I have the Huawei S7 tablet running Android 2.1-update 1 and when I try to launch Firefox for Android it returns to the home screen. Anyone else have this problem?
I can install the application although it will not launch. I get the firefox logo before it returns to the application screen. When I check to see if it is running it is not listed.
Thanks for the report. We haven't tested Firefox on this device, and I'm not sure why it is crashing on startup. If you'd like to help us find out more, you can try both the ARMv6 and ARMv7 nightly builds at https://wiki.mozilla.org/Mobile/Platforms/Android
Similar Messages
-
my ipad randomly shut off and when i go to turn it on it shows a cord connecting to the itunes symbol, my ipad is not disabled by the way. has anyone else had this problem? if so does anyone know how to fix it?
Glitchs like that sometimes happen
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If sit still reocurrs a lot, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
IiPad air2 suddenly freezes, the screen goes black but the sound is still on, I have taken it back to factory settings and it was OK then yesterday it froze again, only plugging it into my IMac got it going again. Anyone else got this problem?
Greetings jupiejupie,
Welcome to the Apple Support Communities!
I understand that your iPad is sporadically becoming unresponsive and the screen is turning black. In this situation, I would recommend reading over and working through the suggested steps in the attached article.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Cheers,
Joe -
Just this week I started to experience trouble with sending emails from my iPhone. I get the message 'Recipients rejected by the server'. Has anyone else experienced this problem and if so, do you have a fix?
Thank you.You should think about buying a protective case for your device.
Screen repair service pricing
Repair and replacement costs depend on your iPhone model and your AppleCare product coverage. Apple will run a diagnostic test to determine whether your iPhone has experienced additional damage. If it has, or if it needs other repairs, you may need to pay an out-of-warranty service fee. Accidental damage isn't covered under the Apple One Year Limited Warranty.
Model
Screen repair cost
iPhone 6
$109
iPhone 6 Plus, iPhone 5s, iPhone 5c, iPhone 5
$129
Plus a $6.95 shipping fee, if required. Fees are in USD and exclude local tax. Pricing is for service through Apple. The final service fee we charge will be determined during testing. Pricing and terms vary for service through an Apple Authorized Service Provider.
copied from Service Answer Center - iPhone -
Obviously Ive had the same errors originally but the software has updated fine now. But for some reason the music on the phone will not play atall! with or with out headphones. It seems too just be staying at 0.00mins and even if I fast forward it it just stays at the particular mins fast forwarded to. Has anyone else had this problem?
Similar symptom here. I gathered from other threads that by removing all the songs and re-sync them back to iPhone4 would sort the problem! I tried with one album and it seemed to have work fine! So I removed all the songs and transferred them back again! However, I could not launch Music app any more! Click on Music and it just stopped, i.e. could not be launched!!!
However, I noticed that I could still play all the songs through headphone control. But if you play without the headphone plugged in, no sound comes out of the phone speaker!!!!!
Aarrrgggggghhhhhhhhhhhhhh!!!!!!!!
Apple - surely you must seriously look into this and come out with resolutions by now! Would SJ step in by now????? RIP SJ! Apple, in fact all of us, miss you - with diferent reasons !!! -
After updating to ios 7.0.4, my ipad air will not allow me to turn on the wifi in the settings, and the bluetooth constantly shows a spinning gear in the settings. I'm currently trying to restore factory settings on the ipad for the second time. Powering off did not help. Anyone else having this problem or know of a solution?
I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup. -
If I am playing a song in iOS 7 while the phone is locked, unlocking the phone seems to cause the Music app to skip to a different part of the song. It seems to be a random placement, sometimes ahead; sometimes back; sometimes very close to where it was, but rarely a continuous feed. Anyone have a clue what might be happening? Shake to Shuffle is off, only the Home Button has been touched. I also noticed that the display on the lock screen may be indicating where the playback will go once the phone is unlocked. Thanks for your help!
In reading other threads, I found a few that recommend a hard reset to solve the issue. I have tried it, and thus far haven't expereienced the problem again. Hopefully that's it then
-
Yesterday I downloaded iOS 6 in all innocence and since then my iBooks app will only appear in German. Surely it is possible to choose the language you read in? Will everyone who leaves the UK or USA find the iPad automatically chooses the language of the connection being used?? Ridiculous! Does anyone know how to sort this out?? Maybe Apple do?
rjg030585 wrote:
I told the guy I was not willing to give up my unlimited plan AND pay full price for the phone, I thanked him for his time and we left.
Here is my advice, at least. Not sure if anyone will agree, but it is my take on the problem.
With the Edge program, there is a "possibility" that someone will pay full price for a phone. This is not always the case, though. IF you do not complete ALL of the 24 months of payments, then you WILL NOT have paid full price for the phone, but simply a portion of the full price. THAT is why it does not make the plan "eligible" to keep your unlimited data. With the Edge plan, technically you only have to pay 50% of the full price before you can trade it in for another phone on the Edge plan. The way the plan is designed, the majority of people WILL NOT ever pay full price for the phone, but only a portion of the full price before they exchange their phone for a new device. That is what Verizon is hoping for, at least.
As Ann154 has pointed out, you can use the Device Payment Plan and keep your unlimited data. At no time during your contract can you trade THAT phone in to get another phone. You would have to continue making the payments on THAT phone along with any other phone you upgraded to. THAT is the difference between the 2 plans. You WILL end up paying full price for the phone on the Device Payment Plan, where you can STOP making payments on a phone with the Edge Plan if you turn it in for another device.
Good luck. -
Firefox has been running fine until this upgrade, but now I cannot lauch the client at all because it forces me to restart my machine.
Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo nvram boot-args=""
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command. -
I have downloaded the new iTunes 10.7 on my computer with windows vista on it. Now every time I try to run a video it shuts off iTunes. Is anyone else having this problem? I have uninstalled and reinstalled the program twice. Is there a fix? Is it possible I am missing part of the program?
I'd start with the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
I am running OSX 10.6.8 and when I try to install the latest security update there is an unknown error and the update cannot be implemented. I still have to restart my computer each time I try. Is anyone else experiencing this problem?
I tried using the downloaded update. It still didn't work but at least I did not have to restart my computer. The message was a little different too: "The installation failed. The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."Run through this list of fixes, either something is corrupted or you have malware that's blocking the update.
..Step by Step to fix your Mac
Make sure to backup your users files to a external storage drive first (not only TimeMachine as it may fail to restore) and disconnect, because if' it's a drive corruption/failing then the entire thing will either have to be replaced or a wipe and install done.
Most commonly used backup methods
If you do need to do a wipe and install
How to erase and install Snow Leopard 10.6
For Snow Leopard Speed Freaks -
When I try to download Firefox for Android on my Epic 4G I get a message saying the item could not be found.
An update to quote mbrubeck:
Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.) -
After updating my 4s to ios6, I'm having the same problems with wi-fi switching to cellular on it's own and running up my data usage.....anyone else having this problem?
The iPhone is DESIGNED to switch to cellular data when asleep, unless it's connected to a power source, in which case it will stay logged onto the WiFi network. iPhones have ALWAYS behaved this way.
Either turn cellular data off at night, or leave your phone connected to a power source to continue the WiFI. -
i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD. Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.
If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo). -
problem with updated find my iPhone (FMi) app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem? I got the app as a regular update to my existing FMi app which worked great.
The problem is being reported in the news media, yes. Apparently someone at Apple jumped the gun and uploaded the update before it was ready. They'll probably issue another update shortly, I would expect, but you can go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. If you have a backup copy of the older version of the app, remove the newer version, restore the old version to iTunes on your computer, and resync.
Update: Well, that was certainly quick. As of a short time ago, various sites are reporting that the Find My iPhone app is no longer displaying the previous error message. If it still is for you, delete it from your iPhone and re-download from the iTunes Store.
Regards.
Maybe you are looking for
-
How to show crystal report from sap b1 ?
Hi expert all step 1 :I have a one button in sap b1 form when i click this button want to show crystal report. please tell me in step by step. please help me how to do this ?its our customer requriment...... Edited by: john_kk on Jul 7, 2009 9:
-
Exit : MWMRF212 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0212) Transaction LM03 Screen 2212 Hi, I need a new Field (Read Only) on the Screen SAPLLMOB /2212 So I enhance transaction LM03 with this Exit MWMRF212. 1. Copied Dynpro SAPLLMOB/ 2212
-
WLC 5508 - upgrade image + H-REAP
All, good day. I have a bug reported (CSCsy23704) for the H-REAP functionality. This sunday I will perform an image upgrade to try to solve this issue. What would it be the best image to go for?. After the upgrade, what will happen with the APs?, sho
-
Hi all, We have a webdynpro application with is creating a service notification using BAPI_SERVNOT_CREATE through RFC call. Now we need to add to this webdynpro application the ability of creating an attachment, as the user can do using transaction I
-
Can anyone offer suggestions on how I can have Photoshop CC open jpg files? It won't even open recent files , including files I was working on yesterday. Thanks.