I have the canon MX880 series. Why do it stop printing when not in use for about 30 days?

Hello,
As stated in the subject line, my printer seems to stop printing after sitting for a few weeks. I don't know how I end up getting it to print again, I just keep trying different things and with luck some how it starts to print again, SOMETIMES. However, today I did not get it to print at all. It will not work with WIFI or the USB cord. I have had this printer for about a year and have had this problem every since.
Any help would be greatly appreciated.
Regards
lmd

Hi Tangable34 and Abigail111,
Since each network setup is personal and unique, I recommend contacting us for more catered support. To save a bit of time, be sure to print out a LAN details page and have the information available for your support agent. To print this page, follow these step:
Press the Setup button.
Select Device settings, then press the OK button.
Select LAN settings, then press the OK button.
Select Confirm LAN settings, then press the OK button.
Select Print LAN details, then press the OK button to confirm the selection.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

HT1338 Hi I have an Imac with I5 processor.It was working perfectly and i didnt use for about 2 months.The AC was unpluged.Then week ago when i want to start the Imac, it didnt start.But if i keep holding or pressing the power button for some times then i

Hi I have an Imac I5 21.5 inch.It was working perfectly.Then i didnt use that for about 2 months. Week ago when i want to start the Imac ,it didnt start.
When press and hold or keep on pressing the power button then i hear the fans are working and i get a continuous beep( but low freqency tone).
But screen does not turn on.Please help me to rectify this problem.Best Regards. By the way I am an electronic technician.So if there are any technical things to be done, Pls let me know.I can do it my self.

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

The battery of my iPhone 5 easily discharges even if not in use. This started 11 months after purchase. The unit passed the Apple Battery Health Test Protocol but the performance showed otherwise. What is the problem and how do I solve it?

The battery of my iPhone 5 easily discharges even when not in use. The unit was tested by Apple and passed the Battery Health Test although the performance showed otherwise. The battery deterioration started 11 months after purchase and is not covered by Apple warranty. What is the problem of the iPhone5 and would appreciate suggestions on how to address this problem. By the way, I have a 2 year old iphone 4S with a battery performance as good as when it was bought two years ago.

Hi there Dan Laven,
You may find the information in the article below helpful.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/ht1476
About battery life and the battery
Battery life and number of charge cycles vary by use and settings. Find more information about batteries for iPhone and iPod.
Find information on how long the battery is expected to last between charges.
Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced.
-Griff W.

How to have time capsule sleep when not in use

Is there any way to have my time capsule sleep (stop spinning ) when not in use? it runs constantly and gets warm. I need to find out how to make it idle and wake up when my Mac calls for a backup. Does anyone know if this is possible and if so, how to do it? I have the time capsule connected to a router off of a cable modem. Thanks to all

Is there any way to have my time capsule sleep (stop spinning ) when not in use?
Does the disk spin up and down continually? Or is it just spinning non-stop?
What model is the TC? Please give the A1xxx model from the rubber base mat.. and size of the hard disk.
Did you update to the latest firmware? When did the problem start, ie did it correspond with firmware update?
Have you played with it.. replaced the drive etc? If this is stock standard it should spin down almost immediately disk access finishes.

Is it possible to let the TS-HD go sleep when not in use

is it possible to let the Time Capsule HD go idle when not in use for saving energy?

If the Time Capsule is functioning normally, the hard drive will spin up automatically when a Time Machine backup begins and spin down after the backup is completed.
My Time Capsule normally runs for a minute or two for the backup each hour....otherwise the drive is not active.

I have a Canon MX880. It quit printing with the cyan color for no apparent reason.

I have a Canon MX880 printer. For some reason, it no longer uses the cyan color with printing. I have all colors except those that need cyan. The cartridge is full. Cleaning didn't help.
Solved!
Go to Solution.

Hi br3753,
I know you mentioned already doing cleanings, but I wanted to recommend if you havent already done so to please try 3-4 consecutive cleanings for the best results. If this does not work I would recommend using the Contact Us link to get in touch with out live support staff who can provide warranty options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT203088 I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that?

I have the CANON REBEL T5 1200D, and when i connect it to my mac which is 10.10 the new OS X YOSEMITE it says that it "Cannot be used with this version of the operating system" why does it say that if my camera is listed under the supported digital cameras for OS X YOSEMITE?

Put simply, the minimum system requirements for iTunes have changed. You need a Mac running at least OS X 10.6.8.
It's best you look online to see if your model of Mac can be upgraded to at least 10.6.8 "Snow Leopard". It should still be possible to order a copy of Snow Leopard if so.

Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server.

I'm trying to setup my Canon MX870 USB ink jet printer plugged into my Airport Extreme's USB port. However, I keep getting a message of; "Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server." And then I have to click cancel.
The "Print & Scan" from System Preferences, can see the printer as it has the NAME: Canon MX870 series, and the LOCATION: 'the name of my network', and USE: MX870 series. But after clicking "Add", it tries to install the software (I've already installed the latest drivers however on my Mac Pro) and that's when I get this message;
"Can't install the software for the Canon MX870 series because it is not currently available from the Software Update server."
Any ideas, help would be greatly appreciated!
Marty

Hello Marty,
It sounds like you are not able to add your Canon printer in System Preferences. I found an article with steps you can take to resolve this:
Resolution
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I have a canon mg2100 series printer. I print shipping labels with black ink. I ran out and changed

I have a canon mg2100 series printer. I print shipping labels and use black ink. I ran out and changed the cartridge, now the text is faded looking and I can't read major parts of the label. I did the cleaning print head under control panel and it did fine, but when I try to print again it's still faded. Help!

Hi ttsheppard,
It is recommended that you contact live technical support . There is NO charge for this call. Real time feedback of a live technical support call would be very beneficial in this case.
Please dial 1-866-261-9362, Monday - Friday 10:00 a.m. - 10:00 p.m. ET (excluding holidays). A Canon technical support representative will be able to resolve this issue faster.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

Hi, Tom.
FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
• My my "Multiple applications quit unexpectedly or fail to launch" FAQ
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Why is the sound low on my Ipod? When I have my earbuds in I have to have the volume almost all the way up. I have the volume limit maxed out also. Same thing when I plug it into a boombox

Why does my Ipod play at a low volume? When I have my earbuds in I have to have it at almost full volume, and when I plug it into a boombox it doesn't play as loud as the radio or a cd. I have the volume limit turned all the way up in the settings also. All my songs on my Ipod were burned from cd's(if that helps) thanks.

Sorry, I have the same issue.
So far searching threads here is not coming up with anything.
I have set aside my restore discs, to start the process of ripping the drive clean.
I tried Omni Sweep, but all it did was confirm the space I counted up.
Still does not show what's hidding. 113GB worth on mine.
That software really boggs down the system.
I could not load an email with it running.
Good LUck as well.

I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer. Any help is appreciated.

Russ and Luis,
I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in. Still no luck. I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support This is where it is supposed to be as far as I can figure out.
Another piece of the puzzle is that footage shot on a Canon C300 in 2013 and I reimported today and it DOES import into FCP10.1.3. Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX. The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
Any ideas? (screen shots below)
Thanks.
Peace, Huey
FYI Here is what Canon says
"There is another trick that works sometimes though. Try uninstalling the plugin and XF Utility. Then, install the latest XF Utility, followed by the plugin, in that order."
I did do this but no results. Otherwise they say I need to wait for a new plugin.
Here's 2014 Canon C300 files does NOT import to FCPX
Here's 2013 Canon C300 files does import into FCPX. I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that.

I have Mountain Lion OS but I don't have the Messages app. Why do I still only have iChat?

I have Mountain Lion OS but I don't have the Messages app. Why do I still only have iChat?

HI,
If iChat was put inside a subsidiary folder of the Applications one then it will not get removed.
Apple App need to be loose in the Applications Folder or they will not update properly either.
I have heard of people creating a "Messaging App Folder" and keeping this inside the Applications folder with the consequences listed.
10:15 pm Friday; September 6, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT5569 I have the data plan but why I am unable to use internet in my iphone5?

I have the data plan but why I am unable to use internet in my iphone5? It works fine with Wi-fi though

Why don't you ask your carrier?

When I get the Please wait... message and have the latest Adobe update why won't the document open?

When I get the Please wait... message and have the latest Adobe update why won't the document open?

What is your operating system? Reader version ("latest" means nothing)?
Is this a local or only PDF? If online, in what browser?

I have the canon MX880 series. Why do it stop printing when not in use for about 30 days?

Similar Messages

Maybe you are looking for