I have the HP G72-259WM Notebook PC , Product Number: wq668ua which has worked out great for me.
I have the HP G72-259WM Notebook PC , Product Number: wq668ua running WIndows 7 (64bit) With 4GB of RAM and 1695MB video Ram. I just purchased a game (Star Wars: The Old Republic) and my laptop meets all the requirement stated on game accept one that I did not understand see until after the purchase. The Graphic card needs to run Shader 3.0 or greater. My Laptop is now out of warrenty and would like to upgrade my hardware. Can I either purchase a motherboard or graphics card in order to run this game instead of buying a whole new system? Note: the game states that there are a few different cards that work with this game and wonder if there is something equal to, or a little better that match there capibility that I can use? They are the ATI/AMD Radeon HD 4850, or NVIDA GeForceGTX 260 /512MB graphic cards.
I would like to use the all the same hardware with a new motherboard... unless the graphic card is seperate and if so can you tell me what I need to get and where? Thanks
Hi,
Whay you have to post same question on many places ? Please use this:
http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/Upgrade-Graphics-Do-I-replace-motherboar...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
I have the Ipod Nano. I’m traveling to Australia which has the following current:240V AC, 50Hz. I have a travel plug adapter for the Australian electricsockets. Will I be able to use my Ipod charger with an Australian travel plugadapter or will I also need a voltage converter? Australia which has thefollowing current: 240V AC, 50Hz.
I have the Ipod Nano. I’m traveling to Australia which has the following current:240V AC, 50Hz. I have a travel plug adapter for the Australian electricsockets. Will I be able to use my Ipod charger with an Australian travel plugadapter or will I also need a voltage converter? Australia which has thefollowing current: 240V AC, 50Hz.
-
What am I to do? I have stupidly downloaded Yosemite and now I have a useless piece of Junk called a MacBook. Somebody help me please, in words I can understand
You could post the output from EtreCheck
<https://discussions.apple.com/docs/DOC-6174>
Many times Yosemite performance problems are caused by 3rd party additions that do not play well in the Yosemite environment. EtreCheck will list these 3rd party addtions.
Also Yosemite really needs 4GB, if not more RAM.
You should also look at Applications -> Utilities -> Console and see if there are frequently repeating log messages. This might indicate a sub-component that is having problems.
If you have anti-malware software, Mac cleaning software, or memory cleaning software, these frequently cause problems. -
Until recently I have owed 2 iPod Classics - 2007 80gb and 2009 160gb (which has since been returned as it had a very noisy hard drive).
How do I transfer the library from the 160gb to the 80gb in iTunes using Windows Vista.
Nothing seems to help on the Apple support pages, so any help would be appreciated
ThanksThanks for the reply, but not actually sure how to sync a second iPod with the library of the first, as I thought it would not recognise a new iPod for copyright reasons.
Also, the files are in a location on the pc but I had to do lots of formatting amendments in iTunes as most of the stuff was on mp3 files and the formatting was all over the place. I did not want to loose any of the work by simply asking the new iPod to look at the original file and would rather copy en masse from one device to another.
Any help or pointers greatly appreciated
Thanks -
I have the 1st generation ipod touch i installed an update which now it is 3.1.3 version i was able to put my apps on it but when i want to use the apps it will not let me use them. What do i need to do?
Does it happen with the apps that came with the iPod?
Does it happen with all apps you have downloaded/installed?
Have you ried deleting the apps and redownload/install the apps? You will not be charged again if you are signed into the same iTunes account that originally purchased the apps.
Next would be to restore from backup
Last would be to restore to factory defaults/new iPod. -
I no longer have the computer my ipod touch was sinked too, my ipod has now crashed, when conected to my latest pc it states this computer is not the supervisor pc for this device, can anyone help
iOS: Unable to update or restore
Read the article Put it in recovery mode -
Need help I have iPhone (iOS x 7 was the last software update ) I need to install a flashplayer to view links in my email but I don't know which product try or which one works for my mobile device iphone 4....plz help
Hi shannonr98244154,
Flash player is not supported on mobile devices
-Varun -
I have downloaded the latest Adobe Flash on my laptop and it is not working on safari for youtube.I have uninstalled and installed it multiply times and it still wont show me youtube videos
Enable Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
Press " Manage Website Settings" button for more options. -
i have bought a used macbook, to bad i do not have the admin password. is there any way to bypass this issue with out the Mac OS X disk? (without loosing my obtained files?) I NEED HELP BADLY PLEASE....
What version of the Mac OS X are you running. Go to the Apple in the upper left corner and select About This Mac and post the version.
-
I have several episodes of a TV show where it says download error, tap to retry and when I do it repeats the error message. Can I get it to work or get reimbursed for the ones I'm missing? I'm using an iPad 1 which has worked fine for all the others.
Hi AlpineJean,
I'm sorry to hear you are having issues downloading some episodes to your iPad.
I would first suggest you sign out of your iTunes account on your iPad, restart the device and sign back in.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
Click on the link below for additional troubleshooting steps with more details and screenshots.
I've quoted some helpful highlights for you:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To view or download previously purchased:
TV Shows on iOS
Open the iTunes Store on your device.
Make sure you are signed in with the same Apple ID you used for the original purchase.
Tap More from the bottom navigation bar.
Tap TV Shows.
Locate the TV show episode or series you would like to download.
Once you've located the TV shows you are looking for, tap the download button.
The TV show will begin downloading.
Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.
If this does not resolve your issue, please follow these instructions for support from the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Have a great day!
- Judy -
Several contacts have the same email address. How can I choose which contact name appears on the address line in Mail?
you can't really, but you might be able to filter them by message content into folders for each, or color them with tags
-
im trying to restore my iphone and itunes doesnt allow it to restore without updating. problem is that i have the latest update on my iphone so why is it forcing me to wait for a 7hr update download when i already have the update and only need to restore?
Sadly, the iPhone 3G can not be upgraded beyond iOS 4.2.1.
-
I usually have iCloud backup but I got a notification that my phone has not backed up for the last two weeks, and It wont let me do it manually.There is also still enough storage space. Why did it all of a sudden stop backing up?
The HT1766 article you attached lists the prerequisites for an iCloud backup:
iCloud automatically backs up the most important data on your device using iOS 5 or later. After you have enabled Backup on your iPhone, iPad, or iPod touch in Settings > iCloud > Backup & Storage, it will run on a daily basis as long as your device is:
Connected to the Internet over Wi-Fi
Connected to a power source
Screen locked
You can also back up manually whenever your device is connected to the Internet over Wi-Fi by choosing Back Up Now from Settings > iCloud > Storage & Backup. -
Hi,
I have the old MacBook Pro. Upgraded to Mountain Lion which completely wrecked the system. So downgraded to Snow Leopard.
Then updated the combo update. Now stuck on blue screen at start-up.
Need help. Greatly appreciated. Thank you.Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
Thanks in advance.
EtreCheck version: 1.9.15 (52)
Report generated 19 September 2014 08:07:14 GMT+8
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
Disk Information: ?
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
[loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
[loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[running] com.sophos.autoupdate.plist Support
[running] com.sophos.configuration.plist Support
[running] com.sophos.intercheck.plist Support
[running] com.sophos.notification.plist Support
[running] com.sophos.scan.plist Support
[running] com.sophos.sxld.plist Support
[running] com.sophos.webd.plist Support
[running] com.trusteer.rooks.rooksd.plist Support
Launch Agents: ?
[loaded] com.divx.dms.agent.plist Support
[loaded] com.divx.update.agent.plist Support
[running] com.sophos.uiserver.plist Support
[running] com.trusteer.rapport.rapportd.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[running] com.amazon.music.plist Support
[loaded] com.google.keystone.agent.plist Support
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
User Login Items: ?
iTunesHelper
TomTomHOMERunner
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins: ?
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
EPPEX Plugin: Version: 10.0 Support
Default Browser: Version: 537 - SDK 10.9
OVSHelper: Version: 1.1 Support
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
Safari Extensions: ?
Ultimate
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Perian Support
Trusteer Endpoint Protection Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 99
Oldest backup: 2012-04-20 17:05:32 +0000
Last backup: 2014-09-18 23:49:25 +0000
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
6% InterCheck
5% iCalExternalSync
3% WindowServer
2% CalendarAgent
2% SystemUIServer
Top Processes by Memory: ?
152 MB SophosScanD
147 MB InterCheck
106 MB SophosAntiVirus
66 MB Dropbox
57 MB com.apple.iTunesLibraryService
Virtual Memory Information: ?
161 MB Free RAM
1.55 GB Active RAM
1.41 GB Inactive RAM
902 MB Wired RAM
611 MB Page-ins
0 B Page-outsUninstall Trusteer software
http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
Remove Sophos
https://discussions.apple.com/message/21069437#21069437
Maybe you are looking for
-
Acrobat X Pro: Check for Updates Error 1007 Updates have been disabled by your system policy
Because of another Acrobat problem (I won't go into here), today I uninstalled Acrobat Pro 10.1.9 and re-installed Acrobat 10.0.0. I thought I could get back to 10.1.9 by selecting "Check for Updates" after installation. My system is Win7x64 and I'm
-
AirBrowser - How to clear existing session value?
Hi, We face the below mentioned problem. Would be great if someone could help us. Due to problems with uploading the attachment here, please send a email to the following email-id ([email protected]) and I shall send the attachment in response. WEBKi
-
Has anyone used a 3rd party service called MQUBE?
My last Verizon Wireless bill shows a charge of $9.99 for a 3rd pary vendor called MQUBE. I did not purchase this service and the charge has been removed. But there are lots of complaints about the company - see http://classactionconnect.com/cell_p
-
Hi all in F-58 i am not getting tax ded amount in payment
-
USB PIC18f4550 %26 a standalone installer
I want to be able to make a standalone installer of a labview application that sends information to PIC18f4550, via USB, if a condition is met. The thing is that I want to be able to use this device in different usb ports and in different computers,