I have the following system and want to run Elements12 or 13 efficiently; Vista Home Premium 32bit, Intel core 2duo E4500@2.2GHZ, 3 GB RAM DDR2, Mobo MSI MS-7267 and on-board graphics chipset. I tried to run Elements9 and was rather slow so you can imagin

I have the following system and want to run Elements12 or 13 efficiently; Vista Home Premium 32bit, Intel core 2duo [email protected], 3 GB RAM DDR2, Mobo MSI MS-7267 and on-board graphics chipset. I tried to run Elements9 and was rather slow so you can imagine Elements12 or 13..... Do I have to change the whole system or just buy a suitable VGA card? Which card would be OK for this system? Thanx..

stavrosd
NVIDIA GT730
GeForce GT 730 | Specifications | GeForce
I think that the key here is going from a 32 bit to 64 bit computer operating system where Premiere Elements 11, 12, or 13 can become 64 bit application in a Windows 7 or 8.1 64 bit computer operating system. The increased computer resources implication of that should increase the frequency of getting the larger project taken to a successful complete more than before. A lot of this has to do with multitasking potential.
Premiere Elements does not support CUDA as seen in high end video cards/graphics cards. Since Premiere Elements 9, Premiere Elements has no GPU accelerated effects. But, I would decide on the best card for you based on overall computer rather than just for use in Premiere Elements. If you are interested in computer games, that will impact your card decision.
The use of a non super NVIDIA or ATI card should work for you. But, I have used neither.
I would consider more installed RAM, depending on your computer motherboard slots.
You might want to discuss the choice of the card with NVIDIA.
Compare and Buy GPUs | GeForce
I suspect that
My desktop and laptop computer both use the integrated Intel HD Graphics where my strengths included installed RAM, free hard drive space, and computer processor.
Please consider. Any questions, please do not hesitate to ask.
Thank you.
ATR

Similar Messages

I have a Pavilion dv7-1050ea with windows vista home premium 32bit.Windows will not start

Windows will not start in safe mode just back to blue screen error. HP recovory disks not working even in external drive. no access to command prompt. unable to install or run programs or copy any files to the hard drive. ran start up tests Memorypassed Primery hard disc passed Hard disk passed smart hard disc passed.

I would recommend performing a system recovery.
Here is a link with the information that is needed to perform this: http://goo.gl/bbxlv
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

System Restore will not run on Vista Home Premium

I cannot get system restore to run on my T61 using Vista Home Premium I get messages like:
"The Restore point could not be created for the following reason: The writer experienced a transient error. If the backup process is retried the error may not reoccur". It did.
I also get "Rescue and Recovery Backup Service stopped working and was closed. A problem caused the applicaion to stop working correctly. Windows will notify you if a solution is available." It did not.
I have also been advised no restore points are available.
The net effect is I cannot use System Restore at all!
Has anyone else had a problem like this with system restore? Lenovo has been no help.I have had a number of Dell computers and this is my first (and last) Lenovo. When it was quite new and the problem occurred , I contacted them but they just blew me off..
RHM

So i assume that your T61 originally came with Vista Home premium installed??? Did you make the Recovery Media disks when you first got your machine??? If not call Lenovo up and obtain those disks, and then use them to reinstall your service partition and your OS.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Replacing Motherboard on HP Media Center PC running Windows Vista Home Premium (32-bit)

Running OEM version of Windows Vista Home Premium (32-bit) on an HP Pavilion Media Center m8226x Desktop PC. Replacing motherboard ASUS M2N68-LA Motherboard 6150SE HP Narra2-GL8E with an MCP61PM-HM (Nettle2) motherboard due to failure. Both boards have same chipset and form factor. Can I just replace board without reinstalling windows? Do I need to install new drivers? I don't have an install CD or install key, would Microsoft provide a key if needed? Is there a link I can reference for MB replacement/ install?
Thanks for you assistance!
HC
This question was solved.
View Solution.

The OEM license is tied to the original motherboard version, ie M2N68-LA. You lose the OEM "rights" when you changed the board.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Just got a new computer running windoews vista home premium.

Just got a new computer running windows vista home premium. I downloaded itunes with no problems, ran it, no problems. Then turned off my internet connection and computer. Next time I turned on my computer, I could not connect to the internet. There is no problem with the ISP or the computer (all have been checked). If I uninstall itunes, everything is back to normal, internet connection is fine. I have tried a few times to install itunes (which is easy to do), but my computer will not let me access the internet while itunes is installed on the computer. Any ideas as to why this happens and what I can do about it? Many thanks for any help anyone can give.

Look into the Security control panel for the firewall settings and the list of applications allowed to access the Internet. I think you can tap the Windows key and type "firewall" to be shown the panel immediately.
I just got a new computer with Vista Home Premium too. The first time I ran iTunes, Windows brought up a Windows Firewall warning asking me if I wanted to allow iTunes through. People tend to blow by these popups but they're very important. Often Windows will not ask again, and you have to go digging to get to the option later. Reinstalling the app won't necessarily help because Windows would think that the app you already blocked is just trying to get through again, so it blocks it again.
When I view the list of permitted apps for the Windows Firewall, I see many entries with "iTunes" in the name, each probably governing a separate network feature (sharing, purchasing, artwork, track lookup).

I want to download a trial of in design, but it states i do not have the right system requirements? I am running windows xp, is this to old?

I have been trying to download in design and it keeps thinking, thinking, thinking and then does nothing..
So then i tried to go online and download a trial version from there and then it states i don't have the right system requirements, i am running windows xp, is this program to old? i dont understand as the system requirements online state that you can use windows xp, not sure whats going on.. Help please

The latest versions of InDesign will not run on XP. Here is a link to a page that lists the system requirements for most versions of InDesign. As you will see CS6 will run on XP and is still being sold if you would like to try that out.
Purchase CS6 products:
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html
You can download the 30 day trial version of the software thru the page linked below and then use your current serial number to activate it after you make the purchase (if you do).
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

When I use the export function of quicktime nothing append and I have the following error message on the console : QuickTime Player[1723]postExceptionEvent caught non-fatal NSInvalidArgumentException

When I use the export function of quicklime (export to iPad,iPhone, Apple TV ... format), nothing append and I have the following error message on the monitor windows, (I'm using quicktime Version 10.4 (833) with OS X Yosemite ):
06/11/2014 22:22:03,507
QuickTime Player[1723]
postExceptionEvent caught non-fatal NSInvalidArgumentException '*** -[NSDictionary initWithObjects:forKeys:]: count of objects (0) differs from count of keys (4)' with backtrace (
0   CoreFoundation                      0x00007fff8ac6564c __exceptionPreprocess + 172
1   libobjc.A.dylib                     0x00007fff8924f6de objc_exception_throw + 43
2   CoreFoundation                      0x00007fff8ab98dcd -[NSDictionary initWithObjects:forKeys:] + 941
3   Foundation                          0x00007fff8a6a8bcc -[NSDictionary(NSDictionary) initWithCoder:] + 245
4   Foundation                          0x00007fff8a686150 _decodeObjectBinary + 2872
5   Foundation                          0x00007fff8a6854a6 _decodeObject + 278
6   Foundation                          0x00007fff8a6a9921 -[NSKeyedUnarchiver decodeObjectOfClasses:forKey:] + 173
7   Foundation                          0x00007fff8a75f2b4 -[NSError initWithCoder:] + 253
8   Foundation                          0x00007fff8a686150 _decodeObjectBinary + 2872
9   Foundation                          0x00007fff8a6854a6 _decodeObject + 278
10 Foundation                          0x00007fff8a6ab0c9 +[NSKeyedUnarchiver unarchiveObjectWithData:] + 89
11 QuickTime Player                    0x000000010dcd8253 QuickTime Player + 758355
12 QuickTime Player                    0x000000010dc8981f QuickTime Player + 436255
13 QuickTime Player                    0x000000010dc894fb QuickTime Player + 435451
14 QuickTime Player                    0x000000010dc6ce48 QuickTime Player + 319048
15 AppKit                              0x00007fff93c5d75a __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke1714 + 113
16 AppKit                              0x00007fff93c4efca -[NSDocument continueActivityUsingBlock:] + 323
17 AppKit                              0x00007fff93c5d5cb __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke_21706 + 458
18 AppKit                              0x00007fff93c5d0ec __85-[NSDocument runModalSavePanelForSaveOperation:delegate:didSaveSelector:contextInfo:]_block_ invoke1690 + 1365
19 AppKit                              0x00007fff940903b6 -[NSVBSavePanel didEndPanelWithReturnCode:] + 68
20 AppKit                              0x00007fff9409323d -[NSVBSavePanel didEndSheet:returnCode:contextInfo:] + 154
21 AppKit                              0x00007fff93f718d9 -[NSWindow _endWindowBlockingModalSession:returnCode:] + 315
22 AppKit                              0x00007fff9409307c -[NSVBSavePanel observeValueForKeyPath:ofObject:change:context:] + 560
23 Foundation                          0x00007fff8a677c73 NSKeyValueNotifyObserver + 382
24 Foundation                          0x00007fff8a676e48 NSKeyValueDidChange + 463
25 Foundation                          0x00007fff8a67b9ad -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 118
26 ViewBridge                          0x00007fff959cbbd7 -[NSViewBridge nonLocalChangeInProgress:block:] + 382
27 ViewBridge                          0x00007fff95a15766 -[NSRemoteViewMarshal exceptionSafeSetRemoteObject:forKey:withReply:] + 275
28 ViewBridge                          0x00007fff95a158f1 -[NSRemoteViewMarshal setRemoteObject:forKey:withReply:] + 56
29 CoreFoundation                      0x00007fff8ab3e33c __invoking___ + 140
30 CoreFoundation                      0x00007fff8ab3e192 -[NSInvocation invoke] + 290
31 ViewBridge                          0x00007fff95a1bce3 __deferNSXPCInvocationOntoMainThread_block_invoke + 85
32 ViewBridge                          0x00007fff95a1b91e __deferBlockOntoMainThread_block_invoke_2 + 390
33 CoreFoundation                      0x00007fff8ab8354c __CFRUNLOOP_IS_CALLING_OUT_TO_A_BLOCK__ + 12
34 CoreFoundation                      0x00007fff8ab75655 __CFRunLoopDoBlocks + 341
35 CoreFoundation                      0x00007fff8ab75196 __CFRunLoopRun + 1814
36 CoreFoundation                      0x00007fff8ab74838 CFRunLoopRunSpecific + 296
37 HIToolbox                           0x00007fff8cb6f43f RunCurrentEventLoopInMode + 235
38 HIToolbox                           0x00007fff8cb6f1ba ReceiveNextEventCommon + 431
39 HIToolbox                           0x00007fff8cb6effb _BlockUntilNextEventMatchingListInModeWithFilter + 71
40 AppKit                              0x00007fff9383b821 _DPSNextEvent + 964
41 AppKit                              0x00007fff9383afd0 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 194
42 AppKit                              0x00007fff9382ef73 -[NSApplication run] + 594
43 AppKit                              0x00007fff9381a424 NSApplicationMain + 1832
44 libdyld.dylib                       0x00007fff8ec845c9 start + 1
timestamp: 22:22:03.507 Thursday 06 November 2014
process/thread/queue: QuickTime Player (1723) / 0x7fff78cd0300 / com.apple.main-thread
code: line 844 of /SourceCache/ViewBridge/ViewBridge-99/ViewBridgeUtilities.m in logCaughtException
#exceptions
06/11/2014 22:22:03,525
com.apple.appkit.xpc.openAndSavePanelService[1748]
remote view failed to set bridge object {
    URL = "file:///Users/pascalgros/Documents/Videos%20Maurice%202013/Exports/M2U01020.m4 v";
    URLs =     (
        "file:///Users/pascalgros/Documents/Videos%20Maurice%202013/Exports/M2U01020.m4 v"
    index = 1;
    result = 1;
} for key most-recent-completion due to Error Domain=com.apple.ViewBridge Code=8 "L’opération n’a pas pu s’achever. (com.apple.ViewBridge erreur 8)." UserInfo=0x61000006ebc0 {com.apple.ViewBridge.error.hint=most-recent-completion, com.apple.ViewBridge.error.description=NSViewBridgeExceptionError}; service call stack was (
0   ViewBridge                          0x00007fff959e8b30 -[NSViewServiceMarshal setRemoteObject:forKey:] + 341
1   Foundation                          0x00007fff8a677c73 NSKeyValueNotifyObserver + 382
2   Foundation                          0x00007fff8a676e48 NSKeyValueDidChange + 463
3   Foundation                          0x00007fff8a67b9ad -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 118
4   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a661407 com.apple.appkit.xpc.openAndSavePanelService + 9223
5   AppKit                              0x00007fff93dead5a -[NSSavePanel _dismissModeless:] + 109
6   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a66191c com.apple.appkit.xpc.openAndSavePanelService + 10524
7   AppKit                              0x00007fff93ded580 -[NSSavePanel ok:] + 449
8   com.apple.appkit.xpc.openAndSavePanelService 0x000000010a661952 com.apple.appkit.xpc.openAndSavePanelService + 10578
9   libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
10 AppKit                              0x00007fff93a0a5e7 -[NSApplication sendAction:to:from:] + 410
11 AppKit                              0x00007fff93a0a410 -[NSControl sendAction:to:] + 86
12 AppKit                              0x00007fff93bdedaf __26-[NSCell _sendActionFrom:]_block_invoke + 131
13 libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
14 AppKit                              0x00007fff93a52f2c -[NSCell _sendActionFrom:] + 144
15 AppKit                              0x00007fff93bc5ab2 -[NSButtonCell _sendActionFrom:] + 39
16 libsystem_trace.dylib               0x00007fff8d3ebcd7 _os_activity_initiate + 75
17 AppKit                              0x00007fff93a6da66 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 2731
18 AppKit                              0x00007fff93a6ccc1 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 491
19 AppKit                              0x00007fff93a6c289 -[NSControl mouseDown:] + 714
20 AppKit                              0x00007fff93f65fef -[NSWindow _reallySendEvent:] + 12827
21 AppKit                              0x00007fff939f065c -[NSWindow sendEvent:] + 368
22 AppKit                              0x00007fff939a21e6 -[NSApplication sendEvent:] + 2238
23 ViewBridge                          0x00007fff959d18ab -[NSViewServiceApplication sendEventWithoutCatch:withForwarding:] + 652
24 ViewBridge                          0x00007fff959d1fbd -[NSViewServiceApplication sendEvent:withForwarding:] + 29
25 AppKit                              0x00007fff9382efe8 -[NSApplication run] + 711
26 AppKit                              0x00007fff9381a424 NSApplicationMain + 1832
27 libxpc.dylib                        0x00007fff88837ef2 _xpc_objc_main + 793
28 libxpc.dylib                        0x00007fff88839a9d _parse_sysctl_once + 0
29 ViewBridge                          0x00007fff95a20165 xpc_connection_handler + 0
30 ViewBridge                          0x00007fff959d4ff7 NSViewServiceApplicationMain + 1892
31 com.apple.appkit.xpc.openAndSavePanelService 0x000000010a665035 main + 208
32 libdyld.dylib                       0x00007fff8ec845c9 start + 1
33 ???                                 0x0000000000000001 0x0 + 1
timestamp: 22:22:03.525 Thursday 06 November 2014
process/thread/queue: com.apple.appkit.xpc.openAndSavePanelService (1748) / 0x7fff78cd0300 / com.apple.main-thread
code: line 3847 of /SourceCache/ViewBridge/ViewBridge-99/NSViewServiceMarshal.m in __47-[NSViewServiceMarshal setRemoteObject:forKey:]_block_invoke_2
#communications_failure

Hi,
have you tried to connect on the command line (instead of using R3trans) ?
db2 connect to AE1 user sapae1 using .....
If this works and you have verified that the DB2DB6EKEY is set properly, use dscdb6up to update the password in the password file dscbd6.conf.
Then try again to use R3trans to connect.
Best regards,
Jens

When trying to delete files, I get the following message, 'Finder Wants to make changes. Type your password to allow this.'

I'm running Mac OS X Version 10.7.4 on my iMac and am suddenly unable to simply move files to the trash.
Instead, I get the following message: 'Finder wants to make changes. Type your password to allow this.'
When I do enter my password, the file does not enter the Trash but seems to disappear.
I tried to find ways to revert to previous settings that allowed me to move files to the trash, but had trouble doing so.
How can I get my iMac to run normally?
Cheers!

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. i rang Applecare a

A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.

Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past.

I bought iPhone 6 Plus few days ago and I have the following problems: 1) When entering through Safary to Google Images and tap on each on of them they do not enlarged nor I am able by click on them to enter into the connected website

I bought iPhone 6 Plus few days ago and I have the following problems:
1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
I would highly apreciate any help
Kind Regards

I bought iPhone 6 Plus few days ago and I have the following problems:
1) When entering through Safary to Google Images and tap on each one of them they do not enlarge nor I am able by click on them to enter into their connected website
2) When I receive an e-mail with images I cannot easily save them in my gallery. It needs more than 10 tabs to the window "save this image" or "save all 3 images" and if I am lucky it saves one image. This is very frustrating, I loose a lot of time trying and affects my job.
I would highly apreciate any help
Kind Regards

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are n

I have an iMac OS X ver 10.7.5. Processor speed is 3.06 GHz intel core i3, and the memory is 4 GB 1333 MHz RAM. My online banking app is being updated and requires OS ver 10.8 or newer. When I ask for available updates, the system says there are none available. How can I update my system to ver 10.8 or newer to accommodate the new banking app?

You can update directly to Yosemite (for free) through the App Store (this is 10.10). Make sure your existing applications will run on this OS.
If you wish to stay at 10.8, you can order this through the online Apple Store (it's $20), and they will email you a redemption code to be used on the App Store.
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
Matt

Hello everybody, I have the following problem: my apple id was desabled for security reason and I have to reset my password to enable the account again, but when I try to do this, using the e-mail, I've never received such e-mail. When I chose to do

Hello everybody, I have the following problem: my apple id was desabled for security reason and I have to reset my password to enable the account again, but when I try to do this, using the e-mail, I've never received such e-mail. When I chose to do this by the security answers, it's not work again, because does not accept my birth date. Can you please somebody help with this issue? Thanks in advance

If you have a rescue email address on your account then you've checked the inbox and spam folder on that account as well, and you've tried requesting the email again ? If you still can't find it then try contacting Support in your country and see if they can reset it for you.
Contacting Apple about account security : http://support.apple.com/kb/HT5699

I have the following Apple Computer: Dual 1.25 GHz PowerPC G4, 2 MB per processor. Can I put install new Intel Xeon processors in place of the current ones to bring my Mac up to the MacPro standards and so I can install the new Mac software?

I have the following Apple Computer: Dual 1.25 GHz PowerPC G4, 2 MB per processor. Can I put install new Intel Xeon processors in place of the current ones to bring my Mac up to the MacPro standards and, if so, can I then install the new Mac software (Lion)?

As has been clearly stated, no, no, and no.
If such an upgrade were possible, it probably would be more money than it would be worth.
If you're running a G4 (dual-processor even) you can pick up a used Mac mini (intel that is, and something from 2010 or newer would be the best bet) that will be screaming fast compared to a G4.
Once upon a time, processor upgrades were not only possible, but a good deal, and a relatively inexpensive way to get more life out of your Mac. I upgraded a G3 tower to a G4 for few hundred dollars, and I was glad I went that route at the time. Finally, CPU upgrades, at least as far as I know, aren't available anymore.

HT4053 Hi on my iPad Desk Top I have the following message: 2This iPadhasn't been backed up in 2 weeks Backups happen when the iPad is plugeed locked, and connected in, locked, and onnected to WI-fI. Tapping ok doesn't do anything

Hi on my IPad Desk top I have the following message:
"This iPad hasn't been backed up in 2 weeks> Backups happen when the iPad is plugged in, locked and connected to Wi-Fi. When I tap Ok nothing happens.
The slide to unlock doesn't work wither. Can you help, please?

Basic troubleshooting is reset, restart, restore (first from backup then as new). Has any of this been tried?
Just FYI, this is the iPhone forum.

We have the enterprise system on our office computer and I have one iphone and 2 ipads. One iphone and one ipad2 is mine and the other is my wife's. We share a common password for the ipads. How do I update to ios5?

I think this is rather complicated and I really need some help. I am the pastor of the church and we have the enterprise system. We use an exchange server if that means anything. I began with an iPhone 4 that connects with our system. And now I have to iPads. One of the iPads is registered in my name and the other in my wife's.
I'm confused as to how to update to IOS 5. Do I keep my password is the same for both my wife's and my iPad?
Also because we are on the enterprise system, my notes from Outlook do not wirelessly connect from my work computer to my iPhone and to my iPad. I have been told that they have not worked this out yet. Will this change with the new operating system?
It all is very confusing to me and I would appreciate some help. Thank you very much

I think this is rather complicated and I really need some help. I am the pastor of the church and we have the enterprise system. We use an exchange server if that means anything. I began with an iPhone 4 that connects with our system. And now I have to iPads. One of the iPads is registered in my name and the other in my wife's.
I'm confused as to how to update to IOS 5. Do I keep my password is the same for both my wife's and my iPad?
Also because we are on the enterprise system, my notes from Outlook do not wirelessly connect from my work computer to my iPhone and to my iPad. I have been told that they have not worked this out yet. Will this change with the new operating system?
It all is very confusing to me and I would appreciate some help. Thank you very much

I have the following system and want to run Elements12 or 13 efficiently; Vista Home Premium 32bit, Intel core 2duo E4500@2.2GHZ, 3 GB RAM DDR2, Mobo MSI MS-7267 and on-board graphics chipset. I tried to run Elements9 and was rather slow so you can imagin

Similar Messages

Maybe you are looking for