I have this black box on my mac that announces everything I do. How do I shut it off?

It's movable, it comes with a voice and it wasn't there when I sent my macbook to the shop. How do I shut it off?

Turn off VoiceOver in the Universal Access or Accessibility pane of System Preferences.
(91866)

Similar Messages

  • My kids have been playing on my iMac and I now have a black box on the screen that describes where the cursor is or what I am typing etc.

    My kids have been playing on my iMac and I now have a black box on the screen that describes where the cursor is or what I am typing etc.
    Can anyone help me with removing this box
    I thought it might be subtitles but not sure?

    How about asking your kids? 
    Care to share which OS you are using? 

  • I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page.  There is also an oblong black box

    Hi - I'm not only having trouble waking up my MBP from sleep and having to restart repeatedly which is a pain in itself, but now when it restarted, I have these black boxes surrounding things, e.g., there is a black box around the red "close" button on the upper left corner of this page.  There is also an oblong resizable black box sitting on top of anything.  The content changes depending on the actions I take.  Right now it says, "You are currently on a close button.  To click this button, which closes the current window, press Control-Option-Space."  Right now I'm open in Firefox, but it doesn't matter if only Finder is open, it's still there.  I've tried closing all my applications and restarting and I also reset the PRAM.  It won't go away.  It's probably something simple, but I don't know how to get rid of it.  Any suggestions are welcome.
    Thanks,
    Janet

    Thanks so much.  I saw this on "desktop strangeness" immediately after I posted and tried to retract my question.  It worked perfectly.  I'm not sure how VoiceOver got turned on unless something happened when I was trying to wake up the computer.  I open the lid and it flashes whatever is open and then the screen goes black and I can't wake it up.  Still looking for the resolution to this.

  • I have these black boxes around my active pages, but I have voice-over disabled, any help?

    I have these black boxes around my active pages, I looked online for pointers but they all pointed to me disabling my voice-over in the universal access option on system preferences. My voice-over wasn't enabled and the boxes are still here, any help?

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. The Guest login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • I just upgraded to iPhoto '11.  When it was finished many pictures do not appear.  I have a black box but the information for the picture is still there.  Some are raw and some are jpeg.  Also lost all albums.  Can anyone offer assistance?

    I just upgraded to iPhoto '11.  When it was finished many pictures do not appear.  I have a black box but the information for the picture is still there.  Some are raw and some are jpeg.  Also lost all albums.  Can anyone offer assistance?  Using iOS 10.7.5

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • Anyone else have the black box of death with codes on your screen? (DVR)

    I've manually reset and still get this black box with codes on my TV sceen. It blocks out 90% of the screen.  I've also tried the online reset and they "cannot process" my request at this time!   The code is <00815BAC> [DCE2].  It's definitely DVR-related - my non-DVR TVs work fine.
    Anyone have any ideas what the problem is?  (thanks)
    Message Edited by heirloom on 01-03-2009 12:25 PM

    Hello,
    First, make sure that you have the latest Firmware updates installed. Refer to the article at:
    http://docs.info.apple.com/article.html?artnum=86117
    This will list all the available firmware updates for each machine.
    If you already have the latest firmware update installed, and are still having this problem, then I would suspect bad memory first.
    Try removing any expanded memory you have installed (leaving the factory memory installed) and see what happens.
    There were a lot of marginal memory modules sold before OS X was released.
    Many of these modules would work perfectly fine, and then fail completely once you installed (or tried to install) OS X 10.0
    This was a huge issue back then. Many people discovered that their memory modules were just slightly out of spec, and needed to be replaced with proper modules that were produced exactly to spec.
    Perhaps this is what is going on with your system.
    Since you have been using 9.2 on that machine, your expanded memory (if you have any) may be slightly out of spec, but was not noticed by OS 9.2.
    Hope this helps.

  • I am new to mac... and there is a solid black bar on my screen, that announces what page/icon I am on, then scrolls through every screen and announces what it is.  Can anyone tell me how to remove this?? Please? Thank you

    I am new to mac... and there is a solid black bar on my screen, that announces what page/icon I am on, then scrolls through every screen and announces what it is.  Can anyone tell me how to remove this?? Please? Thank you

    You may also find these Links of Interest...
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/switch101/     Switching from PC
    Find Out How (Video)
    http://www.apple.com/findouthow/mac/

  • I have a black box always open on my desk top , telling me what commands i am doing . it started when i pushed all the keys on my keypad !

    i have a black box always coming on my desk top , telling me every command that i am doing , it happened when i pressed all the keys on my keyboard.

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • This pop up box which tells me everything that I scroll over. How does one turn these off?

    So my daughter got on my mac and turned on this ID box which tells me what everything is that I scroll over. How does one turn these off?

    Turn off VoiceOver in the Universal Access pane of System Preferences.
    (62639)

  • I have a dynamic table that calculates the sum of all rows, no issue.  I'm struggling with pulling out a subtotal though.  I would like to have a check box in each row  that flags those rows and gives the sum of their total.  Any help would be greatly app

    I have a dynamic table that calculates the sum of all rows, no issue.  I'm struggling with pulling out a subtotal though.  I would like to have a check box in each row  that flags those rows and gives the sum of their total.  Any help would be greatly appreciated.

    Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
    var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
    var subtotal=0;
    for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
    nfSubtotal.rawVlaue=subtotal;

  • My 2008 Macbook OS X 10.5.8 keeps getting a black box appearing around files that are selected.

    My 2008 Macbook OS X 10.5.8 keeps getting a black box appearing around files that are selected.  The volume keys are also making wigits come up and there are duplicates of "restart" and "shut down" for some reason in that apple menu.... What's going on?

    Turn off VoiceOver in the Universal Access or Accessibility pane of System Preferences.
    (82298)

  • What is this black bar on my screen that  talks, I can't get it to turn off!

    What is this black bar on my screen that talks, I can't get it to turn off! It reads every little link on each screen and I can hardly browse because it will scroll back up to where it is reading. Help me!

    I just figured it out, hallelujah! In universal access I can turn off voice over. Thank you!

  • I have created some partitions on my mac. it can not be restored how can I restore it please?

    I have created some partitions on my mac. it can not be restored how can I restore it please?

    I hope you have a good backup.
    https://discussions.apple.com/message/18877374#18877374
    https://discussions.apple.com/message/16447467#16447467
    https://discussions.apple.com/thread/3646296

  • I have synced a family members iphone to my accont on itunes! how do i take it off mine and sync it to his account?

    i have synced a family members iphone to my accont on itunes! how do i take it off mine and sync it to his account?

    Try this site - they are free
    http://www.zedge.net/

  • I have a jailbroked iphone,and  it seems that it has some viruses how can I remove them from my iphone?

    I have a jailbroked iphone,and it seems that it has some viruses how can I remove them from my iphone?

    You have viruses because you jailbroke your phone, and now you're probably spreading them to other phones. Nice.
    Jailbroken phones are generally bricked for good. Throw it away, it's junk.

Maybe you are looking for

  • Help Required on Creating and Maintaining an Apple Network Without a Server

    Hi, I'm an external IT technician for a new educational block at a hospital who intend on using apple mac computers alongside windows computers running off of a windows server.. I usually deal with windows XP as an operating system so OSX is relative

  • No base value or Excise duty calculation coming at J1IS

    I am trying to create excise invoice by T code - J1IS with Ref. doc type - OTHR, but the system is not calculating the base value and excise duty Please help Regards, Pranav

  • Oracle BAM alert creation

    Hello, I need to create an Oracle BAM alert as follows: My DO has fields 'EventDate' of type DateTime and 'Error' as an int. I want to be able to send out an alert if I receive more than 100 records in the past 30 minutes with a error value 2. I have

  • Recurring Todo Problem Using WCAP

    Hello all! I have no problem using WCAP to complete a regular todo. When I try to complete a recurring todo using the same method, I cannot. I am currently setting the url.completed variable equal to the current date and time. Ex. ...?completed=04142

  • I have a new Retina MacBook Pro with no IDVD.

    I have a new Retina MacBook Pro with no IDVD. Can I purchase and download software to burn iMovies to a DVD or does new Mac not allow this either?