I have the following errors executing ./emctl secure status agent

[oracle@SVDBGRICONTROL bin]$ ./emctl secure status agent
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /u01/app/oracle/product/10.2.0/agent10g/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3872.
Checking the security status of the OMS at http://SVDBGRICONTROL:4889/em/upload/... Done.
OMS is running but has not been secured. No HTTPS Port available.

this is my emoms.trc please any solution.......
2006-08-21 02:17:31 Thread-3086993088 INFO TargetManager: save to targets.xml success
2006-08-21 02:17:31 Thread-3076520880 WARN http: snmehl_connect: connect failed to (10.3.6.222:1159): Connection refused (error = 111)
2006-08-21 02:17:31 Thread-3076520880 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://10.3.6.222:1159/em/upload: retStatus=-32
2006-08-21 02:17:31 Thread-3076520880 WARN http: snmehl_connect: connect failed to (10.3.6.222:1159): Connection refused (error = 111)
2006-08-21 02:17:31 Thread-3076520880 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://10.3.6.222:1159/em/upload: retStatus=-32
2006-08-21 02:17:31 Thread-125782960 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds or earlier.
2006-08-21 02:17:31 Thread-125782960 ERROR upload: Exceeded max. amount of upload data: 2650 files, 128.086041 MB Data. 18.53% of disk used. Disabling collections.
2006-08-21 02:17:31 Thread-125782960 WARN collector: Disable collector
2006-08-21 02:17:31 Thread-125782960 ERROR collector: Collector state files cleaned, severity will be resent
2006-08-21 02:17:36 Thread-125782960 ERROR upload: Error in uploadXMLFiles. Trying again in 72.00 seconds or earlier.
2006-08-21 02:17:37 Thread-69258160 WARN http: snmehl_connect: connect failed to (10.3.6.222:1159): Connection refused (error = 111)
2006-08-21 02:17:37 Thread-69258160 ERROR command: nmejcn: failed http connection to https://10.3.6.222:1159/em/upload: retStatus=-32
2006-08-21 02:17:53 Thread-69258160 WARN http: snmehl_connect: connect failed to (10.3.6.222:1159): Connection refused (error = 111)
2006-08-21 02:17:53 Thread-69258160 ERROR command: nmejcn: failed http connection to https://10.3.6.222:1159/em/upload: retStatus=-32
2006-08-21 02:18:01 Thread-125782960 WARN http: snmehl_connect: connect failed to (10.3.6.222:1159): Connection refused (error = 111)
2006-08-21 02:18:01 Thread-125782960 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://10.3.6.222:1159/em/upload: retStatus=-32
2006-08-21 02:18:01 Thread-125782960 WARN http: snmehl_connect: connect failed to (10.3.6.222:1159): Connection refused (error = 111)
2006-08-21 02:18:01 Thread-125782960 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://10.3.6.222:1159/em/upload: retStatus=-32
2006-08-21 02:18:09 Thread-36989872 WARN http: -1,7: nmehl_httpListener: signaled to exit from emctl

Similar Messages

When I use the export function of quicktime nothing append and I have the following error message on the console : QuickTime Player[1723]postExceptionEvent caught non-fatal NSInvalidArgumentException

When I use the export function of quicklime (export to iPad,iPhone, Apple TV ... format), nothing append and I have the following error message on the monitor windows, (I'm using quicktime Version 10.4 (833) with OS X Yosemite ):
06/11/2014 22:22:03,507
QuickTime Player[1723]
postExceptionEvent caught non-fatal NSInvalidArgumentException '*** -[NSDictionary initWithObjects:forKeys:]: count of objects (0) differs from count of keys (4)' with backtrace (
0   CoreFoundation                      0x00007fff8ac6564c __exceptionPreprocess + 172
1   libobjc.A.dylib                     0x00007fff8924f6de objc_exception_throw + 43
2   CoreFoundation                      0x00007fff8ab98dcd -[NSDictionary initWithObjects:forKeys:] + 941
3   Foundation                          0x00007fff8a6a8bcc -[NSDictionary(NSDictionary) initWithCoder:] + 245
4   Foundation                          0x00007fff8a686150 _decodeObjectBinary + 2872
5   Foundation                          0x00007fff8a6854a6 _decodeObject + 278
6   Foundation                          0x00007fff8a6a9921 -[NSKeyedUnarchiver decodeObjectOfClasses:forKey:] + 173
7   Foundation                          0x00007fff8a75f2b4 -[NSError initWithCoder:] + 253
8   Foundation                          0x00007fff8a686150 _decodeObjectBinary + 2872
9   Foundation                          0x00007fff8a6854a6 _decodeObject + 278
10 Foundation                          0x00007fff8a6ab0c9 +[NSKeyedUnarchiver unarchiveObjectWithData:] + 89
11 QuickTime Player                    0x000000010dcd8253 QuickTime Player + 758355
12 QuickTime Player                    0x000000010dc8981f QuickTime Player + 436255
13 QuickTime Player                    0x000000010dc894fb QuickTime Player + 435451
14 QuickTime Player                    0x000000010dc6ce48 QuickTime Player + 319048
15 AppKit                              0x00007fff93c5d75a __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke1714 + 113
16 AppKit                              0x00007fff93c4efca -[NSDocument continueActivityUsingBlock:] + 323
17 AppKit                              0x00007fff93c5d5cb __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_21706 + 458
18 AppKit                              0x00007fff93c5d0ec __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke1690 + 1365
19 AppKit                              0x00007fff940903b6 -[NSVBSavePanel didEndPanelWithReturnCode:] + 68
20 AppKit                              0x00007fff9409323d -[NSVBSavePanel didEndSheet:returnCode:contextInfo:] + 154
21 AppKit                              0x00007fff93f718d9 -[NSWindow _endWindowBlockingModalSession:returnCode:] + 315
22 AppKit                              0x00007fff9409307c -[NSVBSavePanel observeValueForKeyPath:ofObject:change:context:] + 560
23 Foundation                          0x00007fff8a677c73 NSKeyValueNotifyObserver + 382
24 Foundation                          0x00007fff8a676e48 NSKeyValueDidChange + 463
25 Foundation                          0x00007fff8a67b9ad -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 118
26 ViewBridge                          0x00007fff959cbbd7 -[NSViewBridge nonLocalChangeInProgress:block:] + 382
27 ViewBridge                          0x00007fff95a15766 -[NSRemoteViewMarshal exceptionSafeSetRemoteObject:forKey:withReply:] + 275
28 ViewBridge                          0x00007fff95a158f1 -[NSRemoteViewMarshal setRemoteObject:forKey:withReply:] + 56
29 CoreFoundation                      0x00007fff8ab3e33c __invoking___ + 140
30 CoreFoundation                      0x00007fff8ab3e192 -[NSInvocation invoke] + 290
31 ViewBridge                          0x00007fff95a1bce3 __deferNSXPCInvocationOntoMainThread_block_invoke + 85
32 ViewBridge                          0x00007fff95a1b91e __deferBlockOntoMainThread_block_invoke_2 + 390
33 CoreFoundation                      0x00007fff8ab8354c __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__ + 12
34 CoreFoundation                      0x00007fff8ab75655 __CFRunLoopDoBlocks + 341
35 CoreFoundation                      0x00007fff8ab75196 __CFRunLoopRun + 1814
36 CoreFoundation                      0x00007fff8ab74838 CFRunLoopRunSpecific + 296
37 HIToolbox                           0x00007fff8cb6f43f RunCurrentEventLoopInMode + 235
38 HIToolbox                           0x00007fff8cb6f1ba ReceiveNextEventCommon + 431
39 HIToolbox                           0x00007fff8cb6effb _BlockUntilNextEventMatchingListInModeWithFilter + 71
40 AppKit                              0x00007fff9383b821 _DPSNextEvent + 964
41 AppKit                              0x00007fff9383afd0 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 194
42 AppKit                              0x00007fff9382ef73 -[NSApplication run] + 594
43 AppKit                              0x00007fff9381a424 NSApplicationMain + 1832
44 libdyld.dylib                       0x00007fff8ec845c9 start + 1
timestamp: 22:22:03.507 Thursday 06 November 2014
process/thread/queue: QuickTime Player (1723) / 0x7fff78cd0300 / com.apple.main-thread
code: line 844 of /SourceCache/ViewBridge/ViewBridge-99/ViewBridgeUtilities.m in logCaughtException
#exceptions
06/11/2014 22:22:03,525
com.apple.appkit.xpc.openAndSavePanelService[1748]
remote view failed to set bridge object {
    URL = "file:///Users/pascalgros/Documents/Videos%20Maurice%202013/Exports/M2U01020.m4 v";
    URLs =     (
        "file:///Users/pascalgros/Documents/Videos%20Maurice%202013/Exports/M2U01020.m4 v"
    index = 1;
    result = 1;
} for key most-recent-completion due to Error Domain=com.apple.ViewBridge Code=8 "L’opération n’a pas pu s’achever. (com.apple.ViewBridge erreur 8)." UserInfo=0x61000006ebc0 {com.apple.ViewBridge.error.hint=most-recent-completion, com.apple.ViewBridge.error.description=NSViewBridgeExceptionError}; service call stack was (
0   ViewBridge                          0x00007fff959e8b30 -[NSViewServiceMarshal setRemoteObject:forKey:] + 341
1   Foundation                          0x00007fff8a677c73 NSKeyValueNotifyObserver + 382
2   Foundation                          0x00007fff8a676e48 NSKeyValueDidChange + 463
3   Foundation                          0x00007fff8a67b9ad -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 118
4   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a661407 com.apple.appkit.xpc.openAndSavePanelService + 9223
5   AppKit                              0x00007fff93dead5a -[NSSavePanel _dismissModeless:] + 109
6   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a66191c com.apple.appkit.xpc.openAndSavePanelService + 10524
7   AppKit                              0x00007fff93ded580 -[NSSavePanel ok:] + 449
8   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a661952 com.apple.appkit.xpc.openAndSavePanelService + 10578
9   libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
10 AppKit                              0x00007fff93a0a5e7 -[NSApplication sendAction:to:from:] + 410
11 AppKit                              0x00007fff93a0a410 -[NSControl sendAction:to:] + 86
12 AppKit                              0x00007fff93bdedaf __26-[NSCell _sendActionFrom:]_block_invoke + 131
13 libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
14 AppKit                              0x00007fff93a52f2c -[NSCell _sendActionFrom:] + 144
15 AppKit                              0x00007fff93bc5ab2 -[NSButtonCell _sendActionFrom:] + 39
16 libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
17 AppKit                              0x00007fff93a6da66 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 2731
18 AppKit                              0x00007fff93a6ccc1 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 491
19 AppKit                              0x00007fff93a6c289 -[NSControl mouseDown:] + 714
20 AppKit                              0x00007fff93f65fef -[NSWindow _reallySendEvent:] + 12827
21 AppKit                              0x00007fff939f065c -[NSWindow sendEvent:] + 368
22 AppKit                              0x00007fff939a21e6 -[NSApplication sendEvent:] + 2238
23 ViewBridge                          0x00007fff959d18ab -[NSViewServiceApplication sendEventWithoutCatch:withForwarding:] + 652
24 ViewBridge                          0x00007fff959d1fbd -[NSViewServiceApplication sendEvent:withForwarding:] + 29
25 AppKit                              0x00007fff9382efe8 -[NSApplication run] + 711
26 AppKit                              0x00007fff9381a424 NSApplicationMain + 1832
27 libxpc.dylib                        0x00007fff88837ef2 _xpc_objc_main + 793
28 libxpc.dylib                        0x00007fff88839a9d _parse_sysctl_once + 0
29 ViewBridge                          0x00007fff95a20165 xpc_connection_handler + 0
30 ViewBridge                          0x00007fff959d4ff7 NSViewServiceApplicationMain + 1892
31 com.apple.appkit.xpc.openAndSavePanelService 0x000000010a665035 main + 208
32 libdyld.dylib                       0x00007fff8ec845c9 start + 1
33 ???                                 0x0000000000000001 0x0 + 1
timestamp: 22:22:03.525 Thursday 06 November 2014
process/thread/queue: com.apple.appkit.xpc.openAndSavePanelService (1748) / 0x7fff78cd0300 / com.apple.main-thread
code: line 3847 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in __47-[NSViewServiceMarshal setRemoteObject:forKey:]_block_invoke_2
#communications_failure

Hi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens

HT1212 hi I have the following error message : iTunes could not collect to the iPodan error orccurered (0xE8000084) I

hi I have the following error message : iTunes could not collect to the iPodan error orccurered (0xE8000084) I

iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

I have the following error The file "iTunes library.itl" cannot be read because it was created by a newer version of iTunes

Can anyone help me with this problem. I tried updating the latest itunes and it caused an error MSVCR80.dll missing. I then tried fixing it after reading other people had the same problem and a solution was given about uninstaling itunes and the order in which to do that. I did that but now get the error "the files "itunes library.itl" cannot be read because it was created with a newer version of itunes. I see a solution has been given about this but I cannot find what is suggested to enable me to follow instructions. Can anyone please go through step by step (letting me know where I can find what is needed) to enable me to be able tio log into itues again. Thanks

Hi pussygalore,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
You may want to make sure that in the last step (reinstalling iTunes) that you are installing the latest/newest available version, and not attempting a reinstall from an older file.
Regards,
- Brenden

I have the following error message: Time Machine could not complete the backup. The backup disk image "/Volumes/Data-1/test's MacBook.sparsebundle" is already in use

time machine has been running smoothly for years- until now. i changed the name of the computer, and now i get the error message. any ideas? d

I have had more than 1 customer with this error recently. I believe the fix is to unplug the TIme Capsule (I was told you should leave it unplugged about 20 minutes, but can't tell you why that amount of time) then plug the Time Capsule back in and your problem should be solved.
Steve

I have the following error message: Firefox doesn't know how to open this address, because the protocol (itpc) isn't associated with any program. Now what?

Trying to download a podcast. Have downloaded itunes. When I click to get the podcast I get the aforementioned message. It doesn't help.

Make sure that you have iTunes installed properly and that the program has registered the itpc: protocol.
See http://kb.mozillazine.org/Register_protocol

I have the following error.

Acrodist.exe
The instruction at 0x0045c9e5 referenced memory at 0x01e4ec2c. the memory could not be read

Reinstall the Lexmark printing software.

OEM12c :: Agent has stopped monitoring. The following errors are reported : DISK_FULL

Hello sir,
I am new to EM12c Cloud Control.
Problem is that EM shows "Agent Unreachable" as status for an agent.
and also shows following error ::Agent has stopped monitoring. The following errors are reported : DISK_FULL.
Agent status is as follows:
E:\Agent_Grid\agent_inst\bin>emctl status agent
Oracle Enterprise Manager Cloud Control 12c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Agent Version     : 12.1.0.3.0
OMS Version       : 12.1.0.3.0
Protocol Version : 12.1.0.1.0
Agent Home        : E:/Agent_Grid/agent_inst
Agent Binaries    : e:/Agent_Grid\core\12.1.0.3.0
Agent Process ID : 7164
Parent Process ID : 5816
Agent URL         :
Repository URL    :
Started at        : 2013-11-20 11:58:25
Started by user   :
Last Reload       : (none)
Last successful upload                       : 2013-11-20 12:02:58
Last attempted upload                        : 2013-11-20 12:02:58
Total Megabytes of XML files uploaded so far : 0.06
Number of XML files pending upload           : 0
Size of XML files pending upload(MB)         : 0
Available disk space on upload filesystem    : 1.15%
Collection Status                            : [COLLECTIONS_HALTED(
UPLOAD SYSTEM Threshold (UploadMaxDiskUsedPct: 98) exceeded with 98.84559)]
Heartbeat Status                             : Ok
Last attempted heartbeat to OMS              : 2013-11-20 12:19:04
Last successful heartbeat to OMS             : 2013-11-20 12:19:04
Next scheduled heartbeat to OMS              : 2013-11-20 12:20:04
Agent is Running and Ready
I also found some help at
Agent has stopped monitoring. The following errors are reported : COLL_DISABLED|DISK_FULL | Sunkupuli DBA
but didn't help me.
Please, help How can Agent start Monitoring again?
Many Thanks in advance

Free disk space or Add disk space - such that the Disk usage is less than 95%
The Agent Collections will be re-enabled (when Disk usage falls below 95%)
Wait for a few minutes; the Agent and Host Targets should now be shown Up in Console.
Symptoms are almost similar to MOS note 1501904.1

Is anyone has already had the following error using PDF Generator?

Hello,
I try to convert some documents (.doc, .ppt, ...) into .pdf using the PDF Generator.
And sometimes, I hava the following error in a .log file (in the out directory):
Failed to process job DDLaunchObject-2006-08-08 13-22-40.102.doc
Error Code: 1,011
Reason: The BMC reported failure in converting the document.
Is anyone has already had that error? What do I have to do?
Please, could you help me?
Thanks a lot!

I have seen this error when trying to convert a certain Word document. The Word document itself when i opened it in Word resulted in a warning message that it needed to install a language pack, once i installed this language pack, the conversion in PDFG worked.
PDFG uses the native process in the background to convert the files. That means for Word docs it actually uses msword.exe to read the document. If opening the document in Word results in any kind of error or user dialog, then this could be what causes the PDFG server to fail, as the server cannot respond to the error/dialog that occurs.
hope that helps.
David.

When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor. How do I fix these?

When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?

Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

I recieve the following error when running an executable ("This VI is not Executable. The full development version of Labview is required to fix the errors"

I recieve the following error when trying to build and run a labview executable. I am able to build the executable but when trying to run the executable, a pop up window comes up asking the user to select a dll. (please see screen shot attached). Once the DLL is selected, I get the error that This VI is not Executable. The full development version of Labview is required to fix the errors. (please see screen shot attached). I have also attached a snapshot of the project window.
I have the professional development system
I can run the main VI
all the required DLL's are in the dependencies section of the project window.
I am trying to find the root cause of this error but to no avail. can anyone give me a clue to what i am missing here. Any suggestions on where i should look to find the problem ?
Thanks in advance to all labview users for your help
Attachments:
project window.PNG ‏36 KB

other PNG
Attachments:
Broken Arrow on EXE.PNG ‏179 KB

I have OSX 10.7 Lion I set up a separate email account for my wife. Now when she tries to enter a website we get the following error message: Java Script: Not Null validator already loaded. The website never opens and it is difficult to get out of:

I have OSX 10.7 Lion. I set up a separate email account for my wife. All of a sudden when she tries to enter and website from email we get the following error message. JavaScript; The notnull validator has already been loaded. From there we can't seem to go any where. When you hit OK it just keeps appearing and the only way to get out of it is to quit Safai. If you try and got directly to Safari you get the same error message and can't go any further. Please help.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

When i drag and drop an image on my site. it gives the following error. "Unable to access local files due to browser security settings. To overcome this, follo"

I am using the firefox version 17 and when i drag and drop an image on my website. It gives me the following error.
Unable to access local files due to browser security settings. To overcome this, follow these steps: (1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again. Or go to the homepage for a link to the tutorial on how to do it.
I have completed the above steps and it is still showing the same error message. Any help would be highly appreciated.
Thanks.

Thanks kumars ,
I have a specific drag and drop area on our website. This works fine for all earlier releases of Firefox after these security settings
"(1) Enter "about:config" in the URL field; (2) Right click and select New->Boolean; (3) Enter "signed.applets.codebase_principal_support" (without the quotes) as a new preference name; (4) Click OK and try loading the file again."
Bust these settings not work for me in Firefox 17.
Yes the drag and drop functionality is java script based and i am not using any script blocker addons.

Jaas sample progrma in weblogic 6.1 giving the following error java.lang.SecurityException: attempting to add an object which is not an instance of java.security.Principal to a Subjec

jaas sample progrma in weblogic 6.1 giving the following error java.lang.SecurityException:
attempting to add an object which is not an instance of java.security.Principal
to a Subjec
on runnig the program during the call of method Authenticate.authenticate(env,
subject); giving following exceptions Error: Login Exception on authenticate,
java.lang.SecurityException: attempting to add an object which is not an instance
of java.security.Principal to a Subjec t's Principal Set Authentication Failed:
Unexpected Exception, javax.security.auth.login.LoginExce ption: java.lang.SecurityException:
attempting to add an object which is not an instance of java.security.Principal
to a Subject's Principal Set javax.security.auth.login.LoginException: javax.security.auth.login.LoginExcepti
on: java.lang.SecurityException: attempting to add an object which is not an ins
tance of java.security.Principal to a Subject's Principal Set at examples.security.jaas.SampleLoginModule.login(SampleLoginModule.java
:192) at java.lang.reflect.Method.invoke(Native Method) at javax.security.auth.login.LoginContext.invoke(LoginContext.java:595)
at javax.security.auth.login.LoginContext.access$000(LoginContext.java:1 25) at
javax.security.auth.login.LoginContext$3.run(LoginContext.java:531) at java.security.AccessController.doPrivileged(Native
Method) at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java
:528) at javax.security.auth.login.LoginContext.login(LoginContext.java:449) at
examples.security.jaas.SampleClient.main(SampleClient.java:96)
1)what is the reason for this problem
2)in weblogic document they told to edit server.policy file in webligic\lib folder
a)what the modification is needed in this file..?

Hi jerry
i already got that problem solved by removing jaas.jar file
from class path.
i don'nt how it is working with out in classpath...?
Jerry <[email protected]> wrote:
Hi Nivas,
I think that the problem you are seeing has something to do with the
placement of jaas.jar in your classpath
On WebLogic server, put jaas.jar in the classpath after weblogic.jar.
I would bet that you have it placed before weblogic.jar right now.
I don't think the exception that you're seeing right now has anything
to do with your weblogic.policy file right now, so I think it is
safe to not worry about it right now.
Hope this helps,
Joe Jerry

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error OL-290. Any fixes?

I am using Quicken 2007 (16.1.4) and had no problems before upgrading to OS 10.10 Yosemite. When attempting to download security updates from my financial institutions (UBS and Fidelity), I get the following error: Quicken could not connect to the server. Please try again later. [OL-290] I understand this is because of a mismatch between SSL certificates at the financial institutions and Apple's SSL certificate included with OS 10.10 Yosemite. Any fixes to this issue?

I have the same problem but Q for Mac 2015 does not meet my needs. Is there a fix for this problem?

I have the following errors executing ./emctl secure status agent

Similar Messages

Maybe you are looking for