I have to hold the charger in place to charge!
I have a 16g ipod touch, and in order for me to charge it, I have to physically hold the charger tightly in place until I hear the beep. It starts charging, then when I release the charger and just let it sit there, it stops. That means I can never charge my ipod unless I am there to hold it in place. This CAN'T be normal right? Any suggestions? Thanks.
-J
Check with where you bought your Touch, either the socket or plug is bad. Sounds like a warranty issue.
Similar Messages
-
My iPhone 4 has been dead for 24 hours and I've been charging it for 12 hours and it still won't turn on. I have tried holding the lock button and home button down, even connected it to computer but nothing's happening, it randomly died on me.
Hi Lauren,
When troubleshooting power issues, we want to make sure we have followed all steps outlined in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
- Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
- Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
Learn about LCIs and corrosion.
- Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
- After at least 15 minutes, if:
- The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
- The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
- Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
- If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
- If the display turns on, go to step 4.
- If the display remains black, go to next step.
- Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
- If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks,
Matt M. -
My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected. We have tried holding the power and home button at the same time for several seconds, and the screen still stays black. Thanks!
Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!
-
my iphone 4 doesnt want to start . all it shows is the apple icon.i have tried holding the home button together with the lock button. nothing seems to work . please help.
Plug the iPhone in with the Wall Charger. Then while plugged in do the Reset again, hold both Home and Power buttons until the iPhone Restarts. This usually begins to happen in less than 20 seconds time.
If you this does not work you can try to Restore the Firmware on your iPhone. If you decide to do this, connect your iPhone to your computer with iTunes open. Hold both the Home and Power buttons until the iPhone is detected by iTunes in Recovery Mode, this takes about 20 seconds time. Restore your iPhone.
If this does not work, you can try to Restore the Firmware on your iPhone in DFU Mode. Connect your iPhone to your computer with iTunes open. Hold both Home and Power buttons for exactly 10 seconds, release the Power Button and keep holding the Home Button until iTunes recognizes the iPhone in Recovery Mode, about 20 seconds more time. Restore the iPhone.
If this does not work and you have Warranty or AppleCare Coverage take your iPhone to Apple for resolution of the problem. -
My IPhone 4 won't turn on , I have tried holding the power button , the home button for 20 secs and it won't work , tried putting it into DFU mode and nothings happened , last night I updated it to 6.0.1 since then it hasn' t turned on , what should I do?
I suggest charging it for several hours, then trying again.
-
Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i have to do?
You can try cleaning the headphone jack. However, I suspect that th headphone jack needs replacement.
Apple will only exchange your iPod for a refurbished one for this price.
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button. a 2 week old computer is not supposed to do this! it wastes all its time being so flashy that it just craps out all the time. sometimes i feel like i should have stayed with my virus covered PC. at least when it shut down randomly you could turn it back on, but with the macbook pro, it just keeps restarting itself over and over. need help with this, any answers?
Here's a novel thought. Take it back to the vendor. Should have done that one week ago.
-
My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.
see here
http://support.apple.com/kb/HT1808 -
I keep getting an error message that my cmputer needs to be shut down. A dark screen comes down and it says to restart. I have to hold the ON button until the computer shuts down. Then I can restart and it says it is sending a report to Apple. This seens to be happening a lot lately. Has anyone else had this problem?
Hi Carol...
error message that my computer needs to be shut down. It is like a dark screen comes down
That is referred to as a kernel panic.
Help here > Tutorial: Avoiding and eliminating Kernel panics | MacFixIt - CNETReviews -
i-phone shuts off, I have to hold the home and power button at the same time to get the icon to show up. Then have to hold the home button. I'm restoring my phone multiple times a day just to get it to work. help!
Are you restoring as new?
-
I dropped my iPhone 5c and it wont turn on but its constantly vibrating. I have tried holding the home and lock screen for a long time but nothing has happened. How can I fix this?
You make an appointment at the genius bar of your local Apple Store and get it serviced/replaced. You broke it. If you can't even force a reboot, there's nothing much more you can do.
-
Dear all, please hel!!
I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few secs, the iphone with the IOS 5 firmware will auto restart and freezes at the home screen which I can't unlock. It will then freeze for a few secs before repeating the restart phase again and again and again.
To solve this issue, I have to hold the "home" + "off" button to restart the phone. Afterwhich, it will restart the phone. However, although my stuff are still on the phone, all my sms are gone.
Can someone please assist urgently.
My data was transferred from another iphone 3GS which is running an IOS 4.0.1 to another 3GS running ios 5.0.1
Is there a serious compatibility issue with both firmware?
Please help.
Thanks!Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great. -
My bluetooth keyboard won't stay connected. I have to hold the power button to type
wireless keyboard says connected then connection lost. All I did was replace the batteries when the old ones died. Now I have to hold the power button just to type. Seems like a hardware problem not preferences. Any clues?
Hello:
Try resetting the PRAM and SMC.
Then delete a preference file (com.apple.bluetooth.plist) and restart.
Barry -
I have tried holding the home and sleep button for 20 seconds but still nothing happened.I have had this phone for 1 year and 10 months and I have never had any problems like this. Please Help!
it likely need repair
first you can try to connect it to AC though and try the home + powerbutton again -
My early Intel iMac running Snow Leopard will not boot past the apple logo. I have tried holding the c key and inserting the install disk, but nothing. What do I try next?
I have tried resetting PRAM and all other items listed in the Apple support site. This happened after an update to iTunes was added. Also this is happening to other people. Please help.
Maybe you are looking for
-
MacBook Pro Lower Case cracks.
Since I opened my MacBook Pro without Retina-Display 2012, the Lower Case cracks, if I press the upper and lower Case together. What can I do to solve this problem? Should I solve the screws a bit or should I thighten those screws? Thanks!
-
I am unable to share files satisfactorily over my home network between Mac and Windows
Please advise. I have an iMac with a LaCie Thunderbolt external hard drive and a Windows 7 laptop connected via ethernet network to a Belkin router with a WD MyBook Live Duo attached to it via USB. The iMac also has a virtual PC in it using VMWare.
-
Airport extreme with USB hard drive permissions problem may be parallels
I cannot access my external hard drive because of some permission problem. I know because I can see this through the disk repair utility. I've attached my external hard drive to my airport extreme. It originally came up well and worked fine. Then it
-
HT204506 Apple Pay - Watch - Adding a passcode on the watch is not working
Hi, I want to use Apple Pay and it asks me to add a passcode on the watch. The system is asking for a 6 number passcode but I keep taping on OK and nothing happens. Anyone else in the same situation?
-
Remote site agents are getting the error "Cannot change agent state because the phone is out of service." But the phone is operational. No network changes have occured so this has me confused as these agents were working yesterday. Anyone ever experi