I have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?

i have the djay app on my ipad and i want to record the set i'm playing on my iphone through garageband. i need to take the sound from the headphone jack of the ipad, as the 30pin connector will be used to connect to the DJLive accessory. Is this possibl?reco

You may get a better response in this community:
https://discussions.apple.com/community/app_store/garageband_for_ios

Similar Messages

  • TX2000 no sound from front headphone jacks

    Hi everyone, Ive started this because I have a major problem with my pavilion tx2000. it is not outputting any sound from the front headphone jacks, it was working okay on windows 7 64 bit but one good day without any aparent reason it stopped working I mean, I used to plug my headphones and immediatly the laptop speakers shout and I coud hear music from any of the two front headphone jacks but one day I did it and the speaker didnt shout and I couldnt hear anything from the headphones, assuming that the headphones were the problem I plugged another headphones that I knew were working fine with the same result.
    I was using windows 7 default drivers then I updated the drivers from the official realtek site (I thnk version R267) with no effect, then I installed linux and plugged the headphones, to my surprise audio were outputting from both, the laptop speakers and the headphones, after some configurations I managed linux to output audio only from the headphones but I have to change it manually if I wanted the laptop speakers to work, I then reinstalled windows 7 64 with the updated driivers from realtek, to my surprise realtek audio manager will pop up a message saying "you just plugged and audio device" BUT ONLY IF I PLUG SOMETHING TO THE MICROPHONE JACK!!!!! otherwise it won´t say anything even if I plug my headphones to any of the both headphone jacks, my assumption is that somehow the headphone jacks lost its sensibility and are not detectng the headphones and as so they wont route the audio signal through them, also Ive read on forums that I could change something in the realtek audio manager as "disable front audio jacks" or something but i can´t see that option anywhere in any of the various versions of drivers I´ve tried on the various OSes Ive tried, Also in some point I did notice a red ligth coming out from the first headphone jack, I assumed it was spidf signal or something.
    What im thiking is that this is hardware related, that somehow the jacks lost sensibility and cant detect my headphones, the question here is this: I dont mind routing the audio from the laptop speaker to the headphone jacks manually (I mean with some script or something), but is there any way to do so In windows, In linux I could but in windows I just cant seem too get it to work without windows detecting my headphones automatically, or do I have to change the whole front panel in my laptop, it is offcourse out of warranty and I don´t want to keep spending money on this as this is quite an old machine wich Ive invested way too much.
    THANK YOU ALL IN ADVANCE.
    HP Pavilion TX2000 (tx2032la)
    Windows 7 Ultimate 64-bit
    NO sound from front headphone jacks.
    No hardware changes made.

    Oh and one more thing:
    In the Audio tab in Sounds and Audio Devices in Control Panel, it has this option of
    "Use only default devices"
    Is it OK to check that?
    Does that mean that if I choose Audigy 2 for the sound playback and etc. options, it would "lock" the default as Audigy 2?
    Because as I said, I don;t want to go back and forth switching from onboard to Audigy over and over.
    I just want Audigy as my sound, and be able to use the headphone jack on the front bevel of my computer.

  • No sound from MacBook headphone jack until the cable is plugged in and -out

    Hey there! If I connect speakers (iPod Hi-Fi) to my shut down MacBook and then start the MacBook, there's no sound neither form the MacBook nor from the speakers.
    If I plug out the cable the sound comes from the MacBook as usual, if I plug it in again the Hi-Fi works regularly. How come?

    Hi,
    The HDMI sound may disable the other sound therefore you need to disable HDMI sound (remember put back if you wish to use it). Please check this video:
       http://www.youtube.com/watch?v=LlYXiTK05nM
    For example, in my machine I can just disable HDMI sound from this area:
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • No sound from front headphone jack after SoundBlaster installat

    Hi everyone, I recently bought a Sound Blaster Audigy 2 Value PCI Sound Card.
    I installed it as normal as any other PCI card. I disabled onboard sound in BIOS. I installed all the Creative software and drivers, and the sound is working...but only from the sound card at the back of the PC.
    I have on my Dell 4550,at the front of the PC tower: 2 USB ports (which still work), and a headphone jack, which doesn't work.
    The headphone jack at the front used to work before I instlaled the Audigy 2 card, but now, after the installation, it doens't work.
    Does anyone have a solution to this or an explanation as to why it is behaving like this?
    Any info is greatly appreciated.
    Thanks!
    Michael

    Oh and one more thing:
    In the Audio tab in Sounds and Audio Devices in Control Panel, it has this option of
    "Use only default devices"
    Is it OK to check that?
    Does that mean that if I choose Audigy 2 for the sound playback and etc. options, it would "lock" the default as Audigy 2?
    Because as I said, I don;t want to go back and forth switching from onboard to Audigy over and over.
    I just want Audigy as my sound, and be able to use the headphone jack on the front bevel of my computer.

  • I already use the single app plan for indesign and am wanting to add photoshop too. Do I qualify for the special offer complete package plan for existing cs customers or not?

    Hi there,
    I am just wondering what is the best way for me to do this - If i can qualify for the reduced rate complete package then this may be better value but I'm not sure if I do!

    Hi Charlie,
    You can go for the Photography plan which includes both Photoshop and Lightroom as a bundle and it will cost you $9.99 a month.
    Creative Cloud Photography plan | Adobe Creative Cloud
    Thanks,
    Nikhil Gupta

  • I already have a Windows 8 Professional 32 bit and I want to upgrade it to 64 bit with Software Assurance what software do i need?

    Is this version complies with my requirement?
    WinEntforSA SNGL UpgrdSAPk OLP NL Acdmc 
    Part Number: CW2-00204

    Hi!
    In this case you need to reinstall the Operating System on your client, if you have bought a retail DVD with Windows 8, it should contain the files for both x86 and x64.
    If the OS came pre-installed on the client, you need to acquire a new license for x64.
    The one you have mentioned is intended for companies that are already running Windows 7, for example, and want to upgrade to Windows 8.
    Best regards
    Andreas Molin
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

  • I just bought a new iPad and I want to bring over all my apps from my first iPad but I don't have a computer, do I just use the cloud?

    I just bought a new iPad and I want to bring over all my apps from my first iPad but I don't have a computer, do I just set up an icloud account and upload all the things from my first iPad and then connect the new iPad to the icloud using the same account and sync it?

    No. You configure your new one to use the same Apple ID. Then re-download from iTunes:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • If i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    if i have one iPad and I want all the apps that are there how do I copy that so i can have them on another iPad the same way as i have them on the first iPad?

    If you want both iPad to be identical .....
    Without connecting your iPad to your laptop, start iTunes. Go to iTunes>Preferences>Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    Now connect your iPad to your Mac and start iTunes.
    When iTunes starts, right click on your iPad under Devices in the left column. Select Transfer purchases.
    After it finishes transferring all your apps to the Mac, right click on your iPad and select Backup your iPad.
    Sync the iPad and eject it when it is complete.
    Quit iTunes
    Connect the second iPad.
    Launch iTunes
    Right click on the iPad name on the left side and select - Restore from Backup
    Select the backup of the first iPad and let it restore from that backup.
    When it finishes restoring - sync with iTunes to transfer all of the apps and any other content that you want onto that iPad
    Eject the iPad when you are done.
    Check the second iPad and if all of the content did not sync as you wanted - or you want to remove some of the content - connect it again and then choose the content that you want - uncheck what you do not want - and click on Apply in the lower right corner of iTunes.

  • I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?

    I have some apps on my ipad and I want to install more ,but it doesn't show the apps on the home and when I try to open them from the AppStore it doesn't work , what should I do?

    Are you not seeing the icon of the app you just downloaded (it happens sometimes, and the quick fix is to reset your iPad)? Or are you running out of space on your iPad?

  • HT4314 Hi I have clash of clans only Game Center on my iPhone and on my iPad and I want to get rid of the one on my iPad, on my iPhone it always comes up with 'would you like to use you town hall level 4' help!

    Hi I have clash of clans only Game Center on my iPhone and on my iPad and I want to get rid of the one on my iPad, on my iPhone it always comes up with 'would you like to use you town hall level 4' help!

    Please help me back my clash of clans game. I cant access my games. But im steel can visit. Please hepl me.

  • I bought The Djay app, for iPad, but I can't download it on the Mac App Store, whitout having to pay the 20$ why is that?

    I bought The Djay app, for iPad, but I can't download it on the Mac App Store, whitout having to pay the 20$ why is that

    Because the developer needs to create and maintain the two versions separately and has chosen to charge for the Mac OS X version.
    (94269)

  • I have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see picture from one of the albums.what should i do?

    i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?

    You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
    Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums.

  • I downloaded the Keynote app to use on my iPad and because of iCloud, it is trying unsuccessfully to download onto my iPhone. How can I get it to stop attempting to download onto my iPhone? It says waiting and I can't delete it (no X to click). Thx!

    I downloaded the Keynote app to use on my iPad and because of iCloud, it is trying unsuccessfully to download onto my iPhone. How can I get it to stop attempting to download onto my iPhone? It says waiting and I can't delete it (no X to click). Thx!

    Did you try shutting down the device? Resetting? Disabling iCloud? Disabling auto-update?
    I'd find the problem that is keeping the download from proceeding and fix that so that the process can finish...sounds like it may be your connection or a server issue, in which case you may need to wait.

  • I have just got an iPad and I want the music to be transferred through my iPod touch using iCloud but I didn't get the music from iTunes so I don't think it will let me do it. Do you have any tips that could help me?

    I have just got an iPad and I want the music to be transferred through my iPod touch using iCloud but I didn't get the music from iTunes so I don't think it will let me do it. Do you have any tips that could help me?

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • HT4623 hi! i have an ipad2 64gb ios 4.3 and i want to upgrade it. the settings portion of my ipad doesn't have the "software update" option..is there any other way of updating it?

    hi! i have an ipad2 64gb ios 4.3 and i want to upgrade it. the settings portion of my ipad doesn't have the "software update" option..is there any other way of updating it?

    You need to connect to iTune (computer) to update software
    http://support.apple.com/kb/HT4972

Maybe you are looking for