I have the iPod touch and I had iTunes on my computer. I was prompted to update my itunes. When I was going to, it said first I should sync my ipod, so, with it connected to my laptop, and itunes on, I did so. Now that it finished, it's messed up!
First of all, I have an iPod Touch which is connected thru my Windows 7 laptop. It has been working find up til now. I have been prompted to dl the latest iTunes update, so I clicked to do so. But I was advised to sync my iPod first, which I did. As soon as that was finished, I got an Apple logo on my iPod and an an empty loading bar. I went to a discussion forum on Google where they said "uninstall iTunes" so I did. I then re-installed iTunes 10 and nothing changed, so I uninstalled it again. One thing I noted was that "Deborahs iPod" was no longer on iTunes when I did re-install it. So now I am at the point where I have a "dead" iPod with only Apple logo and bar against a black bg and nothing else. And I do not currently have iTunes installed on my laptop. My iPod is plugged into it. What do I do know??? Thanks very much for any help.
- Do you have to right boxes checked in the Tones pane of iTunes for the iPod to get them synced to the iPod:
- Were the tones purchased with the same account as all the other media on the iPod?
Similar Messages
-
I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station so that I can use my iPad?
THanks for your help!for #1
Frequently asked questions about Apple ID - Apple Support
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
for #2
Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy -
Hi!
I have tried to update OS from 4.3.5 to latest on Ipod touch but every time after 70% completing an error is prompted and say update cannot be completed. Please check the setting. Please guide in this respect to be updated.Disable the computer's firewall and antivirus during the download and update.
-
I had my schools iPad connected to my laptop on iTunes and then i looked at my iPad and i didnt have any of my apps. How do i get them back?
U must have synced with your library on your laptop thereby erasing the school apps , the only way to get them back on is by taking it back to school and get them to reinstall them back on using there library.
-
my itunes said to update my itunes and ipod touch and when i tried my itunes froze and i had to reset my computer and now my ipod has to restore and when it does it freezes what ddo i do?
This seems to fit yu symptom:
Hang during restore process: Following Troubleshooting security software will frequently resolve this error. This error can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694 -
I have my i phone connected to my laptop and am online. I go to icloud and want to back it up. It does nothing??
As deggie said, you are the victim of Activation Lock. Activation Lock is described here:
http://support.apple.com/kb/PH13695
Either you need to contact the previous owner to release the phone from Find My iPhone, or if you cannot contact the previous owner, it is likely you received a stolen iPhone and it will be useless to you. -
i have the 32Gb touch. i've downloaded 18Gb of music and it isn't letting add more, even though there's over 10Gb of space left. am i missing something?
Thats strange...no, I don't think you are missing anything. Try going into Settings>General>Usage and see exactly what is taking up what space. If it shows in there that you do indeed have ther free space, I'd try to reset the iTouch by holding down the Home Button and the on/off swithch at the same time. Ignore the "slide to power off" prompt and just wait. You will not lose any data, music or apps.
See if that helps. -
I ipod touch is not showing up on my computer when I plug in to update and download audiobooks.
I ipod touch is not showing up on my computer when I plug in to update and download audiobooks.
Hey khdewey,
Thanks for the question. I understand you are experiencing issues with your iPod touch being recognized in iTunes on your Mac. The following resource may provide a solution:
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
Follow these steps to resolve your issue:
1. Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
2. Install software updates on your Mac.
Note: If an iTunes update is available, apply the update.
3. Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
4. Disconnect other USB devices and connect your device directly to a USB port on your Mac.
5. Restart your Mac.
Additional Information
In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens and you're using Mac OS X v10.6 Snow Leopard, please follow these steps.
Thanks,
Matt M. -
my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?
If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
Regards. -
On my registered iTunes computer, the following message appears every time one plugs in a device and refuses to load said device to be synced: "This iPod cannot be used because the Apple Mobile Device service is not started". Each device has been registered onto this account and this computer, and all have worked finely in the past. I am so confused as to why now seemingly without reason, none of our apple devices (one iPod, two iPhones) are allowed to have music and other material downloaded onto them. Also, as a side note, they still are charged by plugging them into the computer, however they do not even show up on the left-hand sidebar in iTunes.
It should also be noted that for my iPhone it does not allow for the new update software to be uploaded; it just says that an error has occurred, nothing more.Try Here > AMDS > http://support.apple.com/kb/TS1567
-
Hi, I don't know which Apple ID I used to register my Ipod Nano. I had to restore my Computer and now I can't connect my iPod to iTunes again. I have my serial number and ECID. I'm using Windows, BTW, sorry!
Search your email for the word Logic (and set the search to All) and you should find the receipt (so long as you didn't delete it)
Other than that.. simply contact Apple directly and ask.. Make sure you have your transaction details ready for them as they will need it...
http://www.apple.com/contact/ -
Help Pls! I got 2 iPhones & an iPod connected to my laptop and...
Help Pls! I got 2 iPhones & an iPod connected to my laptop and I wanted to access my iPod iTunes library but only the iTunes for 1 iPod keeps popping up and I don't want the files on it to sync to my iPod. How can I separate the 3 libraries and open them separately? Please help. I'm becoming very frustrated.
There is only one library. The one on your computer.
All of the devices sync to this one library. -
My ipod touch 1st generation had itunes and usb symbol that stack-up there..i can't open my ipod because of that symbol.
You'll have to restore your device in iTunes. Connect in recovery mode, explained in this article:
iOS: Unable to update or restore -
On opening google I get the message:"WARNING! Your Flash Player may be out of date. Please update to continue" - on clicking ok I am diverted to Flash Player Pro download site?? Is this a Adobe product? And why even though i have the latest flash player version I repeatedly get the message?
This is not a message that Adobe is providing, and I recommend that you not click on the link. It sounds as though you might have malware on your computer.
For more information, see: http://malwaretips.com/blogs/warning-your-flash-player-may-be-out-of-date-virus/ or http://wasconet.com/how-to-remove-warning-your-flash-player-may-be-out-of-date/ -
i restored my ipod touch because it had a white screen but after i restored it the screen was still white what should i do?
Sounds like a hardware issue. Make an appointment at an Apple Store.
Maybe you are looking for
-
Need to print payment proposal and check
Hi guys, when i schedule my payment proposal, i need to be able to print it immediately at the proposal level so the client can see the proposal list and check.... right now its not printing... please advise thanks Brian
-
I'm probably going to move to Mac, but I'd like to know from Aperture users if they are overall satisfied or if Aperture 1.1 still has issues (I heard so much controversial opinions that I don't know what to think of it). In particular I'm going to m
-
Edited photo doesn't look like CR2 when imported back to LR 4.4
When I edit photographs in CS6 as initiated from LR 4.4 they look unaccountably different from the original CR2 file when imported back to LR. At first I thought it was a profile mismatch but that isn't the problem. Any thoughts on how to fix it?
-
Hi Guys, I am migrating from Exchange server to another in the same domain Is ther a script to migrate multiple mailboxes using powershell? I know I can use the GUI to migrate multiple mailboxes together but surely there is a faster way ? Thanks This
-
Security Suite won't download, even McAfee can't fix it
I have been working with both Verizon and McAfee techs to get installation of my security suite installed after my computer was out of order for more than a 30 day period. Apparently McAfee is now handling the security suite. Verizon is able to rem