I Have to Disconnect & then Reconnect my External Hard Drive So It Mounts
I have an external hard drive that I use intermittently connected to my eMac. When the drive is left on, it always mounts - even if the computer has been turned off. However, if I turn the HD off for a week or so, it does not mount when I turn it back on again. In order to get it to mount, I have to detach the firewire cables and the power cord from the drive. When they are re-attached, the drive will mount when turned on again. Any clues? It is a pain in the neck and it concerns me that the drive may not be healthy.
First off since eMacs can't run 10.6, it is hard to tell if this might be closer to the old Panther Firewire bug or not.
Is the same behavior a problem on your MacBook Pro?
Similar Messages
-
I have backed up my disk using Time Machine. I then deleted the back-up files from my MacBook hard drive.
I then reconnected my external hard drive and find the files I deleted from my hard drive are also deleted from
my external hard drive. Can someone tell my what what happened? I'm confused.Hello,
Time Machine is not a good way to do that, when it eventually needs more room it deletes old Backups to make room.
If you really want to keep Files but remove them from the Internal Drive, then I'd get another external drive to copy or clone them to that is not used for TM. -
I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?
As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums). -
I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.sydababy wrote:
and then deleting them off of my computer.
BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
The number of people who have experienced terror by having a single external HD backup is enormous. One failure that WILL HAPPEN, and kaput,......all gone!
Dont do it, its all about redundancy, redundancy, redundancy.
follow here:
Methodology to protect your data. Backups vs. Archives. Long-term data protection
Deleting them off your computer is fine....having only ONE copy is extremely BAD.
The Tragedy that will be, the tragedy that never should be
Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret. -
I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!
This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
It constantly gets harder. -
I have moved my library to an external hard drive and changed the location of the iTunes media folder in Preferences, but every time I close and re-open iTunes, I have to do it all over again. How can I make the iTunes media folder change permanent? I have an older machine with Windows XP.
I don't believe mounting the hard drive should be necessary, unless you have several external drives and want your computer to recognise them as folders, rather than drives. I've never had to mount a hard drive, ever. If you don't know how to do it, then it shouldn't be necessary now.
Try this:
Prepare iTunes so that it can see the external drive.
Make a note of which drive-letter the external drive has been allocated. (Look in Windows Exploer)
Look at the file location for a song. Make sure it plays (and therefore that iTunes has found it). Highlight it and select File/Get Info/Summary>Where: and make a note of the drive letter for that song.
Close and shut down the computer.
The next time you turn the computer on again, connect the external drive
Before you start iTunes - check the external drive in Windows Explorer. Is it ready, does it have the same drive-letter that it had last time? Can you go into the drive and see the files on it?
Once you can, start iTunes. (If the drive lettter has changed, you need to work out why before going any further.)
If iTunes fails to find your external drive, you need to check where iTunes is looking for your Library.
Select the same song you checked before (presumably iTunes can no longer find it). Follow the procedure for locating it. You should be able to see where iTunes thinks the file is. It's the drive that counts. Which drive letter is iTunes looking at? Is it the same one that it was previously (which should also be the same one that the drive has now).
What happens, which step do you have problems with?
Message was edited by: the fiend -
I have vlc player movies on my external hard drive; can i watch these on the apple ipad?
i have vlc player movies on my external hard drive; i normally watch them on an windows laptop; can i watch these on the apple ipad?
<edited>
There's a vlc streamer app in the app store, but you would need to also install the streamer helper on the device where the movies reside. This works between my macbook and my ipad, but if you cannot access the external drive and install the helper file, then probably not -
I have moved my iPhoto to an external hard drive. so now I have to have the external hard drive connected to my laptop to view the photos. Now when I want to import photos into iPhoto from my media card, I don't have room to connect both devices at the same time as the usb ports are side by side. How do I import my photos from the media card to the external hard drive now?
First transfer the photos to a folder on your MacBook using Image Capture in your Utilities folder. Then move them to iPhoto.
BTW, you might want to invest in a cheap USB hub. -
I have all my music on an external hard drive. I just transferred all my files to a new hard drive . How do I sync all my files with my itunes library without losing all my playlists etc and keep everything intact?
Launch iTunes with the Option key held down, click on Choose Library, and specify it. If the external drive doesn't contain the iTunes database files, create a new library there and import that music.
If the library contains any rented movies, they won't play on a different computer.
(109334) -
I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
I have all my movies on an external hard drive. I want to be able to access them without copying everything to my iTunes. How can I do this?
I think DebinSC might mean using the movies without copying to the iTunes library?
Maybe the solution is to uncheck this box?
Or am I barking up the wrong tree? -
I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that? Looking for a solution that keeps me from re-ripping my CD collection.
Here are the official Apple Support instructions:
http://support.apple.com/kb/HT4527
Ciao. -
I have a new computer. I have copied Itunes library from an external hard drive. Itunes now tells me I cannot sync with my Ipod as it thinks the 20gb on the computer are different to the 20gb on my Ipod touch! What have I done wrong? How can I fix it? Alan
See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek -
I have just purchased my 1st Mac Mini,
I haven't imported any music yet except from purchased music.
I have 100gb of music on an external hard drive (already formatted to Mac OS Journaled.
I want my iTunes to be store on the External Hard drive, and to update my External Hard drive with new music I add to iTunes.
I also want to know the best way of adding my music on the Ext Hard drive e.g.: "add folder to library" or "import"
I plan on buying a Macbook Pro soon, and want to be able to use the same iTunes library.Launch iTunes with the Option key held down, click on Choose Library, and specify it. If the external drive doesn't contain the iTunes database files, create a new library there and import that music.
If the library contains any rented movies, they won't play on a different computer.
(109334) -
How do you transfer iTunes music and movies from an old PC to a new PC. I have all data svaed on an external hard drive.
This article should outline the options
http://support.apple.com/kb/HT4527
Maybe you are looking for
-
QoS: Multiple acl entries cannot be used in match-any in class Match_XY
Hello All, I'm getting below error while trying to add the two extended ACL in the class-map for classifying the traffic. Is there any way I can add two extenteded ACL in the same class-map for classifying the traffic. Error log: "QoS: Multiple acl e
-
Quicktime won't find updates after 7.2.1
I am just updated to Mac OS X 10.5.8 so that I could use itunes. But now I get a message that says that to upen the latest version of itunes (that I just downloaded), I need I need Quicktime 7.5.5 or later. I've tried "updating existing software" i
-
JDBC to RFC data is not showing in RFC palyoad
Hi, I am doing JDBC to RFC scenario. I configured the scenario while i executed the scenario JDBC communication chennal i can see the payload and its picked the data orom Oracle. when i check in SXMB_MONI message showing scucess and request for messa
-
Upgraded to 8.02, many songs in library won't play: "Song could not be used
A few days ago, I took the 8.02.20 update to iTUNES on my PC with Windows XP, I have latest service pack, yada yada. After the iTunes upgrade, I noticed that many of my songs in my itunes library won't play when I click on them. I get the icon of the
-
Mavericks won't download on my Macbook air
It says " An error has occurred".