I have to give the technical names to abaper for following fields to be pri

I have to give the technical names to abaper for following fields to be printed in the GRN print out
what r the table & field names for following
Buyer's name
  Project Number / Cost Center
  Suppliers Delivery Note Number
  Quantity Remaining (per Material)
like this way it is to be add in GRN print out

this details u can get in MKPF and Mseg tables
Go to se16
put the table name and put the material document number
u will get the entries
dobul click on the entrie
and find the data u need and the field name
for ex Suppliers Delivery Note Number
Reference field name XBLNR
hope this helps
Reward if usefull

Similar Messages

  • Display the technical name of the last level of the hierarchy

    Hello,
    I have a report with hierarchy. Each level of the hierarchy uses different infoObject. I want the report to display the technical name only for nodes from specific infoObject. For example if the infoObject uses 0cust_grp1 (for the first level), 0cust_grp2 (for the second level), 0cust_grp3 (for the third level) and 0customer (for the last level) and I want to show the technical name only for the 0customer infoObject. I know how to do it in WAD reports. Is there a way of doing it in the Query Designer?
    Please Advice,
    David

    David,
          Check the below possibilities.
    1. You can do that in a workbook.
    2. Create a copy of the same hierarchy and for the 0CUSTOMER object and nodes give tech names as text also.

  • The technical name of object QVIW zabcd is not valid

    Hello Gurus
    I am facing a weird problem.
    I run a query it works fine but when I try to save the view by right click -- save view it ask me for the Description and Technical name after putting this information I press save. Istead of saving it it gives me error "The technical name of object QVIW zabcd is not valid"
    Please help me asap
    Our system is on SP18 both for abap and Java

    Hi Bala Duwuri,
    Thanks for the input...
    Can you please give me your valuable inputs on this ........
    I have a standalone custom web dynpro application which needs to be linked to standard team viewer application.
    What I want is I should be able to select the employee from the Team Viewer iView and supply the information to the Custom Application so that it gives me output based on that.
    Right now am following the below link But in that no where they were talking about the webdynpro eventing.
    then how come two views will get linked fucntionally so that team viewer will pass the information to my custom WD application??????????????????? Please help
    Please give me a clear view on how to integrate the team viewer application with custom development WD application.
    If code is required pls provide that also.............
    I would appreciate the useful inputs with higher points.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/how%2bto%2bread%2binformation%2bfrom%2bthe%2bteamviewer%2bin%2bweb%2bdynpro
    Thanks in Advance,
    Dharani

  • Can i change the Technical Name of A Cube

    Hi friends,
    I have created a n Info Cube with the name ZXXTB02 follwed by the creation of Transformation and DTP . But Latter i found that I violated the naming convention,
    So can i change the name of my Info cube to Z1XXTB02 or I have to create a new Infocube ...
    Regards
    Anurag

    Hi Anurag,
    Unless you can do some modification at the table level, you cannot change the technical name of the cube, so may be better to copy this as a new cube and give the desired technical name.
    Hope this helps...

  • How to Rename the technical name and description of an infocube?

    Hi,
    How to Rename the technical name and description of an infocube?
    Thanx in advance,
    Ravi.

    Ravi,
    You cant change the Technical name of the cube but you can change the description of the Cube. If you want to have a Cube with the same properties and with different Techname and Description better you do copy from the base cube and rename as per your requirement.
    Regards,
    Gattu.

  • Finding the Sprite number if we give the member name

    Hi every one
    I want to find the spritenum based on the member name
    supplied
    for example i have a text field the member name of this field
    is "txtFirstName"
    Now if i want to find the sprite num through code then how
    should i go about it.
    I couldn't this so i need your help on this
    Thanks and regards
    Atul saxena

    Atul Saxena wrote:
    > Hi every one
    [Finding the Sprite number if we give the member name]
    http://groups.google.com/group/macromedia.director.basics/browse_frm/thread/4b20759601fd41 31/404003e8ea44676b?lnk=st&q=&rnum=3&hl=en#404003e8ea44676b
    Andrew

  • How to get the query design element meaning with the technical name ?

    In BI 7.0 query designer, we got error msg in Transport Connection like:
    Object 41PPHH3DICYQ56L2XJGXDRSMT is already being
    edited by user_id
    Choose 'Display object' or 'Cancel'.
    How to check what design element is for 41PPHH3DICYQ56L2XJGXDRSMT?  And what could cause the above error?
    We will give you reward points!

    You can collect the query and its elements in the transport connection. The under the technical name you will find this and the element.
    Hope this helps.
    Kumar

  • SAPBEX VBA - I need the technical name of my workbook

    Hello everybody,
    I have to solve the following problem:
    My task is to open an existing workbook (BE Analyzer) and paste a picture depending on the technical name of the workbook. I have already programed the the download of the picture, but I still need the technical name of the workbook I actual opened. I want to export this parameter with VBA and the help of RFC to my ABAP program on server. I think I have to use the package sapbex.xla, because this package know the technical name. Is it possible to link my module and the modules of the package sapbex.xla?
    I hope somebody is able to help me!
    Paul

    Ok, I found a solution...

  • Hierarchy in BW and showing the technical name

    I have created a Hierarchy off 0COSTCENTER.  I only want the technical names of the cost centers itself to show.  All other node levels I do not want the technical name to show up.
    Can someone let me know if this is possible?
    Thanks much,
    Jason

    We had the same problem. Unfortunately this setting only seems to be available for a query view. We were using web reporting anyway so we just converted the dataprovider to be a query view where this setting had been made. It's a bit ugly but it worked.

  • The technical name is Elastic Time - the time is now

    The technical name is Elastic Time - the time is now.
    http://www.sonicstate.com/news/shownews.cfm?newsid=5402
    This is the future of audio editing, and I sincerely hope Logic will provide this same (or superior) functionality very soon, as it is the wave of the future. I will be watching Pro Tools 4.7 LE very closely, and for obvious reasons.
    Hads

    I wonder what this is all about?
    http://docs.info.apple.com/article.html?artnum=301075-en
    "A new feature in Logic Pro 7.1 is Elastic Audio, which enables your recorded tracks to follow any tempo changes you make after you've recorded them."
    Does Logic 8 have this?
    I went to the blurb you mentioned and it didn't seem to explain how the Pro Tools "elastic audio" actually works. I Googled and found that Ableton Live apparently has it.
    I'd never heard about it before.
    Just curious 'cause I can't play my guitar to a click track and my timing varies quite a bit.
    Does anyone know if this is already part of Logic?
    Thanks, Johan

  • Display description of report rather than the technical name

    Hi all
    I have made a few reports using the Bex report designer that have been emailed to end users by the bex broadcast facility as a PDF
    However, when end users receive the email the attached PDF received has the technical name rather than the description.
    Does anyone know how to change this so that end users receive the PDF with the description rather than the technical name.
    Many thanks
    Forhad

    Yes the DOS 8.3 shortname format is the only accepted for the ThinkVantage button registry key.
    One general way to obtain DOS 8.3 formats from a path except from DIR /x in a CMD window is to use execute a VBSCRIPT file that uses the FileSystemObject class
    If you save the following sample vbscript code to a text file with .vbs extension and open it in file explorer it will write the short path of LSC.exe to a file text file named "Path_DOS83.txt":
    'Convert a full path to DOS 8.3 Shortname format and save to text file
    With CreateObject("Scripting.FileSystemObject")
    .CreateTextFile("Path_DOS83.txt",True).Write(.GetFile("C:\Program Files\Lenovo\Lenovo Solution Center\LSC.exe").ShortPath)
    End With
    What the code does it creates a File System Object instance and calls .CreateTextFile and writes the ShortPath of the File object obtained by the .GetFile function.

  • Why to give  New Run Name every time for  filling up the Set UP Tables

    Hi,
    While filling up the SETUP Tables we have to  give RUN Name.
    Every time while filling the SETUP Tables we have to give New Run Name.Is there any special reason for this
    every time we have to give NEW Run Name while filling up  the SET UP Tables?
    Thanks and Regards,
    Asim
    Edited by: asim khan on Apr 19, 2011 4:09 PM
    Edited by: asim khan on Apr 19, 2011 4:11 PM

    Hi,
    Thats true but my question is why to give NEW Run name every time while filling up the SET UP Tables.
    Why it wont take  old run name . Whats the logic behind this.
    Thanks for the Reply.
    Asim

  • How to identify the technical names in infoobjects inInfoset

    Hi,
    I want to design the query based ob infoset(SAP BW). Infoobjects shown in the infoset have different technical names.
    There are 4 infoobjects in query designer having same descriptions. How should I identify technical name of infoobjects and differentiate between them?
    Regards,
    Shital

    Hello Sheetal,
    Click on the Technical names  button in query designer, it will be in between context menu and table display.
    Regards,
    Pavan.

  • I had a power failure 2 days ago, have power now, but cannot send email from my iPad. Everything was fine before that. The box says cannot send mail, the user name or password for Gmail is incorrect. I haven't changed anything. I need help. Thanks

    Hi
    I had a power failure 2 days ago, my computer is running again, but now I cannot send email from my iPad using Cox or my gmail account. I am receiving mail in my Cox account but not my gmail account.It was working fine until the power failure. It keeps telling me, the user name or password for Gmail is incorrect. I have not changed anything. I don't know what is wrong. Can anyone help me? Thanks

    I agree, unplug and replug your router, then reset your iPad by holding down the sleep and home buttons, ignore the red power down slider, and wait til you see the silver apple. let it reboot and then try your connection.
    Chances are rebooting the router will help. You may also need to talk to cox. They may need to reset something on their end.

  • Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix.

    Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.

    Is this itunes on the iPad or on my computer? Thank you for the reply.

Maybe you are looking for