I have the DAQ-6229 pinout sheet, but I need it to be defined.

I am using the NI DAQ 6229 card.  I have a copy of the pinout off of the website, but I need to know what everything means.  Like,             PFI 11/P2.3, PFI 13 2.5, P0.5, AI 14, etc.  Any help you can give me will be appreciated greatly.

PFI stands for Programmable Function Interface.  These are general purpose I/O pins which are used for triggering, counter inputs/outputs, and extra digital I/O pins on M Series.
P0.5, for example is Port 0, line 5.  M Series has three ports with either 8 or 32 lines on port 0 and 8 lines on each of port 1 and 2.  The  PFI 11/P2.3 syntax indicates that PFI 11 shares the same pin as port 2, line 3.
AI 0 refers to the positive input of Analog Input Channel 2.  The negative side is either AI 8 (Differential mode), AI GND, or AI SENSE.
As discussed above, all of this is covered in the M Series Help file and the NI-DAQmx Base Help file. Since you are havin issues with the .chm version, you can also download the M Series Help in uncompiled HTML.   http://digital.ni.com/manuals.nsf/websearch/9CD6D8C5C12EB1538625708C00671779

Similar Messages

  • So I had photshop cs5 installed on my pc...i had to get my hard drive replaced! I have the serial number and everything, but I need to know how to download it. I really don't wanna have to pay for the program over again.

    So I had photshop cs5 installed on my pc...i had to get my hard drive replaced! I have the serial number and everything, but I need to know how to download it. I really don't wanna have to pay for the program over again.

    If you registered your product, you should be able to find the download and serial number from your Adobe account.
    https://www.adobe.com/account.html
    Otherwise:
    Download Adobe CS5.5 Trials: Direct Links (no Assistant or Manager) | ProDesignTools
    You might still have to contact Customer Support to reset your Activations, unless you managed to deactivate the original installation.

  • HT5100 i have the latest vergin of itunes but i need instead the 8.2.1itunes for my 3g iphone

    i have itunes and while iam downloading appls to my iphone stopped and can't use it and can't turne it on

    The latest version of iTunes should have no problems synchronizing to an iPhone 3G. If you'll post details - your computer OS, version of iTunes, and what exactly is going wrong including error messages if any - perhaps someone here can help you sort things out.
    If you happen to have a Windows-based computer, this may help:
    http://support.apple.com/kb/TS1538
    Regards.

  • I do not have the daq assistant vi on my labview 2010 and have found no drivers for it what should i do

    I do not have the daq assistant vi on my labview 2010 and have found no drivers for it. I downloaded the service pack but  that did not have it either what should i do.

    Hi Youzhang He, 
    Did you install LabVIEW first on your PXIe 8102 before the drivers?  Most likely, you're missing LabVIEW support for your DAQmx drivers. Fortunately, this is an easy fix. What you should do is open Add/Remove Programs, select National Instruments Software, select Uninstall/Repair. In the window that pops up listing NI software, select NI-DAQmx 9.x and select Modify. In the window that appears, expand Application Development Support and select to install LabVIEW support.  From here complete the install process and restart your system.  LabVIEW support should be installed and DAQ Assistant should appear in your palette.
    Allie

  • I have the latest photoshop cc 2014, but i dont see perspective warp in it, does anyone have an idea why

    I have the latest photoshop cc 2014, but i dont see perspective warp in it, does anyone have an idea why

    As you can see, its in Dutch, please comment

  • Itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!

    itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!

    I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
    It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
    By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly.

  • I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup.

    I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup the iPod. I have authorized my computer.  Still no luck.

    Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
    Also
    - Reboot the computer
    - Try another cable
    - Try another USB port

  • My system preferences have suddenly disappeared! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??

    I went to my system preferences today and they are all gone except for my language and text icon! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??

    Double click on the picture of the HD on your desktop, then look at the bottom of the window that opens.
    First check the S.M.A.R.T. status on your HD: Applications > Utilities > Disk Utility > in the panel at left, select the first item in the list/your HD mechanism > look atthe bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
    If S.M.A.R.T.status is "Verified," run Repair Disk: Boot from install disc (insert disc > restart > immediately hold down c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > open Disk Utility > select your HD in the panel on the left side > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.

  • I have the latest version of Itunes but it freezes my whole computer when it starts up

    I have the latest version of Itunes but it freezes my whole computer when it starts up.  I have installed/reintalled Itunes but it still stops my whole computer when I start Itunes.

    OK, so we rule out LSP then,
    Try following steps one at a time and test your itunes:
    1. Restart computer, right mouse click iTunes icon and select "Run As Administrator", now try your itunes.
    2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
    Close your iTunes.
    Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
    Now open itunes and see if it is working?
    If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
    MSCONFIG
    Hit ENTER
    Click STARTUP Tab, Uncheck "Apple Push", click OK.
    Restart Windows.
    3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
    http://support.apple.com/kb/TS2363
    4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

  • I have the right update of itunes but my iphone wont connect to itunes? What do i do?

    I have the right update of itunes but my iphone wont connect to itunes? What do i do?

    Hi jskills,
    If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may want to take a look at the troubleshooting steps in the following article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Brenden

  • I have the Native AMP stack installed but apache not working

    i have the Native AMP stack installed but apache not working is there a way to reset apache manafaacture settings

    The following line tells me that this is not a template file, but a document created from a template called index.dwt
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
    This means that you saved a child document as a template file at some stage.
    If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

  • When I go into bookmarks and click on a, the screen shows what appears to be a compass with a lock overlay, on a black background. At the bottom the address/url are shown. Theses cannot be opened. Other bookmarks have the black background and compass, but

    When I go into bookmarks and click on a site, the screen shows what appears to be a compass with a lock overlay, on a black background. At the bottom the address/url are shown. Theses cannot be opened. Other bookmarks have the black background and compass, but no lock. These can be opened by clicking on the compass. What is wrong?

    Thanks to the-edmeister and cor-el, for speed of response. I had not inadvertently moved the Bookmarks-Toolbar : I was confronted with the situation right after Firefox 9 had installed and unfolded in front of me. At first, the toolbar area looked reassuringly familiar, but when I started normal work, I discovered the lack of tabs and the only reference I could see to TABS was a tiny button inviting me to group tabs (which was unhelpful to say the least, filling up the screen with tiny unreadable windows). Sure, there were tabs forming, but they were invisible, unless I used the group button. Eventually, I was brave enough to use "reset toolbars" and the tabs came back in the way I want them, but it was a traumatic 2-3 hours out of my life. I kept on "adding a new toolbar" to see if I could make use of it; I kept giving them names, but it is impossible to see where the new tool bar is! (the toolbars don't have a little bit to grab at one end). In my opinion, Firefox should not have allowed the Tab Bar and the Bookmarks Toolbar to become caught up with each other - they have completely different functions. I don't think I would like to play around with "Make a new profile"! I was so desperate that I have already downloaded version 3.6 again, ready to install, for if I was unable to resolve the version 9 problems above.

  • I dropped my iPod touch 4 generation on my kitchen tile and it shattered, like chunks of the screen are coming off. But everything works and I've had it for a 1 ½ years now. I don't have the extended warranty or anything but can I get it replaced somehow

    I dropped my iPod touch 4 generation on my kitchen tile and it shattered, like chunks of the screen are coming off. But everything works and I’ve had it for a 1 ½ years now. I don’t have the extended warranty or anything but can I get it replaced somehow? if anyone knows anything please let me know. thank you!

    Depending on the extent of the damage, Apple may replace the iPod for a flat fee; see the Repair Pricing section here:
    http://www.apple.com/support/ipod/service/faq/
    There are independent iPod repair services that may be able to repair the iPod for less. Do a web search for "ipod repair". Note, though, that if you elect to have the iPod serviced by an unauthorized shop, all further warranty will be void.
    Regards.

  • HT1296 I have the tones tab in itunes, but cannot transfer files to it?  is there a glitch in the software or am I just doing something wrong??

    I have the tones tab in iTunes, but cannot move the .m4r files to it. How can I resolve this issue?

    iIn iTunes - click on the Tones tab.  Now go to the menu - select "File" - "add file to library" - browse to your file - select it and thats it.

  • Does any one know of software that you can import a PDF and then draw  on it, dimensions, notes and symbols...technical drawing?. Blue beam have the perfect software for this BUT it's not Mac compatible

    Does any one know of software that you can import a PDF and then draw  on it, dimensions, notes and symbols...technical drawing?. Blue beam have the perfect software for this BUT it's not Mac compatible

    You need a PDF editor, at the high end use Adobe's Acrobat Professional, at the low end use the editing features in Preview (pre-loaded on your iMac). However you should probably look at the Mac App Store, you will find many of PDF editing applications. You simply need to find one that suits your needs.

Maybe you are looking for