I have the following massage,404 not found
after loading the home page & when start searching I am reciving a page with this note 404 not found
I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
Similar Messages
-
Error: Listener returned the following Message: 404 Not Found
Hello...I am new to Oracle, and when navigating through Portal it gives me this 404 error message. If possible I need to know where it stems from and how to resolve it.
Please assist.
Thanks in advance.
BenFco. Javier Pozo, from the bug info you provide I assume you are running a version of Portal 9.0.2.x. After having a quick look at the patches you mention I see that patch 2943209 seems to make changes to the WWPOB_PAGE package
As far as your language install commands, the first one looks fine and would have installed language 'e' (spanish I think) in both portal and single sign-on server. So I'm not sure why you ran it a second time to re-install language 'e' into single sign-on server only, but I don't think it would break anything.
I would recommend checking that all your db packages are valid and making aure you didn;t recieve any errors in applying all the actions you listed. If this doesn;t fix the problem then go back to your backup which you would have taken before applying these patches and re-apply them one by one, checling at each stage to see if your Portal is still OK.
Otherwise you should call Oracle Suport and log a TAR as I assume you have access to Oracle support and they are who told you to apply these patches.
Cheers,
Mick. -
Hi Team,
Earlier i had SQL Server 2008 R2 on my Machine. For one work around i unistall SQL Server 2008 R2 and Trying to install SQL Server 2008 but i am not able to install with below error:
TITLE: SQL Server Setup failure.
SQL Server Setup has encountered the following error:
Method not found: 'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()'..
ThanksHi Lydia,
i have followed the above step and i am able to proceed further but while installation i am getting the below error consistently.
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:
Locating the SQL Server Browser service component failed with Windows Installer return code '2'. The component ID: '{2E86FD41-C179-456E-8E6A-5157ED427228}'.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x8510C01B%25400x31BA4472%25401222%254052007
BUTTONS:
&Retry
Cancel
2:
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:
SQL Server Browser configuration for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' was cancelled by user after a previous installation failure. The last attempted step: Retrieving full path to the SQL Server Browser service executable using Windows Installer
API for the SQL Server Browser component with ID '{2E86FD41-C179-456E-8E6A-5157ED427228}'..
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x8510C01B%25400x31BA4472%25401222%254052007
BUTTONS:
OK
After ignoring these step..installation getting complete but ..at the end i am not able to connect to server.
Could you please help me on this.
Thanks,
Sumit -
When tried to login WebConsole for the first time 404 not found error got
Hi All,
We have recently installed MI 7.0(NW2004s) and configured also as per the configuration document. But when we tried to login WebConsole we are getting the error of 404 not found. I donot know what and where I have test to login to WebConsole.
Is there any way how to test to login to WebConsole for the first time.
Appreciate your help.
Regards,
Ameer Baba.Hi Ameer,
Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
Regards,
Satyendra -
Hello,
When I am installing SQL Server 2008 on win7, I encountered an error: SQL Server Setup has encountered the following error: Method not found:'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()‘
What's the metter? What can I do to deal with it?
I need your speed answers.
Thanks,
Vicky SongHello,
Looking at your issue I am wondering if your media is corrupt.
What edition of SQL Server you are trying to install? Did you download that media?
If you downloaded it, perhaps you should try to download it again.
Are you able to install that SQL Server 2008 on another machine without any problem?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
BW: The following objects were not found when accessing server
Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
+
When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.
Thanks for your replyHi Shivraj,
BW 3.5 version
Thanks -
The following objects were not found when accessing server
Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
Can anyone help me with this? Thanks in advance for your replyWhen a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes. -
I was able to access this website prior to 2 weeks ago. I can access this website on other computers without issues, and I can also access all other websites on this computer.
The following is what is listed in the navigation bar when I get the error message.
http://iphantom.com/wisd/restricted.html?fn=Default&FP=l&ip=10.201.5157&ibip=66.206.97.9&ldu=l&re=0&bu=wps.prenhall.com
I noticed it says wisd/restricted, but I can log on to this website using my wisd computer without issue, and I get the same error message at my home/other locations. So I know that it is not restricted. I have used all the other suggestions "no proxy", shut down firewalls, but nothing has worked.
Any help with this matter will be greatly appreciated.
Thank you,
Codygo through this
[[Server Not Found - Troubleshoot connection problems|Server Not Found - Troubleshoot connection problems]] -
Yesterday I got the error message "timed out."
This has been going on for more than two days.Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
404 Not Found, Error: The requested resource does not exist.
Hi all,
When I try to access VC with the http://localhost:50400/vc where 04 is the CE1 instance, it returns the following error:
404 Not Found
Error: The requested resource does not exist.
Any clues. Just to add that the CE1 servers are running green and nwa is accessible on same url.
Regards.Hi
Try with following link (VC should be in Caps) -
http://localhost:50400/VC/default.jsp
Also check whether you have proper admin roles assigned to your user id.
Regards
Sandeep
Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM -
BI Administration cockpit, error 404 Not Found
Hi all,
I just installed the BI administration cockpit. I loaded the TCT cubes and installed the BSP in the portal.
When I execute the templates that the iviews of the BI cockpit use it works fine. However when I execute the cockpit in the portal (executing the iviews) it gives the following error:
404 Not Found. The requested resource does not exist.
Details: Go to main page of this application!
The 7.0 templates/iviews that I created myself are working fine in the portal. Is it possible that this has something to do with the fact that the BI Cockpit is based on 3.x templates? Are there additional settings that I have to do in the portal? I have the same problem with the broadcaster which is also partially based on 3.x templates.
Thanks for your help,
GuusHi Guus,
You may wish to refer the Note 1057129 - '404 Not Found' error when you export a business system.
Note 828474 - Inconsistencies in Application Aliases in HTTP Provider
Hope this helps.
Regards,
Anil -
When I go to yahoo.com or my yahoo, when I click on the email it goes to a blank page with the error message: 404 Not Found
nginx/0.6.32. It only does it on my desktop pc. My IE allows me to acce email without this error.
I can access it on my laptop with no problem. just on my desktop. it started about 3 weeks ago. I even uninstalled and reinstalled mozilla. I had the 5.0 and upgraded to 3.0 and is still doing the same thing.Go to Add or Remove Programs and look for Anti Phishing Domain Advisor. If you click on "Click here for support information" you'll see it is a Panda program. Uninstall it. Solves the problem. Don't know why the Firefox folks aren't telling people this!
-
It seems that no matter which search engine I use - google, yahoo, bing or any of the others, I get the same page 404 not found.
Do a malware check with a few malware scan programs.
You need to use all programs because each detects different malware.
Make sure that you update each program to get the latest version of the database.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
once you double click on the internet the first page that comes up with 404 not found. then when u click to enter what u r looking for in the google and press enter it will come up with the same response 404 not found.
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls -
Error message 404 NOT FOUND occurs
Hi Experts
In cProjects, in accounting tab page when I click on to the open field links( which links to R/3), a new web page is opening with following message :-
"404 Not Found
The requested resource does not exist."
"Details: Go to main page of this application!"
so please kindly help me resolve this matter
thanks in advance
Anand
[email protected]Hi Reema;
thankx for a prompt response.
We have maintained the RFC connection and that is how the a/cing tab page is visible to us.
After that when individual field like "Display order" Tcode "KO03" in SAP R/3 and many others are visible.
But when we click on these links then the above mentioned error is coming.
Please support us to resolve the error asap.
Regards'
anand
Maybe you are looking for
-
Reg: End Date equivalent in OIM 11g
Hi All, In OIM 11g, what is the equivalent of end-date in GTC Flat file reconciliation? What is the format it will accept? Can someone suggest Regards, Karan
-
Hi All, How should I differentiate between End of File and blank space between lines in a file. Below is a sample input for the program: a b c d e f i j k l m nMy following code is able to read only till 'd e f'. Here is the code: Scanner lsc
-
Business objects XI v3 under Unix (AIX or Linux) a bad idea?
Post Author: Ferry Harmusial CA Forum: Deployment Hello everybody, We are planning to upgrade to Business Objects V3 with web-clients and the platform is not yet determined. However, from a press release I understood that Linux support for Business O
-
Hi can any one please help me.... I cant do my face book or watch some movies. My ipad2 needs adobe flash player and it wont allow that application to be downloaded has any one got any suggestions please. Please help me as im a newbie at this thanks.
-
Can I get mountain lion on disc
Can I buy Mountain Lion on disc?