I have the i7-980X, now Where's the Eclipse Plus BIOS support?

So I received the email about support for the i7-980x.  Then did a quick check of the page http://us.msi.com/index.php?func=newsdesc&news_no=893 and found the board listed as supported.
Went out an bought the CPU but now I find I cannot download the BIOS file "A7566IMS.110".
Anyone know where it is?   My i7-980x has some Folding to do!   No CPU allowed to be lazy around here!   
-v

It's not available yet
Quote
Went out an bought the CPU but now I find I cannot download the BIOS file "A7566IMS.110".
You can ask MSI Tech here: http://support.msi.com/  to send you A7566IMS.119 then,{should do the job too}
or be a bit more patient and wait until official 1.1 is out

Similar Messages

  • When I plug in my iPod and it syncs it says that a bunch of my apps cannot be loaded because my iPod does not have the latest software to support them, but I have done all of the iPod software updates and the same apps were working fine just weeks ago...?

    I plug in my iPod to charge from my computer and it syncs with my iTunes, but I've been getting a message that a list of 13 of my apps cannot be loaded onto my iPod because it doesn't have the latest software to support them. I have done all the software updates for my iPod and iTunes says it is completed up-to-date. Do I need to delete the apps and redownload them or what?
    Any help is appreciated! Thanks.

    ok well like lllaass said, most apps require 4.3 or later iOS software. chances are since the apps worked before, the apps themselves got updated and will no longer work with your software version.

  • I am trying to install xcode on a macpro running OSX 10.6.8 .  It installs, but with the error that there is no unix support.Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?

    I am trying to install xcode on a macpro running OSX 10.6.8 .  It installs, but with the error that there is no unix support.   Do I have to upgrade to Lion 10.7 to do this? And if so, is this a free upgrade if I have the extended 3 yr support?
    thx,
    Pandabig

    Xcode 4.x cannot be installed on Snow Leopard.  You need a 3.x.  So if that is what you used then yes, you need to install lion.   If connect.apple.com still alows registration or logins using an existing appleid then you could download the last xcode 3.2.6 for free.

  • HT3775 For some reason my Quicktime will not play a mpg file. It says that my computer does't have the proper codec to support the file. What can I do to fix this problem?

    For some reason my Quicktime will not play a mpg file. It says that my computer does't have the proper codec to support the file.

    The info in this thread should help you - https://discussions.apple.com/thread/3648239?start=0&tstart=0 

  • Does anyone have the #  for apple customer support?

    does anyone have the # for apple customer support?

    1 800 MY APPLE
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • I lost my logic express installation cd, i have the serial number and support ID, what can i do?

    Hey guys!
    I bought a new mac computer and i wanted to install my logic express 9 on this one, but when i open the box i see theres no installation disk and i have no idea where it might be so is there anything i can do to get the installation? i have the serial number and apple support ID
    Thank you! hope anyone can help me out

    Apple apparently doesn't do email support. You could try sending an email to Apple corporate and see if it kicks up any dust. Otherwise, see if you can contact the place you purchased the software.
    good luck,
    x

  • Anyone have the iTunes UK/Ireland Support Phone Number?

    Hello,
    Apple is a labyrinth of discussions and tutorials, I'd quite like the simple phone number - Xmas is coming, and we need it fixed in the next 24 hours!!!
    The Help and Support phone number would be greatly appreciated, for iTunes v 7, for Windows, in the UK and/or Ireland.
    Thanks!
    Camilla

    There is no specific help line for iTunes, technical support would generally be hardware related and is free for a limited period and a limited number of calls when you buy something like an iPod. Outside of the complimentary period per-incident support is £35 (UK) or €49 (Ireland). However the technical support numbers are 0870 876 0753 (UK) or 1850 946 191 (Ireland). Lines are open Monday-Friday 0800-1945 and Saturday 1000-1745. I don't know if these time are any different over the Christmas period but you can give them a try and see: Apple Contact page

  • I have the little plus sign for a new tab, but when I click on it, it won't open. I can't get any additional tabs open.

    I can also right click on the "new tab" sign, and click on new tab and still I can't get a new tab to open. Never had this problem before.

    iirc there is a compatibility issue with the Ask Toolbar, and I think your Sytem Details indicate you may be using that, try disabling or uninstalling the Ask toolbar to see if that solves the problem.

  • I do not have the email account to support iCloud how do I change it

    How do I change my ICloud ID on my Mac to a new email account ?

    You can't, make a new account, use that one.

  • Wheres this K8N Diamond Plus bios V1.16?

    I cant recall who said they had this bios here in the forums but I can only find bios 1.0 for this MB?

    Quote from: RogerP on 23-February-06, 00:33:56
    I have a copy and am using it, it does not do to many thing up front, but there are a few changes I BIOS parameters, but it still set the memory module default in correctly, at lest it does for my memory.  Also, some random unexplained error messages no longer pop up during boot.  In addition, my system is running solid.
    Send me a personal message with your e-mail address and I will send you a copy.  V1.16 comes with no grantee it will do any thing for you 
    Roger
    When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings.  It is almost impossible to estimate what your problem is without knowing something about it. 
    Thanks RogerP, I pm you.

  • MAC OSX 10.4.11 I finally succumbed to the constant irritating messages telling me that I didn't have the latest version. My old version and all my bookmarks have been deleted my Mac says it doesn't support Firefox! How can I recuperate my old settings?

    MAC OSX 10.4.11 I succumbed to the constant messages telling me that I didn't have the latest version, despite being happy with the one I had. My old version and all my bookmarks have been deleted and now my Mac says it doesn't support Firefox!!!!! How can I recuperate my old settings? in English

    Firefox 4 versions and later '''do not run on a PowerPC Mac''' (like yours) and require '''at least OS X 10.5 and an Intel Mac'''.
    The latest supported version for your os is '''3.6.27''' , you can download it from:
    http://www.mozilla.org/en-US/firefox/all-older.html
    1. Download a 3.6.27 copy of the Firefox from the above link
    2. Trash the current Firefox application to do a clean (re-)install.
    3. Install the new version that you have downloaded(3.6.27)
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so probably you won't lose your bookmarks or other personal data, if you don't already ''totally'' uninstall firefox(user data and settings like bookmarks, extensions, etc. located here: ~Library/Application Support/Firefox so you must uninstall it separately, to totally uninstall firefox).
    see also : [https://support.mozilla.org/en-US/kb/Installing%20Firefox%20on%20Mac Installing Firefox on Mac]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Why does bios 1.8 not have the option for 1T timing?

    I was just wondering why I don't have the option with bios 1.8 in my k8n neo2 platinum to run 1T command rate?  I use it with memtest+ and a64tweaker and it works fine..  I just want to turn it on without software..

    look around some more on the forum, there have been some BIOS betas released and can be studied about that may help you if you need a fix now... I know were alll eagerly awaiting aBIOS that will enable dual core for Neo 2 plat, at least I am, but then again I don;t KNOW for sure you'll have too do some research

  • Is there a way to use Edge as Navigation and Have the rest of the page in HTML

    Hi,
    I want to create a three-column CSS layout.  I want the left column (navigation) to be in Edge and have the remainder (plus header & footer) in static HTML.  I'm new to Edge and am hoping this is possible.  I know it will take some hard work, but before I get started, I'm wondering if this is possible, or should I just code the entire page in HTML? 
    Thanks!
    Jon

    hi jon,
    yes - this is totally possible.  here's a site i'm getting ready to take live next week.
    http://174.120.146.114/~spacemac/
    left nav bar is all edge - rest of the site standard html except for the animated edge banner on the homepage
    create your div placeholders and just drop the edge code in.
    hope this helps!
    best,
    keith

  • Do you have the sample of VC 6.0

    I want to develop my program for the optic switch
    in vc++6.0,I bought a PCMCIA-CPIB from NI yesterday,
    do you give me a sample?Thanks.

    Hello,
    When you install the GPIB driver, NI-488.2, you have the option of installing support for various languages, including Visual C++. Those examples can typically be found on a Windows system at:
    C:\Program Files\National Instruments\NI-488.2\Languages\Microsoft C
    Also, you might want to check out our Developer Zone resources on this topic at the link below:
    NI Developer Zone: GPIB Resources
    Regards,
    Josh Hernstrom
    Applications Engineer
    National Instruments

  • TS5185 Hello I bought a different phone and no longer have th iPhone, but I can not receive text messages from iPhone users what can I do, since I don't have the phone

    Just bought a new Galazy phone, and I can not receive messages from family and friends that have an Iphone, and I no longer have the phone.

    Contact Apple Support to deactivate iMesaage: https://www.apple.com/support/appleid/contact/

Maybe you are looking for

  • Two radio buttons in a single row of a table

    Hi All, Can we have two radio buttons in a single row of ADF TABLE. My requirement is that i have a list of submitted records. The user can approve or reject the records. All the records are displayed in the table. there will be two columns in the ta

  • I have a notebook that I need to print from to my printer at home. What options do I have?

    You may have purchased a new ePrint capable printer and find yourself wanting to print to it without having to create an email. Well, there is a way to simulate a traditional printing experience with ePrint from a notebook (or other mobile computer).

  • What is the use of class Class

    What is the use of class Class?

  • Itunes search not finding podcasts keywords

    So I created a podcast about a game called League of Legends. Link: https://itunes.apple.com/us/podcast/nexusdown-podcast/id578816992 when the podcast was created I included the following tags as shown: Tags: league of legends,leagueoflegends,lol,nex

  • Error building

    I created a dvd using only slideshows and menus. and last night it burned to disc properly and built fine. Now I get an error ,essage regaring one image in a slide show. I do not think I changed anything. I mean it did not woek last night, but at lea