i stop Pages and Numbers screen JUMPING ALL OVER the place when i just touch my mouse. i have tried and tried to change the mouse settings - but it is the software. especially Numbers. you can't even see what the page size is until you print. i am so SEASICK! PLEASE HELP.

Thanks for the trouble to reply. this problem only happens with Pages and Numbers for me. i have done all the tricks like restarting. the main problem is that the working space is not 'stable' - it has no 'ends' even on full screen. in Numbers - UNLESS I SET IT TO 25% VIEW (which is way too small) - the actual total 'work space' is way off the grid - so every time i move the mouse the table i am working on zooms off to left or right, at the slightest touch. i have set my mouse to no gestures!
the thing is this did not happen before the latest upgrades.
but thanks anyway. SG.
if you are a techy person - i have another prob. in Mail i am unable to set the SORT / VIEW messages to BY DATE.
(it used to be ok, at one time, too). now it continually reverts to BY SUBJECT oh so annoying !
restarting etc does not change it. resetting preferences does not change it.
maybe i need a new Mac ?
mine is a 27-inch, Mid 2011. running latest.

Curser is jumping all over the screen by itself

my curser is jumping all over the screen by itself. anyone else have this problem and if so how did you fix it?

I have the same problem.
The curser jumps all over the place either when typing on the keyboard on my totally tricked out 2012 MacAir (i7 2.0GHz, 512GB), or on the bluetooth keygoard that I have on my keyboard tray nearby: does it on both, apparently totally at random and quite often.
It is realy annoying. I am trying to write a large book and this is really slowing me down.
Various solutions are here on the forum related to old batteries bulging the keyboard, but it even does it on the bluetooth keyboard and the thing is only a year old, so that can't be it.
Help!
Thanks,
Daniel

Mouse is Jumping all over the screen...

I have been having all kinds of problems with my mouse. The one on my computer will at times not respond to touch... I thought I had fixed that by wiping it down but it still isnt great...
Then my mouse started having the cursor jumping all over the screen... I ended up going and buying a Magic Mouse as the guy at the store said my mouse was going bad... Well I have been great with the magic mouse for about 24 hours and now it is starting to do it again...
Any ideas of what I should do?

Buy a Logitech Bluetooth mouse!! I have had no problems with my Logitech...it seems like more people have problems with the mighty mouse and magic mouse. That is my opinion. I have this mouse:
http://store.apple.com/us/product/TQ089LL/A?fnode=MTY1NDA1Mg&mco=MTA4MzgwNzg

My mouse keeps jumping all over the place and i dont know why!

My trackpad doesnt allow me to fully control the mouse on the screen! it keeps jumping all over the place and i dont knw why! i updated my computer yesterday and it was working fine but by the end of the night it started to not function properly again.

A fairly well known flaw that occurs to some trackpads. See here: http://support.apple.com/kb/TS1449

My cursor keeps jumping all over the place in Mail since I installed Yosemite

I installed Yosemite yesterday, and now, whenever I try to write an email, my cursor keeps jumping all over the place. I can't write more than a few words without my cursor jumping back in the middle of one of the previous words. I makes Mail almost unusable. Am I the only one with this problem?

Similar problem. Mine seems to happen in mail - my cursor jumps to the line below and carries on typing - almost as if I'd pressed the down arrow to move the cursor. It seems to happen more when I type an apostrophe too.

My cursor is jumping all over the screen

I use the mouse on my computer and when I go to move it it jumps all over the place.

HI..
Try restarting your Mac.
And check your settings in System Preferencds > Mouse
Make sure Mouse keys is disabled in System Preferences > Universal Access > Mouse

I have the "battery guage jumps all over the place" issue, is it 3.0.1?

Similar Messages

Maybe you are looking for