I have this in red banner ( SYSTEM UPDATE REQUIRED - A critical software update is needed for your browser. Click Allow to update now) what can i do about that ?
and after that i see firefox prevented this site ( any site i open ) from asking you to install software on your computer ..
can i make allow to the install or that kind of the Hack
thanks for all of you
I think I found it and I've fixed it on my computer. In Add-ons do you have an add on called Game Play Labs? If so, unistall it. I had 2 different ones that said Game Play Labs. I unistalled both and haven't had the red banner warning pop up at all.
I found the info by googling.
Similar Messages
-
Why is my jetpack recording an incredible amount of data usage? I'm getting alerts on a daily basis. All I do is read email and shop online. What is Verizon doing about this? I've used a data calculator and I shouldn't be using a third of what is being billed. A lot of nasty stuff on these posts.
> it was recorded that my jetpack used 13gigs in one day; this cannot be correct.
There is a common concern that many wireless users share on this subject. Unfortunately VZW holds all the cards when it comes to the actual details on what happened resulting with your final billing statement.
The only thing we as consumers can do is try to setup monitors on our own and funnel our internet traffic through those devices/applications. With a monitor in place there is a better chance that you can identify leaks and stop them before it makes it to your bill.
Keep in mind that data usage has nothing to do with what you are intentionally doing on the internet. Data usage relates to what is actually happening behind the scenes. If you, your neighbor, your dog or your toaster is online and consuming internet through your VZW device then VZW will hold you accountable for it. Its similar to a hose that you turn on in your yard, a utility company doesn't care who did it, they only care that they sent XYZ gallons of water to your residence. What worked well on your previous provider may not work well on VZW resulting in retries and increased usage for the same actions.
Don't get too hung up on the timestamps that VZW offers you in their alerts or reports. There are all sorts of examples where billing is delayed for various reasons. Use the timestamps as a clue, not as actual evidence that can be relied on during your investigation. -
I would like a messenger to let me know e-mail has arrived, you use to have a lamb do you still have that?
This is designed to be a user discussion area. To provide feedback directly to Apple you can go to http://www.apple.com/feedback/
There are a few applications out now that may be able to help you out. 1Password and LastPass are both password vault or lockers. They allow you to save passwords for applications and websites. That way you have a single password you use to keep the vault/locker secure and then all of your other passwords are stored for you so you don't have to write them down or try to remember them all.
https://agilebits.com/onepassword
https://lastpass.com/index.php -
MY DAUGHTERS IPOD TOUCH HAD NO AVAILABLE SPACE LEFT IN MEMORY SO WE TRIED TO CONNECT IT TO ITUNES TO SAVE PICS TO MY LAPTOP AND THEN UPDATE IT BUT ITUNES SAID IT DID NOT RECOGNIZE THIS DEVICE. SINCE THEN, IT IS ONLY DISPLAYING WHAT I WOULD SAY IS THE LOADING CIRCLE SPINNING AROUND AND AROUND THEN SHOWS THE APPLE LOGO FOR A SECOND THEN GOES BACK TO THE SPINNING CIRCLE. IT CANNOT CONNECT TO ITUNES NOW BECAUSE ITS LOCKED BUT WE CAN'T GET THE MAIN SCREEN TO OPEN IT WITH THE PASSWORD...PLEASE HELP
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Is there any better information on what exactly the 'iWork 9.3 Update' actually provides?
This is as verbal as Apple gets with update detail. Agree that more detail would be beneficial including bug fixes and bug creation.
-
Hi,
I like to update my site with the youtube widget and a youtube movie. But when I use the widget and put it on my website, adobe muse will close because of an error? Does anybody have the same issue?Help with using Adobe Muse CCHi,
could you please provide the complete error message or a screenshot of error window -
i am know using iphone 3g ios 4.1. i want to update version 4.2. i tried 2 or 3 times but update is not completing. its showing ''an unknown error occured(1015). Now what can i do?
That error is usually indicative that the phone was hacked/jailbroken. Was it?
-
When I have installed updates for Firefox in the past, I have always lost my bookmarks. Why does this happen and is there a way to avoid it? I want to install the new update for Firefox but I am afraid of losing my bookmarks again. What can I do about this?
Welcome to Apple Support Communities
Do not worry. Hold Sleep (the button you have at the top of the phone) and Home buttons at the same time until your phone restarts, and then try installing the iOS update again. -
I have upgraded my itunes to 1.4 on my windows xp service pk 3 system and now it won't recognize my ipod and let me sync it half of the time. What can I do about this?
It's not a "Reset" (except for the Reset of the iPod and possibly powering off the computer). It's meant to be a test to see if there might be interference between connected USB devices, or if the total power draw of all connected USB devices is too high for your computer's USB bus. If it always works when the iPod is the only connected device, but only sometimes works when you connect it with other devices, it may be one of those issues. When it works, the set of connected (or active) devices is OK.
If this is the case, you can go through a process of elimination to determine which device or combination of (active) devices causes the problem. NOTE: If one of your devices is an external hard drive that gets power from the USB port, power draw may be higher if it is currently active (spinning). Also, the power draw of the iPod may be higher when it is charging its battery and/or syncing.
Or are saying that the connected USB devices does not seem to matter, but doing a computer shut down always makes the iPod connect immediately after startup, but then the problem returns later? -
HELP!! i have a ton of videos of my boys stored in iPhoto..They played fine on my old OSX system (leopard). However, I just upgraded to snow leopard and then to mountain lion and now i can't open my videos at all anymore. HELP!!
Can you tell us about one or more of the video files - what are they? QuickTime? MP4? Something else? How did you create the video files in the first place?
I do a lot of video and when I upgraded to Snow Leopard I discovered that many of the QT videos that I had created previously (via iMovie & Final Cut) would not play correctly in QuickTime X - the bizarre behavior was that QT X acted as if my video files were only audio files! I reported this to Apple at the time but never heard anything back, and there hasn't been any change in later updates to QT X.
The solution was to (re)install QuickTime 7. But first look in your Applications > Utilities folder. When you upgrade from Leopard to Snow Leopard, the installer normally moves the old QT 7 program to your Utilities folder. If it's there, try using QT 7 to play one of your video files. If QT 7 is not there, you can download and install it from here Make sure you are running at least OS X 10.6.3 before you install QT 7. It's even better if you make sure you are running 10.6.8 which was the last release of Snow Leopard. -
one day before,i update my iphone5 system,but i really don't like the operation,i want change back to ios6.1.4,what can i do?
OK, I downloaded the utility, but during the installation process I was advised to shut down Outlook, or restart it after installation. I immediately cancelled the installation. Obviously, this thing is going to muck about with Outlook. I don't want anything to be touching or looking at any of my installed program unless I tell it too AFTER I fully understand what it is doing and how to reverse the whole process in case it gets mucked up.
I looked for a manual or some sort of documentation on the configuration utility, but there does not seem to be any.
Anyone have a link to program documentation for
iPhone Configuration Utility 3.6.2 for Windows?
I find it incredilble that there does not seem to be a stand alone, plug the usb cable in, and make a back up (system image) of an iPhone. After all, the thing seems to be hand held computer. Why not have a simple back up utility? Even the newer phones only have, what, a few GB. Lots of images would fit on an outboard TB disk.
Then if every thing gets FUBAR, simply restore the phone the the last working image.
Does no one keep controled squential backups of iPhones and iPads like you should do with any other computer, workstation or laptop that is a serious business tool?
iTunes for back-up. Does and business seriously do that?
iCloud? I'd be fired if the boss caught me putting client contact information on 'the cloud' or anything outside my secured hard drives. (Unless we have a specific paid contract for services).
My company does not even allow wifi in the office. Security begins with a hard wired connection.
sigh.... -
I have forgotten my passcode on my iPad. It was synced to a different computer that I no longer have. What can I do about this and if it at all possible without losing everything that was on it. Thanks for the help.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
````````````````
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
Cheers, Tom -
i upgraded my iphone os to 4.01 and i have not been able to sync to my computer. The error message I get says the Iphone connected is not recognised what can i do to solve this problem.
Did you try to connect in recovery mode? iOS: Unable to update or restore
Also check here: iOS: Device not recognized in iTunes for Windows
And make sure your security software is set up right: iTunes for Windows: Troubleshooting security software issues -
? What can i do about this, i will have cancel this if i can not use the programs
good evening i have just purchased lightroom and photoshop on a 12 months contract and its now saying i am running a operative system that photoshop no longer supports ? What can i do about this, i will have cancel this if i can not use the programs
unless that message is erroneous, you'll need to upgrade your os to use whatever you dl'd.
with a cc subscription, you can use cs6, cc and cc 2014.
if you need more help, what os do you have? -
The update for Pages says it is installing however it has been like this for days. Cannot open the app. What can I do?
Double tap the Home button to bring up the multi-tasking bar...tap & hold any app until they all start to wiggle...tap the red minus sign to remove every app shown. Tap the Home button when finished. Try to delete the app now.
Maybe you are looking for
-
WDTV Live has lost all content, Root Directory no longer showing on PC - HELP
Hi All, I disconnected my WDTV Live last night from my TV and connected directly to my router with a network cable. When I click on the WDTV under networks in my computer there is nothing there at all! no root folder, none of my files etc. I have tri
-
I am totally new to building GUI's. Everything I have picked up I did so online. From what I have learned this should work, but it throws all sorts of exceptions when I run it. package com.shadowconcept.mcdougal; import javax.swing.*; import java.awt
-
Datapump Import remap_Schema does not works
hi everybody, i've a problem with the import under 10.2.0.3.0 on AIX. I got an dump-file containing a full-databasedump. I just want to import one schema. Under imp i used the fromuser, touser clause. Now i tried it with the following parameters: imp
-
Changing the AUTH OBJ in table
hi experts, I am creating the Z* table, when i am creating the the AUTH obj under the table maintenance generator, it is coming as S_TABU_DIS, but i want to change this AUTH obj to S_TABU_NAM. looking forward for your valuable answers.
-
Last year I bought an iMac G5 with Logic Express preinstalled on the system, so I still have the install disks. I was wondering if I'd be eligible for the crossgrade price if I bought a MacBook Pro and copied the program over to the MBp hard drive. A