I have the Logic pro 7.2,but how to upgrade to logic studio
Do i need show something to apple store to upgrade to logic studio of my logic pro 7?
thanks!
I purchased the upgrade to LS from LE and found, to my horror, that I needed the old LE serial. I have no idea where it is and Apple does not feel your pain. Now I have to go out today and buy the new LE just to run LS. It stinks, but that's life.
Similar Messages
-
Nelson May logic pro 9.1.8 won't upgrade to logic 9.0.2 - any takers
I have had this post sitting on Apple's discussion forums for 2 weeks now and don't have an answer I hope someone can help.
I have ML that is up to date and logic studio 9.1.8. When I try to run 9.1.8 (1700.67) (64-bit) I get to a splash screen that says "Searching for Audio Unit plug-ins (Apple:AUNetReceive).....and I have the spinning beachball of the death. I have to use force quit the app.
I downloaded the 9.0.2 update and the installer tells me that I dont need the update.
Anything going on here?
I have logic studio installed if this helps.
Mac Pro, OS X Mountain Lion (10.8.3), early 2009 8 core 2.4Ghz processors
MBP 2.4GHz 4MB RAM, 30"cine, MAC PRO 2.6 8 core 6GB RAM, Mbox, Neumann TLM-103, FCP HD 7. Pro Tools 8, Adobe Creative Suite, Reason 3.0, Macromedia Studio, ProAnimator, HVX200 with Firestore v4.0Logic Pro 9.0.2 is older than Logic Pro 9.1.8, that wouldn't work as an "update". You should however update to 10.8.4 or later. BUt for your issue you might want to try to delete the "com.apple.audiounits.cache" inside ~/Library/Caches.
-
Logic pro 9.1.8 won't upgrade to logic 9.0.2
I have ML that is up to date and logic studio 9.1.8. When I try to run 9.1.8 (1700.67) (64-bit) I get to a splash screen that says "Searching for Audio Unit plug-ins (Apple:AUNetReceive).....and I have the spinning beachball of the death. I have to use force quit the app.
I downloaded the 9.0.2 update and the installer tells me that I dont need the update.
Anything going on here?
I can't open or use logic 9
I have logic studio installed if this helps.Sorry to state the obvious (?) but you are not Updating/Upgrading.
You are DOWN grading if you are going from 9.1.8 to 9.0.2
If you want to downgrade, likely you will need to ERASE, and reinstall Logic.
Treatment -
This is ONE of the MANY reasons, I have held off on getting and iPhone. Because the ONLY option in getting the music onto it, is by using itunes, instead of just being able to drag and drop. This is annoying as F***.
I paid for and downloaded a ringtone from the iTunes store. It was working fine. Then I hoooked up my iphone to my bf's laptop, competely forgetting that it had already been synced to MINE, which is broken and toasted. For some reason, it deleted everything off my phone, I spent 3 hours trying to figure out how the **** to get music back onto my iphone using itunes. It's NOT a user friendly program, and being a computer savvy as I am.....I HATE USING IT. But unfortunately, I don't have a choice. So, I was able to get the two ringtones that I created with my free ringtone maker app BACK into my phone. But go figure, the one that I actually paid for, I can't get back on. It was in my itunes, and on my iphone...but had the exclmation mark beside it. I have already gone to the support page and followed the instructions for retrieving it. I have manually deleted it from my computer SINCE this discovery, by deleting it from itunes. So....to make sure yall are understanding this...I tried tracking it down by searching my computer....and I couldn't find it, although it was still listened on BOTH my itunes on my laptop AND in my iphone. I trued to manually delete it from the iphone....wouldn't work. So i manually deleted it from itunes.
My question is this....
HOW ON GODS GREEN EARTH DO I GET IT BACK!!!!????
It's only $1.29 canadian, but man, this program is ******* me off to no end.
It's stupid that Apple has completely restricted us. -sighs gritting her teeth- I just want my ring tone back. That's it. I can't even figure out how to redownload it....or if I can even do that.
Please someone help me. I'm soooo frustrated.
Thanks
CERNever mind I fixed it. Just in case anyone else has this problem, after you reinstall iTunes you have to delete all your old music, and if you have iTunes match all the songs you have saved on itunes match will display and you just have to download them to your Macbook.
-
I have the code for this project, but how do I add this user-defined exception that I want?
For a final VB.NET project, I have to write a project that ascends and descends a word or number chosen by the user.
This is what I want to do:
I want to add a user defined error that will stop the program and tell the user to input a value into the program if they did not. I do not know how to do this. I think I would use a Null Reference exception.
Here is the code for the project:
Module Module1 'VB.NET Final Project 12/30/14 . Option 3: Write a program to run two separate threads printing numbers or words (It can do both) in ascending and descending orders. The words have to be given by the user.
Dim Ascending As System.Threading.Thread = New Threading.Thread(AddressOf PrintAscend) 'Two threads are declared,
Dim Descending As System.Threading.Thread = New Threading.Thread(AddressOf PrintDescend) 'ascending and descending
Sub Main()
Console.WriteLine("VB.NET Final Project 12/30/14 . Option 3: Write a program to run two separate threads printing numbers or words (It can do both) in ascending and descending orders. The words have to be given by the user.")
Ascending.Start() 'starts first thread
End Sub
Sub PrintAscend()
Console.WriteLine("Please type in a word to print in ascending order.") 'the program asks for users to input a word
Dim input As String 'as a string
input = Console.ReadLine()
For i As Integer = 0 To input.Length - 1
Console.WriteLine(input.Chars(i)) 'prints the letters of the word in ascending order
Next
If Ascending.ThreadState = Threading.ThreadState.Running Then Descending.Start() 'starts second thread
End Sub
Sub PrintDescend()
Console.WriteLine("Please type in a word or number to print in descending order.")
Dim input As String
input = Console.ReadLine() 'user inputs the word that he wants
For i As Integer = input.Length - 1 To 0 Step -1
Console.WriteLine(input.Chars(i)) 'prints the letters of the word in descending order
Next
Console.WriteLine("Please press enter key to close the program, and thanks for your time.")
Console.ReadKey()
End Sub
End ModuleDejavu again?
Is your teacher instructing you to use a User Defined
error or do you just want to accept the user input, check it, give a message, and repeat?
It seems to me you are missing the basic program loop? This example checks the user input and then performs an action, then repeats. If the user enters Quit execution stops. Is that what you want to do?
Module Module1
Sub Main()
Console.Title = "Make a Decision"
Dim theline As String = ""
Do While theline <> "Quit"
Console.WriteLine(vbLf & "Enter a or b." & vbLf)
theline = Console.ReadLine()
Select Case theline
Case "a", "A"
Console.WriteLine(vbLf & ">> Result: You entered A.")
Console.WriteLine(vbLf & " ** Output Complete **" & vbLf)
Case "b", "B"
Console.WriteLine(vbLf & ">> Result: You entered B.")
Console.WriteLine(vbLf & " ** Output Complete **" & vbLf)
Case Else
Console.WriteLine(vbLf & """" & theline & """ is invalid.")
End Select
Loop
End Sub -
I got a new Macbook Pro and a Superdrive when i put in a DVD it reads it and puts a dick icon with the DVD name when i open that i have the auido and video folders but cant play the DVD anyone know why.
Open with iDVD.app in your applications folder.
or download VLC.app
http://www.videolan.org/vlc/download-macosx.html -
hi, i have a problem with the premiere pro,i bought but when i made the download say that i have to buy,but i bought,what i have to make?
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
snowleopard. have downloaded qt7. purchased qt pro. have the reg number from apple but now what? do i have to have my applications disc to go ahead? not tech savvy so be kind.
What if I don't have the Snowleopard disc?
Disc not required. Simply install QT 7.6.6 download available online at URL referenced in "To install QuickTime Player 7 on OS X Lion" paragraph 1. (I.e., QT v 7.6.6 Player is compatible with current versions of both Snow Leopard and Lion operating systems. Disc only required if you are running Snow Leopard OS prior to v10.6.3 update as implied by paragraph 2 of the same heading.) -
i have the macbook pro 13" retina display. Can I upgrade my 8gb ram to 16gb? my processor is 2.5Ghz intel core i5
To save space on the computer, Apple has decided to solder the memory onto the logic board on the MacBook Pro with Retina display and the MacBook Air, and that's why you can't add more memory after buying the Mac. This only applies to these computers, not for the other ones
-
I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?
The application Acrobat provides no language translation capability.
If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
Transfer the output into a word processing program that is localized to the appropriate language.
Do cleanup.
Be well... -
I have the latest photoshop cc 2014, but i dont see perspective warp in it, does anyone have an idea why
As you can see, its in Dutch, please comment
-
my computer crashed so i had to reformat, but the only problem is i lost my old itunes account, had to download new version. Now i have an ipod full of music but how can i place all my music I have on the ipod into my new itunes account??
Not if you first do a sync and have iTunes make a backup. However, if your only copy of the iTunes data is in the Touch, then you need to first copy the data to a new iTunes Library using third-party software such as Phone To Mac.
-
itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!
I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly. -
I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod. This is the first time trying to backup the iPod. I have authorized my computer. Still no luck.
Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
Also
- Reboot the computer
- Try another cable
- Try another USB port -
I went to my system preferences today and they are all gone except for my language and text icon! I have the language and text icon but that is the only icon that is displayed! where have my system preferences gone and how do i get them back??
Double click on the picture of the HD on your desktop, then look at the bottom of the window that opens.
First check the S.M.A.R.T. status on your HD: Applications > Utilities > Disk Utility > in the panel at left, select the first item in the list/your HD mechanism > look atthe bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
If S.M.A.R.T.status is "Verified," run Repair Disk: Boot from install disc (insert disc > restart > immediately hold down c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > open Disk Utility > select your HD in the panel on the left side > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions.
Maybe you are looking for
-
PT880 board problems, PLEASE HELP!!!!!!
someone please help. so my computer is running totally fine. i plug in my usb cable for my wifes digital camera like normal, but it smelled funny................. strange cause she has used this so many times. anyways at the boot up screen it che
-
How do I change my apple ID from an old one that doesnot exist anymore to a new old? When I purchased my macbook I had a mac.com email address but now have a me.com one. My computer is linked to the mac one. I cant update my apps....some one please h
-
Is there a way to define a layer for dynamic objects?
Hi all. Basically, I'm creating a number of dynamic text field objects in my Actionscript, but it looks like its being rendered on the wrong layer. I've written the actionscript in the first frame of my 3rd layer (which is masked), but the objects th
-
Hi , I need to delete all the records in the dtabase table and insert new data into it. I use the below code , but the delete returns with sy-subrc 4 and doesnt delete the records in table ? delete ZZVT2_BW. commit work and wait. insert ZZVT2_BW
-
Dear experts, i want to enter check no. which i received from my customer is it possible this is manual check no e-banking. thanks guro